Promax HD Ranger Lite User manual

HD RANGER Lite
TV & SATELLITE ANALYSER
- 0 MI2008 -

RANGER
USER’S MANUAL
SAFETY NOTES
Read the user’s manual before using the equipment, mainly "SAFETY RULES"
paragraph.
The symbol on the equipment means "SEE USER’S MANUAL". In this manual July
also appear as a Caution or Warning symbol.
WARNING AND CAUTION statements July appear in this manual to avoid injury
hazard or damage to this product or other property.
MULTIMEDIA CONTENT
You can access instantly to any chapter by clicking on the title of the chapter in the
table of contents.
Click on the arrow at the top right of the page to return to the table of contents.
Throughout this manual are boxes with the symbol . It identifies a direct
access to an explanatory video related to the function where it is. User has to click on
this icon to watch the video.
All videos are in the PROMAX channel on YouTube, which is accessible through the
PROMAX website at: www.promaxelectronics.com
USER'S MANUAL VERSION
Version Date Software Version
3.0 July 2015 16.2
Please update your equipment to the latest software version to maximize its
capacity.

What's new in manual version 3.0
New tool: "Task Planner".
New tool: "LTE Ingress Test".
Identification of HEVC standard (H.265).
Several minor corrections.
Screens updated to r16.2.
Menus updated to r16.2.
What's new in manual version 2.0
New tool: Field Strength meter.
Improvement in importing files tool.
New constellation zoom.
New function for controlling JESS devices.
PER measurement.
Badwidth power and link margin measurement.
PEAK and RMS detector type.
Reference capture in Spectrum Analyser.
Improved LNB supply management.
Spectrum Analyser screen 3/3 available por analogue signal.
Datalogger for "Attenuation test" tool.
Interactive service detection and identification.
Independient frequencies for SatCR slots.
Protection by PIN for some data fields and recovery PIN system.
DiSEqC commands multiple selection.
Improvement in copying files to USB with filename > 8 letters.
Exclusive key for PLP identification.
Screens updated.
Menus updated.
"Specifications" restructure.
Several minor corrections.
New option in Spectrum Analyser: "Dashed BW".
Marker function improved.
New options in "Preferences": "Boot Screen"; several in "Equipment"; "Security".
Function to recover to the equipment the image from video output.

RANGER
USER’S MANUAL
SAFETY RULES
* The safety could not be assured if the instructions for use are not closely
followed.
* Use this equipment connected only to systems with their negative of
measurement connected to ground potential.
* The AL-103 external DC charger is a Class I equipment, for safety reasons plug it
to a supply line with the corresponding ground terminal.
* This equipment can be used in Overvoltage Category I installations and
Pollution Degree 2 environments.
External DC charger can be used in Overvoltage Category II, installation and
Pollution Degree 1 environments.
* When using some of the following accessories use only the specified ones to ensure
safety.:
Rechargeable battery
External DC charger
Car lighter charger cable
Power cord
* Observe all specified ratings both of supply and measurement.
* Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
* Use this instrument under the specified environmental conditions.
* When using the power adaptor, the negative of measurement is at ground
potential.
* Do not obstruct the ventilation system of the instrument.
* Use for the signal inputs/outputs, specially when working with high levels,
appropriate low radiation cables.
* Follow the cleaning instructions described in the Maintenance paragraph.

* Symbols related with safety:
Descriptive Examples of Over-Voltage Categories
Cat I Low voltage installations isolated from the mains.
Cat II Portable domestic installations.
Cat IIIFixed domestic installations.
Cat IV Industrial installations.

