protech HDM-2400W User manual

HDM-2400W
24”HDMonitor
32”HDモニター
Operating Instructions
取扱説明書
Beforeoperatingthesystem,pleasereadthismanual
thoroughlyandremainitforfuturereference.
ご使用の前に必ずこの取扱説明書をお読みください。
なお、取扱説明書は必要に応じてご覧になれるよう
大切に保管してください。

安全上の注意
2
WARNING
Toensureproperusage,besuretoreadtheSafetyPrecautionsthoroughlybefore
usingtheproduct.Alwayskeepthismanualavailableforfuturereference.
■Ifsomethingunusualhappens;forexample,itemitssmoke,anunusual
odororsound,turnthepowerswitchoff.
■Donotplaceanycontainersoffluidsoranymetalobjectsonit.
Warning
Prohibition
■Donotinsertordropobjectsintoanopeningsuchasventholeinit.
■Donotwetitwithfluidssuchaswater,perspirationorseawater.
Besuretofollowthesafetyinformationtopreventinjurytotheuserandother
persons,aswellasdamagetoproperty.
Thefollowingdescrivesthemeaningofsafetysymbolsandsignalwords.
Indicatesapotentialyhazardousoperationthatcould
resultindeathorseriousinjurytotheuser.
Caution Indicatesapotentialyhazardousoperationthatcould
resultinminorormoderateinjurytotheuserordamage
totheproperty.
■Ifitisdroppedorsubjectedtoexcessiveshockorisdamaged,turnthe
powerswitchoff.
■Ifwateroranyotherfluidentersit,turnthepowerswitchoff.
■Ifaforeignbodyentersit,turnthepowerswitchoff.
Prohibition
No
disassembly
Keepwater
away
Doingsomaycauseoverheating,fire,electricshock,injuryormalfunction.
Takecareespeciallywhenusinginrainyorsnowyweatheroratthe
waterside.
■Donotdisassemble,modifyorrepairit.
Doingsomaycauseoverheating,fire,electricshock,injuryormalfunction.
Forinspection,overhaulorrepair,contactthepurchaseshopor
PROTECHServicecenter.
■Donotsetuporleaveitwhereverwateroranyotherfluidisused.
Doingsomaycauseoverheating,fire,electricshock,injuryormalfunction.
Keepwater
away
※Failingtodosomaycauseoverheating,fire,electricshock,injuryormalfunction.
※ContacttheshopofpurchaseorPROTECHServicecenter.
Doingsomaycauseoverheating,fire,electricshock,injuryormalfunction.
Doingsomaycauseoverheating,fire,electricshock,injuryormalfunction.
PROTECHacceptnoliabilitywhateverforincidentaldamagesarisingoutoftheuse
orinabilitytousetheproduct,including,butnotlimitedto,corruptionorlossof
data,lostbusinessrevenueorsuspensionofbusinessoperations.
PROTECHacceptnoliabilitywhateverfordamagesarisingfromimproperusenot
conformingtotheinstructionsintheinstructionmanuals.

各部名称と働き
NamesandFunctionsofParts
接続方法
Connection
調整および設定
AdjustmentsandSettings
外形寸法図
OutsideView&Dimmensions
仕様
Specifications
38
39
4
26
18
Contents目次
Frontpanel 4
Rearpanel 7
Functions(MENU) 10
機能(メニュー)
フロントパネル
リアパネル
HDM-2400W
Contents
3

NamesandFunctionsofParts各部名称と働き
4
フロントパネル
Frontpanel
Screen
Thedisplayscreenis24.1inchesdiagonalLCD(Activearea:518.4mm324.0mm）.
スクリーンは24.1インチ液晶、画面寸法518.4mm324.0mmです。
STANBYswitchandIndicatorLED
Turnon/offthedisplay.
WhenthepowerissuppliedbyturningonthePOWERswitchorACINswitchontherearpanel,
theSTANDBYindicatorLEDlightsontotheRED.
TurnontheSTANDBYswitchtodisplaythepictureonthescreen,andtheLEDturnsontotheGREEN.
画面をON/OFFします。
リアパネルの電源スイッチ(POWERスイッチまたはACINスイッチ)をONすると、表示LEDが赤く点灯します。STANDBYスイッチを
押して画面をONするとLEDは緑色に点灯します。
TALLYindicator(RED/GREEN/BLUE//LEFTR/G/B//RIGHTR/G/B)
LightsupwhenatallysignalisinputtoPARALLELREMOTEconnectorontherearpanel.
背面のPARALLELREMOTEコネクタに入力されるタリー信号により赤緑青に点灯します。
MENU/RETURNbuttonandENTERknob-button
＜MENU＞
BypressingtheMENUbuttondisplaytheMENUonthescreen.
AndthenbyrotatingtheENTERknob-buttonselectthemenuitem
andbypressingitsetthesetting.
BypressingtheRETURNbuttonreturnthecursor.
FortheinformationontheMENU,seepage10-17.
MENUボタンを押すと、メニューが画面にでます。
＜ENTER＞ ENTERボタンを回して項目を選択し、押すと設定(値)が入力(確定)されます。
＜RETURN(MENU)＞ MENUボタンのLEDが点灯しているとき、
RETURN(MENU)ボタンを押すと、カーソルがもどります。
MENUbutton ENTERknob-button
LED
※メニューおよびメニュー操作の詳細は10〜17ページ
HDM-2400W
NamesandFunctionsofParts

5
フロントパネル
Frontpanel
F1/2/3/4/5/6/7(USERASSIGNPresetFunction)buttonsandindicationLEDs
PressingabuttonexecutesthefunctionassignedtoeachbuttoninMENUsetting.
Whenthefuncionoperates,theindicationLEDonthekeylightsup.
ThefunctionsthatcanbeassignedtothePresetFunctionbuttonsfromF1toF7areasfollows.
メニューのUSERASSIGNの設定でF1〜F7に割り当てられているファンクションの実行をON/OFFします。
ONのとき表示LEDが点灯します。F1〜F7に割り当てられるファンクションの項目は次の通りです。
SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
GAMMA1.0
GAMMA1.8
GAMMA2.0
GAMMA2.2
GAMMA2.4
GAMMA2.6
WHITEBALD65
WHITEBALD93
MONO
COLORCHANNEL
SCAN
ASPECT
ZOOM
HVDELAY
MARKER
USERMARKER
AUDIOMETER
AUDIOPEAKLOG
AUDIOMONITOR
AUDIOSPECTRUM
AUDIOPRESET1
AUDIOPRESET2
AUDIOPRESET3
AUDIOPRESET4
AUDIOPRESET5
AUDIOPRESET6
AUDIOPRESET7
AUDIOPRESET8
AUDIOMUTE
LAYOUTWFM
LAYOUTWAV
LAYOUTVS
LAYOUTALM16
LAYOUTQUAD
LAYOUTQUAD2
WAVEFORMMON
VECTORSCOPE
ClipGuide
TIMECODE
HISTOGRAM
FALSECOLORMTF
FALSECOLORTG
3DREVIEW
ANAGLYPH
FANSTOP
HIDEALLUTIL
LED
＜PresetFunctionitem＞
入力SDI1
SDI2
コンポジット
Y-C
コンポーネント
DVI-D
DVI-A
HD15
ガンマ1.0
1.8
2.0
2.2
2.4
2.6
ホワイトバランスD65
ホワイトバランスD93
モノ
カラーチャンネル
スキャン
アスペクト
ズーム
HVディレイ
マーカー
ユーザーマーカー
オーディオメーター
オーディオピークログ
オーディオモニター
オーディオスペクトラム
オーディオプリセット1
オーディオプリセット2
オーディオプリセット3
オーディオプリセット4
オーディオプリセット5
オーディオプリセット6
オーディオプリセット7
オーディオプリセット8
オーディオミュート
レイアウトウェーブフォーム
W/V/AUDIOLEVEL16CH
ベクトルスコープ
AUDIOLEVEL16CH/PHASE/LOG
全ユーティリティーAUDIOLEVEL8CH
全ユーティリティーAUDIOLEVEL6CH
ウェーブフォーム
ベクトルスコープ
クリップガイド(ゼブラ)
タイムコード
ヒストグラム
FALSECOLORMTF
FALSECOLORTG
3Dレビュー
アナグリフ
ファン一時停止
ユーティリティー消し
＜メニュー項目＞
USERASSIGNPresetFunctions
MFGDEFAULTSetting
F1［SDI1］
F2［SDI2］
F3［SCAN］
F4［ASPECT］
F5［MARKER］
F6［ZOOM］
F7［WAVEFORMMON］
プリセットファンクションデフォルト設定
HDM-2400W
NamesandFunctionsofParts