July 2015
TABLE OF CONTENTS
1INTRODUCTION ..................................................................................... 1-1
1.1 Description .................................................................................... 1-1
2SETTING UP ........................................................................................... 2-3
2.1 Package
Content ............................................................................ 2-3
2.2 Power ........................................................................................... 2-4
2.2.1 First
charge................................................................................ 2-4
2.2.2 Charging the battery ................................................................... 2-4
2.2.3 Charge/discharge
times ............................................................... 2-5
2.2.4 Usage
Tips................................................................................. 2-5
2.3 Equipment
Details .......................................................................... 2-6
2.4 Switching On/Off the equipment ....................................................... 2-8
2.5 Screen Icons and Dialog boxes ......................................................... 2-9
2.6 Menu
Tree ....................................................................................2-10
2.7 Controls .......................................................................................2-14
2.7.1 Joystick ....................................................................................2-14
2.7.2 Keyboard
shortcuts ....................................................................2-15
2.7.3 Softkeys...................................................................................2-20
2.7.4 Virtual
Keyboard........................................................................2-20
2.8 StealthID
Function.........................................................................2-21
2.9 Settings and Configuration..............................................................2-23
2.9.1 Settings
Menu ...........................................................................2-23
2.9.2 Video & Audio settings................................................................2-26
2.9.3 Preferences
Menu ......................................................................2-26
3MEASUREMENT MODE ...........................................................................3-31
3.1 Introduction..................................................................................3-31
3.2 Operation .....................................................................................3-32
3.3 GENERIC
Signal.............................................................................3-34
4SPECTRUM ANALYSER MODE .................................................................4-35
4.1 Introduction..................................................................................4-35
4.2 Mode of operation..........................................................................4-35
4.3 Screen
Description.........................................................................4-36
4.4 Joystick Operation in Spectrum Analyser mode ..................................4-40
4.5 Specific Options in the Spectrum Analyser Mode ................................4-42
4.6 Select and edit parameters .............................................................4-44
4.7 Locking
a signal.............................................................................4-44
4.8 Satellite
Identifier..........................................................................4-45
5TV MODE ...............................................................................................5-46
5.1 Introduction..................................................................................5-46
5.2 Operation .....................................................................................5-46
5.3 Screen
Description.........................................................................5-47
5.3.1 TV MODE: TV views....................................................................5-47
5.3.2 TV MODE: Radio views ...............................................................5-51
5.4 Specific Options for TV Mode ...........................................................5-52
5.5 IRG
Descriptor ..............................................................................5-52

July 2015
6GENERAL MENU OPTIONS .....................................................................6-54
6.1 F1:
Tuning....................................................................................6-54
6.2 F2:
Signal Parameters....................................................................6-58
6.3 F3:
Tools......................................................................................6-59
7TOOLS...................................................................................................7-60
7.1 Constellation.................................................................................7-60
7.1.1 Description ...............................................................................7-60
7.1.2 Operation .................................................................................7-60
7.1.3 Menu
options ............................................................................7-62
7.2 Echoes .........................................................................................7-63
7.2.1 Description ...............................................................................7-63
7.2.2 Operation .................................................................................7-63
7.2.3 Menu
options ............................................................................7-65
7.3 Attenuation
Test............................................................................7-65
7.3.1 Description ...............................................................................7-65
7.3.2 Operation .................................................................................7-66
7.3.3 Menu
options ............................................................................7-68
7.4 Datalogger ...................................................................................7-69
7.4.1 Description ...............................................................................7-69
7.4.2 Operation .................................................................................7-69
7.4.3 Menu
options ............................................................................7-75
7.5 Screen and Data capture (Export key) ..............................................7-76
7.5.1 Description ...............................................................................7-76
7.5.2 Operation .................................................................................7-76
7.6 Explore
Channel Plan .....................................................................7-78
7.6.1 Description ...............................................................................7-78
7.6.2 Operation .................................................................................7-78
7.6.3 Menu
options ............................................................................7-80
7.7 LTE Ingress test ............................................................................7-80
7.7.1 Description ...............................................................................7-80
7.7.2 Operation .................................................................................7-81
7.7.3 Menu
options ............................................................................7-83
7.8 Field
Strength ...............................................................................7-83
7.8.1 Description ...............................................................................7-83
7.8.2 Operation .................................................................................7-83
7.8.3 Settings ...................................................................................7-85
7.8.4 Creating and importing calibration tables ......................................7-86
7.9 Task
Planner.................................................................................7-88
7.9.1 Description ...............................................................................7-88
7.9.2 Operation .................................................................................7-88
7.9.3 Timer.......................................................................................7-91