6
フロントパネル
Frontpanel
メニューで選択したHD-SDIエンベデッドオーディオ信号を出力します。オーディオ出力のCH選択、ボリューム調整等、
はメニューで行います。
HEADPHONEconnector(φ3.5stereojack)
UsedtomonitortheHD-SDIembeddedaudiosignalsselectedontheMENU.
Theaudiooutputchannelselection,thevolumeleveladjustment,etc.operateintheMENU.
メニューで選択したHD-SDIエンベデッドオーディオ信号をモニターします。出力のCH選択、ボリューム調整はフロントパネル
のツマミで行います。
MONITORSPEAKER(stereo)
UsedtomonitortheHD-SDIembeddedaudiosignalsselectedontheMENU.
Theaudiooutputchannelselection,thevolumeleveladjustment,etc.operateintheMENU.
ThevolumelevelandbalancecanbeadjustedbySPEAKERVOLUMEandBALANCEcontrolknobs.
モニタースピーカーのボリューム調整、バランス調整を行います。また、ミュートできます。
SPEAKERVOLUMEandBALANCEcontrolknobsandMUTEswitch
Usedtoadjustthevolumelevelandbalanceofthespeakerandtomute.
BRIGHT,CONTRAST,CHROMAandSHARPNESSlevelcontrolsandselectswitches
/LEDIndicators
このツマミを押すとユーザー設定と標準設定(デフォルト)とが切替えできます。
ユーザー設定のときLED表示が点灯します。それぞれツマミを回して調節します。O〜100の範囲で調節できます。
LEDが消灯しているときは、STANDARD(デフォルト標準値)に設定されます。
PressingtheknobselectstheUSERsettingorSTANDARD(default)setting.
WhenUSERsettingisselected(LEDindicatorlightson),rotatingtheknobadjustseachofthe
BRIGHT,CONTRAST,CHROMAandSHARPNESS.
WhentheSTANDARDsettingisselected(LEDlightsoff),theeachvalueissettothefactorysetting.
(2)Rotatingknobadjustseachvalue.ツマミを回すとそれぞれ調節できます。
(1)PressingknobselectsUSERsettingandLEDlightson.ツマミを押すとLEDが点灯します。
LED
BRIGHT
CONTRAST
CHROMA
SHARPNESS
＜STANDARDvalue＞50805050
デフォルト設定明るさコントラスト彩度シャープネス
Itisabletoadjustthevalueonthemenu,too.
メニューでも設定できます。
PICTURE
ピクチャー
RETURN
BRIGHT［50］
CONTRAST［80］
CHROMA［50］
SHARPNESS［50］
GAMMA［2.2］
RESETTODEFAULT>
0/------/80/--/100
0/----/50/----/100
0/----/50/----/100
0/----/50/----/100
1.0/---/2.2/---/3.0
※
※SHARPNESSisdisplayedonlywhentheSDIsignalisinput.
HDM-2400W
NamesandFunctionsofParts

7
リアパネル
Rearpanel
SDI(3G/HD/SD)IN1/2connectors(BNCtype)
SDI(3G/HD/SD)OUTconnector(BNCtype)
UsedtoinputtheSDI(3G/HD/SD)signal.SelectaninputsignalontheMENUorbyFunctionbutton.
HD/SD-SDI信号を入力します。入力信号の選択は、メニューまたはユーザープリセットファンクションボタンで行います。
UsedtooutputSDI(3G/HD/SD)signalinputtotheSDI(3G/HD/SD)IN1/2connector.(Loop-through)
SDI(3G/HD/SD)IN1/2コネクタに入力され、選択されて画面に表示されているSDI信号を出力します。(ループスルー)
ANALOGY(CVBS)/PB(C)/PRconnectors(BNC)
Inputtheanalogvideosignal.SettheINPUTontheMENUtotheappropriatepositionaccordingto
thesignalinputtotheANALOGY(CVBS)/PB(C)/PRconnectors.
AndtheinputsignalsettingfunctioncanbeassignedtotheF1toF7functionbuttons.
アナログビデオ信号を入力します。入力するビデオ信号に合わせてメニューでセットします。入力信号の切り替えをファンクション
ボタンF1〜F7に割り当てることができます。
CompositesignalY(CVBS)CVBS
Y-CsignalY(CVBS)-PB(C)Y-C
HDcomponentsignalY(CVBS)-PB(C)-PRCOMP
InputsignalInputconnectorINPUTselection
HD15connector(HDD-sub15-pin)
InputtheanalogHDcomponentsignals.
アナログHDコンポーネントビデオ信号を入力します。
DVI-Iconnector(DVI-I)
HD15
DVI-I
InputtheDVIsignal,digitaloranalog.
デジタルまたはアナログDVIビデオ信号を入力します。
HDM-2400W
NamesandFunctionsofParts

8
リアパネル
Rearpanel
PARALLELREMOTEconnector(8-pin,RJ-45)
Usedfortheremotecontrol:
e.g.forinputoftheTALLYsignal,INPUTsignalselectionand
PresetFunctionoperationasfolloeingitems.
Thepinassign,defaultsettingisasthetableshows.
Thecontrolsignalistoshort-circuiteachpinwithPIN5.
リモートコントロール-例えば,タリー信号入力,入力切替え,プリセットファンクションのON/OFF等に使用します。
ピンアサインはデフォルトでは表のようになっています。
コントロール信号は各ピンと5番ピンとのショートです。
PIN1［RTALLY］
PIN2［GTALLY］
PIN3［BTALLY］
PIN4［MARKER］
PIN5［GROUND］
PIN6［SDI1］
PIN7［SDI2］
PIN8［ASPECT］
PinAssign
(ManufacturingDefault)
PIN1［レッドタリー］
PIN2［グリーンタリー］
PIN3［ブルータリー］
PIN4［マーカー］
PIN5［GROUND］
PIN6［SDI1］
PIN7［SDI2］
PIN8［アスペクト比］
ピンアサイン
RTALLY
GTALLY
BTALLY
LEFTRTLY
LEFTGTLY
LEFTBTLY
RIGHTRTLY
RIGHTGTLY
RIGHTBTLY
SDI1
SDI2
CVBS
Y-C
COMP
GAMMA1.0
GAMMA1.8
GAMMA2.0
GAMMA2.2
GAMMA2.4
GAMMA2.6
GAMMA2.35
WHITEBALD65
WHITEBALD93
MONO
SCAN
ASPECT
ZOOM
HVDELAY
REDONLY
BLUEONLY
GREENONLY
MARKER
USERMARKER
AUDIOMETER
AUDIOPEAKLOG
AUDIOMONITOR
AUDIOPRESET1
AUDIOPRESET2
AUDIOPRESET3
AUDIOPRESET4
AUDIOPRESET5
AUDIOPRESET6
AUDIOPRESET7
AUDIOPRESET8
AUDIOMUTE
LAYOUTDECK
LAYOUTQUAD
WAVEFORMMON
VECTORSCOPE
ClipGuide
TIMECODELTC
TIMECODEVITC1
TIMECODEVITC2
HISTOGRAM
FALSECOLORTG
FALSECOLORMTF
3DLEFTEYE
3DRIGHTEYE
3DBLENDING
3DLUMADIFF
3DCHROMADIFF
GLYPHCOLOR
GLYPH1/2COLOR
GLYPHOPTIMIZED
GLYPHGRAY
Assignablefunctionitems
HDM-2400W
NamesandFunctionsofParts