July 2015
8INSTALLATIONS MANAGEMENT.............................................................8-92
8.1 Description ...................................................................................8-92
8.2 Operation .....................................................................................8-92
8.3 Installation
Management ................................................................8-93
8.4 Create a new installation ................................................................8-97
8.5 Tools ...........................................................................................8-97
8.6 Importing Data from USB ...............................................................8-98
9CONNECTING TO EXTERNAL DEVICES.................................................. 9-100
9.1 Mini-USB
connector...................................................................... 9-100
9.1.1 Connecting the HD RANGER Lite(host) to an USB memory (device). 9-100
9.1.2 Connecting a computer (host) to the HD RANGER Lite (device)....... 9-102
9.2 RF
Connector .............................................................................. 9-103
9.2.1 DiSEqC
commands................................................................... 9-103
9.2.2 SCD/EN50494
(SatCR) commands ............................................. 9-104
9.2.3 SCD2/EN50607
(JESS) commands ............................................. 9-105
10 SPECIFICATIONS ............................................................................. 10-108
10.1 General Specifications ................................................................ 10-108
10.2 Measurement Mode.................................................................... 10-110
10.3 Spectrum Analyser Mode ............................................................ 10-113
10.4 TV Mode................................................................................... 10-115
10.5 Tools ....................................................................................... 10-116
11 MAINTENANCE ................................................................................ 11-117
11.1 Considerations about the Screen.................................................. 11-117
11.2 Cleaning Recommendations ........................................................ 11-117
ANNEX 1 SIGNALS DESCRIPTION .............................................................. 1
ANNEX 2 HOW TO POINT A DISH ANTENNA ..............................................15
ANNEX 3 DiSEqC COMMANDS....................................................................23
ANNEX 4 REMOTE CONTROL COMMANDS ..................................................33
ANNEX 5 MULTIMEDIA CONTENT ..............................................................56

July 2015 1-1
TV & SATELLITE ANALYSER
HD RANGER Lite
1
1 INTRODUCTION
1.1
Description
The new
HD RANGER Lite is the sixth generation of field meters that PROMAX
launches. As each new generation, it represents an evolution from the previous,
since it integrates the latest technological innovations and develops applications
for the new demands and needs that have emerged in recent years.
The new
HD RANGER Lite has been created with the aim to make easy the
user experience. From its ergonomic design and stylized lines to the reduction of
keys and the easy use of its interface, everything has been designed so the user
has a simple tool to use but powerful and useful.
Figure 1.
The
HD RANGER Lite is a universal analyser that covers several of the most
popular standards of the DVB family, as well as formats such as MPEG-2 or
MPEG-4.
1Trademark of the DVB - Digital Video Broadcasting Project.

1-2 July 2015
4
Besides the basic functions of TV meter and spectrum analyser for terrestrial and
satellite band, it provides additional tools, such as the diagrams constellations or
the echoes detection.
The
HD RANGER Lite has an application to manage data generated at each
installation. This feature helps the user to manage information generated so he
can access it at any time or download it to a PC for further analysis.
The
HD RANGER Lite has been designed and developed entirely in the
European Union. A multidisciplinary team of highly qualified professionals has
dedicated effort and commitment to the development of a powerful, efficient and
reliable tool. During the manufacturing process, all used materials have been
subjected to a strict quality control.
In an effort to facilitate its work to professionals, our long experience ensures an
after sales quality service, which includes software updates and upgrades for
free.
Figure 2.
Click here to watch this video: Introducing the HD RANGER Series

July 2015 2-3
7
2 SETTING UP
2.1
Package Content
Check that your package contains the following elements:
HD RANGER Lite Analyser.
External DC charger.
Mains cord for external DC charger.
Car lighter charger.
"F" Adapters (2 units).
• "F" / H - DIN / H Adapter.
• "F" / H - "F" / H Adapter.
Support belt and carrying bag.
USB On-the-go (OTG)(A) Male - Mini USB (B) Male cable.
USB cable (A) Female - Mini USB (B) Male cable.
Quick Start Guide.
NOTE:Keep the original packaging, since it is specially designed to protect the
equipment. You July need it in the future to send the analyser to be
calibrated.