Fan
Fanworkswhenthepowerswitchisturnedon.
ThefanoperationcanbesettoAUTO,MAXorOFF,ontheMENU,SETUP,FANCONTROL.
AndFANSTOPfunctioncanbeassignedtothefunctionbutton,F1toF7onthefrontpanel.
ファンはPOWERスイッチONのとき動作します。ファンの動作は、AUTO/MAX/OFFにメニューで設定できます。
FANSTOP機能がフロントパネルのファンクションボタンにユーザー設定できます。
9
リアパネル
Rearpanel
DCIN24V(DC24Vpowersupplyinput)connector(XLR4-pin)
UsedforconnectiontotheACadaptor(24VDCpowersupply).
ACアダプタ(DC24V電源）を接続します。DC24V専用です。
ACIN(AC100Vinput)connectorandACINswitch
UsedforconnectiontotheACoutlet.
AC100V電源に接続します。AC電源をON/OFFします。
POWERswitch電源スイッチ
Turnonthepowersupply.
Whenthepowerissupplied,theSTANBYindicatorLEDonthefrontpanellightsontoRED(STANDBY)
orGREEN.
電源スイッチをONすると、フロントパネルのSTANDBY表示LEDが赤(STANDBY状態)または緑(画面表示状態)に点灯します。
AUDIOOUTconnector(Unbalancedstereooutput)(φ3.5stereojack)
UsedtooutputtheHD-SDIembeddedaudiosignalsselectedontheMENU.
TheaudiooutputchannelselectionoperatesintheMENU.
メニューで選択したHD-SDIエンベデッドオーディオ信号を出力します。出力のCH選択はメニューで行います。
AUDIOINconnector(φ3.5stereojack)
Usedtoinputtheexternalaudiosignalstomonitor.
外部のオーディオ信号を入力します。
HDM-2400W
NamesandFunctionsofParts
Handle
Usedforcarrying.
持ち運び用取っ手。
Locationstand
Thedisplayangleofthescreencanbechanged.
スタンドは、画面の角度を変えることができます。

10
［1］MENUOperation
MENU:PresstheMENUbutton
Press,andtheMENUisdisplayedonthescreen.
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
MODELPMD-2400
INPUTSDI1
FORMAT1080i/59.94
COLORMATRIX709
COLORTEMPD65
3DREVIEWOFF
ANAGLYPHOFF
AUDIOPEAKLOGOFF
AUDIOPHASEMONOFF
SDIERRORCOUNT0
SDILEVELHD
UNKNOWNUNKNOWN
VERSION1.8
thevideoformat
oftheinputsignal
メニューの操作について
＜MENUItem＞メニュー項目
＜MENUSettingItem＞設定項目 ＜SettingValue＞設定値
RETURN
COLORMATRIX［709］
COLORTEMP［D65］
REDBIAS［0］
GREENBIAS［0］
BLUEBIAS［0］
REDGAIN［1.00］
GREENGAIN［1.00］
BLUEGAIN［1.00］
AUTO
RGB
BT.601
BT.709
入力信号のビデオフォーマット
が表示されます。
無信号のときは”NOSYNC”
［confirm］
MENUItemSlection:RotatetheENTERknob.
Rotatetomovethecursortothedesiredsettingitem.
MENUSetting:PresstheMENUbutton.
Presstoconfirmtheselecteditemorsettingvalue.
RETURN:PresstheRETURN(MENU)button.
WhentheLEDontheMENUbuttonlightson,
press,andthecursorreturnsandtheMENUdisappears.
MENUの表示:MENUボタンを押すとメニューが画面に表示されます。
項目の選択:MENUを回して設定したい項目にアクセスします。
設定:MENUボタンを押すとその項目、設定が確定されます。
設定項目で押すと、その項目の設定（設定値）が表示されます。
設定（設定値）で押すと、その設定（設定値）が確定（入力）され、
カーソルが左（設定項目）へもどります。
リターン:LED点灯時、RETURN(MENU)ボタンを押すとカーソルがもどります。
Press
INFO［1080i/60］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
＜MENUItem＞メニュー項目
Whennosignalisinput,
“NOSYNC”isdisplayed.
(Press,andtheMENUisdisplayedonthescreen)
入力SDI信号の種類
SD/HD/3G
FALSECOLORMTF
FALSECOLORTG
CIED65
JPD93
USER
CALD65/D93
CALD65
CALD93
inputsignal
MENUbutton ENTERknob-button
LED
Rotate
Rotate
Rotate
Rotate
Rotate
Press
Press
Press
HDM-2400W
NamesandFunctionsofParts

11
RETURN
INPUT［SDI1］
ANALOGCALIBRATE>
SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
RETURN
COLORMATRIX［709］
COLORTEMP［D65］
REDBIAS［0］
GREENBIAS［0］
BLUEBIAS［0］
REDGAIN［1.00］
GREENGAIN［1.00］
BLUEGAIN［1.00］
INPUT
0.500/-----1.992
FALSECOLORMTF
FALSECOLORTG
CIED65
JPD93
USER
CALD65/D93
CALD65
CALD93
AUTO
RGB
BT.601
BT.709
PICTURE
COLOR
＜MENUItem＞メニュー項目 ＜MENUSettingItem＞設定項目 ＜SettingValue＞設定値
-128/-----/127
-128/-----/127
-128/-----/127
0.500/-----1.992
0.500/-----1.992
［2］MENUContents メニューの内容(項目および設定値)について
入力
ピクチャー
色
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
Displaysthevideoformat
oftheinputsignal.
入力信号のビデオフォーマット
が表示されます。
無信号のときは”NOSYNC”
Whennosignalisinput,
“NOSYNC”isdisplayed.
3G/HD/SD入力SDI信号の種類
INFOMATION インフォメーション
inputsignalselected
MODELPMD-2400
INPUTSDI1
FORMAT1080i/59.94
COLORMATRIX709
COLORTEMPD65
3DREVIEWOFF
ANAGLYPHOFF
AUDIOPEAKLOGOFF
AUDIOPHASEMONOFF
SDIERRORCOUNT0
SDILEVELHD
UNKNOWNUNKNOWN
VERSION1.8
RETURN
BRIGHT［50］
CONTRAST［80］
CHROMA［50］
SHARPNESS［50］
GAMMA［2.20］
RESETTODEFAULT>
0/------/80/--/100
0/----/50/----/100
0/----/50/----/100
0/----/50/----/100
1.0/---/2.2/---/3.0
※
※SHARPNESSisdisplayedonlywhentheSDIsignalisinput.
HDM-2400W
NamesandFunctionsofParts

12
SCREEN
RETURN
SCAN［NORMAL］
ASPECT［16:9］
MONO/COLOR［RGB］
HVDELAY［OFF］
SHIFTH［0］
SHIFTV［0］
3DREVIEW［OFF］
ANAGLYPH［OFF］
NORMAL
OVERSCAN
ZOOM
AUTO
4:3
16:9
PAYLOAD
RGB
MONO
RED
GREEN
BLUE
ON/OFF
-128/-----/127
-128/-----/127
画面
OFF
LEFTEYE
RIGHTEYE
BLENDING
LUMINANCEDIFF.
CHROMADIFF.
OFF
COLOR
HALFCOLOR
OPTIMIZED
GRAY
MARKER
RETURN
MARKER［OFF］
CENTER［ON］
ASPECT［OFF］
SAFTY［95%］
CROSSHATCH［OFF］
MARKERMAT［CLEAR］
LINETHICKNESS［2］
LINETYPE［WHITE］
ON/OFF
ON/OFF
OFF
4:3
16:9
1.85:1
2.35:1
4:3&1.85
4:3&2.35
80%/---/99%/OFF/USER
CLEAR
HALFTONE
BLACK
1/2/3
GRAY
HALFTONE
WHITE
INVERT
マーカー
OFF
SMALL
MEDIUM
LARGE
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
3DREVIEW
ANAGLYPH
3Dレビュー
アナグリフ
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
HDM-2400W
NamesandFunctionsofParts

13
AUDIO
RETURN
FRONTVOLUME［15］
HEADROOMSTART［-20dB］
HEADROOMEND［-6dB］
LEFTCHANNEL［1CH］
RIGHTCHANNEL［2CH］
LOADCHPRESETFROM＞
SAVECHPRESETTO＞
CHPRESET［UNLOCKED］
-60dB/---- ----/0dB
PRESET1/---/8
LOCK/UNLOCK
CHANNEL1/-----/16
CHANNEL1/-----/16
PRESET1/---/8
0/-----/40
オーディオ
1/-----/16
RETURN
LEVELMETER［ON］
BACKGROUND［ON］
DECAY［FAST］
DISPLAYCHANNELS［8］
DISPFILTER［ALL］
COLUMNS［DUAL］
DISPTYPE［OVERLAP］
AUDIOPEAKLOG［OFF］
LOGSPEED［4S］
SIZE［SMALL］
POSITION［LEFTBOT］
AUDIOPHASEMON［OFF］
DISPPERSISTANCY［1］
SIZE［MEDIUM］
POSITION［LEFTTOP］
DISPTYPE［OVERLAY］
AUDIOSPECTRUM［OFF］
DECAY［MEDIUM］
SIZE［SMALL］
POSITION［RIGHTTOP］
DISPTYPE［OVERLAP］
ON/OFF
ON/OFF
ACTIVE/ALL
DUAL
QUAD
VERTICAL
OVERLAP/OVERLAY
4S
8S
20S
60S
120S
300S
FAST/MEDIUM/SLOW
ON/OFF
OFF/ON1/2/4/8
SMALL/MEDIUM/LARGE
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
OVERLAY/OVERLAP
SMALL/LARGE
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
1FRAME
4FRAME
8FRAME
16FRAME
AUDIOUTIL オーディオユーティリティー
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
AUDIOLEVELMETER
AUDIOPEAKLOG
AUDIOPHASEMONITOR
オーディオレベルメーター
オーディオピークログ
オーディオフェーズモニター
SLOW/MEDIUM/FAST
SMALL/MEDIUM
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
OVERLAP/OVERLAY
ON/OFF
AUDIOSPECTRUM
オーディオスペクトラム
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
HDM-2400W
NamesandFunctionsofParts