2-4 July 2015
9
2.2
Power
The
HD RANGER Lite is powered by a 7.2 V built-in rechargeable Li-Ion battery
of high quality and long operation time.
This equipment can operate on battery or connected to the mains using a DC
adapter. An adapter is also supplied to use with the power connector car
(cigarette lighter).
2.2.1 First charge
The equipment comes with the battery half charged. Depending on the time
elapsed from first charge and environmental conditions July have lost some of
the charge. You should check the battery level. It is advisable a first full charge.
2.2.2 Charging the battery
Connect the DC power adapter to the equipment through the power connector on
the left side panel (see figure 3).
Figure 3.
Then connect the DC power adapter to the mains via the mains cord. Ensure that
your mains voltage is compatible with the adapter voltage.
For a fast charging of the battery is necessary to switch off the equipment.
If the equipment is ON, the battery charging will be slower, depending on the
type of work you are doing. When connecting the equipment to the mains the
mains connected symbol appears inside the battery icon.

July 2015 2-5
1
The CHARGER led indicator (red colour) shows the battery status:
On: Battery charging.
Off: Battery full charge.
Blinking: Battery failure or no battery.
When switching on the equipment, the battery voltage is checked. If the tension
is too weak to start, the equipment does not start up. In this case please charge
the battery immediately.
2.2.3 Charge/discharge times
Average charging time with the equipment off (fast charge):
3 hours to achieve an 80% charge.
5 hours to achieve a 100% charge.
With the equipment on (slow charge):
5 hours to achieve an 80% charge.
8 hours to achieve a 100% charge.
Average discharge time (with external supply disabled):
With the battery full charge the average battery time is 3 hours.
With the battery at 80% charge the average battery time is 2 h.
2.2.4 Usage Tips
The battery is losing storage capacity as you go through its life. Contact your
PROMAX distributor when necessary to replace the battery.
To prolong battery life the user should follow these tips:
In case of providing a long inactivity period of the equipment it is
advisable to make every 3 months a charge / discharge cycle and a
subsequent partial charge (40% aprox.).
It is advisable to keep it in a cool place and away from heat.
You should avoid keeping the battery for a long period of time at full load
or fully discharged.
There is not necessary to wait to fully discharge before a charge because
these batteries have no memory effect.

2-6 July 2015
1
2.3
Equipment Details
Front View
Figure 4.

July 2015 2-7
1
Lateral view
Figure 5.
Top view
Figure 6.

2-8 July 2015
1
2.4
Switching On/Off the equipment
This analyser is designed for use as a portable equipment and it does not require
any previous installation.
►Switching On:
Slide for a while (approximately one second) the power slide switch
located on the left side of the equipment.
When all indicators light up at once release the switch, which returns to
its rest position.
The boot screen (user can select the boot screen from "Preferences"
menu) appears and also a progress bar that indicates the system load. At
the top left corner it shows the equipment model and the installed
software release detected.
After the system load, the last screen before shutdown appears.
►Switching Off:
Slide for a while (approximately one second) the power slide switch
located on the left side of the equipment.
When the screen goes off release the switch, which returns to its rest
position.
The starting display picture appears and the progress bar showing the
system shutdown progress.
►Reset:
Press the key for 5 seconds. The equipment automatically turns off.
Use only in case of system crash.
In the PREFERENCES menu
(press 1s), APPEARANCE tab, option
"Power Off" the user can activate the automatic shutdown option, selecting a
waiting time (time without pressing any key) after which the equipment turns off
automatically.

July 2015 2-9
1
2.5
Screen Icons and Dialog boxes
On the screen are some icons that provide useful information to the user about
the current status of the instrument.
Battery charging. Warning.
Battery not charging.
Yellow level indicates
charge left. USB flash drive inserted.
USB in serial port mode.
LTE filter enabled.
Satellite band. Current installation.
Current voltage, 22 kHz
signal and LNB power
level SATCR (SCD/EN50494)
commands enabled.
Terrestrial band. JESS (SCD2/EN50607)
commands enabled.
Compressed
installation. Task scheduled.
OK.
Multi-function Joystick
enabled. Two-letter code
indicates the exact function:
Searching.
FR Frequency tuning.
CH Channel tuning.
SP Span change.
MK Marker moving.
EC Echo/zoom change.

2-10 July 2015
2
2.6
Menu Tree
SPECTRUM ANALYSER MENU
Only available for digital channels
Option available for terrestrial band Option available for satellite band

July 2015 2-11
2
TV MENU
MEASUREMENT MENU
Only available for digital channels
Only available for analogue channels
Option available for terrestrial band Option available for satellite band

2-12 July 2015
2
SETTINGS MENU
Option available for terrestrial band Option available for satellite band