14
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
VECTORSCOPE
ON/OFF
RETURN
LAYOUT［NORMAL］
VECTORSCOPE［ON］
SIZE［MEDIUM］
POSITION［LEFTBOT］
DISPTYPE［OVERLAY］
GAIN［1.00］
SMALL
MEDIUM
LARGE
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
OVERLAY/OVERLAP
1.00/-----/4.98
ClipGuide
RETURN
ClipGuide［OFF］
MODE［LUMA&CHROMA］
DISPTYPE［ZEBRA］
YUPPERLIMIT［103.2%］
YLOWERLIMIT［-0.9%］
CUPPERLIMIT［240］
CLOWERLIMIT［16］
LUMA(Y)
LUMA(Y)ONMONO
CHROMA(C)
CHROMA(C)ONMONO
Y&C
Y&CONMONO
ZEBRA/FILL
0/-------/255
ON/OFF
-7.3/------/109.1
-7.3/------/109.1
0/-------/255
ベクトルスコープ
クリップガイド(ゼブラ)
OFF
WHITE
PARADE
WAVEFORM
RETURN
LAYOUT［NORMAL］
WAVEFORM［ON］
SIZE［MEDIUM］
POSITION［RIGHTBOT］
DISPTYPE［OVERLAY］
YOVERLIMIT［103.2%］
YUNDERLIMIT［-0.9%］
HISTOGRAM［OFF］
POSITION［RIGHTBOT］
NORMAL
DECK
QUAD
SMALL
MEDIUM
LARGE
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
OVERLAY/OVERLAP
-7.3/-------/109.1
-7.3/-------/109.1
ウェーブフォーム
ON/OFF
LEFTTOP
LEFTBOT
RIGHTTOP
RIGHTBOT
NORMAL
WFM
WAV
VS
ALM16
QUAD
QUAD2
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
HDM-2400W
NamesandFunctionsofParts

15
USERASSIGN
RETURN
F1［SDI1］
F2［SDI2］
F3［SCAN］
F4［ASPECT］
F5［MARKER］
F6［ZOOM］
F7［WAVEFORMMON］
ユーザーアサイン
(プリセットファンクション) SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
GAMMA1.0
GAMMA1.8
GAMMA2.0
GAMMA2.2
GAMMA2.4
GAMMA2.6
GAMMA2.35
WHITEBALD65
WHITEBALD93
MONO
COLORCHANNEL
SCAN
ASPECT
ZOOM
HVDELAY
MARKER
USERMARKER
AUDIOMETER
AUDIOPEAKLOG
AUDIOPHASEMON
AUDIOSPECTRUM
AUDIOPRESET1
AUDIOPRESET2
AUDIOPRESET3
AUDIOPRESET4
AUDIOPRESET5
AUDIOPRESET6
AUDIOPRESET7
AUDIOPRESET8
AUDIOMUTE
LAYOUTDECK
LAYOUTQUAD
WAVEFORMMON
VECTORSCOPE
ClipGuide
TIMECODE
HISTOGRAM
FALSECOLORTG
FALSECOLORMTF
3DREVIEW
ANAGLYPH
FANSTOP
HIDEALLUTIL
3DLEFTEYE
3DRIGHTEYE
3DBLENDING
3DLUMADIFF
3DCHROMADIFF
GLYPHCOLOR
GLYPH1/2COLOR
GLYPHOPTIMIZED
GLYPHGRAY
FunctionButtonsF1toF7
PresetFunction
(ManufacturingDefault)
＜Assignablefunctionitem＞
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
HDM-2400W
NamesandFunctionsofParts

16
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
REMOTE
RETURN
PIN1［RTALLY］
PIN2［GTALLY］
PIN3［BTALLY］
PIN4［MARKER］
PIN5［GROUND］
PIN6［SDI1］
PIN7［SDI2］
PIN8［ASPECT］
リモート
PARALLELREMOTEconnector
PinAssign
(ManufacturingDefault)
＜Assignablefunctionitem＞
RTALLY
GTALLY
BTALLY
LEFTRTLY
LEFTGTLY
LEFTBTLY
RIGHTRTLY
RIGHTGTLY
RIGHTBTLY
POWERSAVE
SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
GAMMA1.0
GAMMA1.8
GAMMA2.0
GAMMA2.2
GAMMA2.4
GAMMA2.6
GAMMA2.35
WHITEBALD65
WHITEBALD93
MONO
SCAN
ASPECT
ZOOM
HVDELAY
REDONLY
BLUEONLY
GREENONLY
MARKER
USERMARKER
AUDIOMETER
AUDIOPEAKLOG
AUDIOPHASEMON
AUDIOSPECTRUM
AUDIOPRESET1
AUDIOPRESET2
AUDIOPRESET3
AUDIOPRESET4
AUDIOPRESET5
AUDIOPRESET6
AUDIOPRESET7
AUDIOPRESET8
AUDIOMUTE
LAYOUTDECK
LAYOUTQUAD
WAVEFORMMON
VECTORSCOPE
ClipGuide
TIMECODELTC
TIMECODEVITC1
TIMECODEVITC2
HISTOGRAM
FALSECOLORTG
FALSECOLORMTF
3DLEFTEYE
3DRIGHTEYE
3DBLENDING
3DLUMADIFF
3DCHROMADIFF
GLYPHCOLOR
GLYPH1/2COLOR
GLYPHOPTIMIZED
GLYPHGRAY
HIDEALLUTIL
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
HDM-2400W
NamesandFunctionsofParts

17
＜MENUItem＞ ＜MENUSettingItem＞ ＜SettingValue＞
SETUP
RETURN
FORMATDISPLAY［AUTO］
TIMECODE［OFF］
SIZE［SMALL］
POSITION［BOTTOM］
USERBIT［OFF］
POWERSAVE［ALWAYSON］
KEYLOCK［UNLOCKED］
PICTUREDELAY［FAST］
BACKLIGHT［50%］
RESETTOMFGDEFAULT＞
BACKUPUSERCONFIG＞
RESTOREUSERCONFIG＞
FANCONTROL［AUTO］
AUTO
ON
OFF
OFF
LTC
VITC1
VITC2
ALWAYSON
2MIN
5MIN
10MIN
30MIN
1HOUR
2HOUR
RESETNOW/CONFIRM
BACKUPNOW/CONFIRM
RESTORENOW/CONFIRM
セットアップ
UNLOCK/LOCK
AUTO
MAX
OFF
SDISTATUS
RETURN
ERRORCOUNT0
RESETCOUNTER
DISPLAY［OFF］
OFF
ON
AUTO
SDIステータス
NOMAL
FAST
FASTEST
MIN(25)/-----/100%
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［OFF］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［ON］
ClipGuide［OFF］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
ユーザー設定のリセット
USERSettingRESET
Accessto“RESETTOMFGDEFAULT＞”ontheMENU/SubmenuandrotateandpresstheMENU
buttontoresetthefunctionsandsettingstothedefaultsettings.
MENUボタンでRESETTOMFGDEFAULT＞にアクセスしてファンクション、設定値を工場出荷時のデフォルト設定値に
リセットします。
RESETTOMFGDEFAULT＞ CANCEL
SETUP
RESETNOW
CONFIRM
CANCEL
Menulist Submenulist
MENUends.
HDM-2400W
NamesandFunctionsofParts
SMALL/LARGE
TOP/BOTTOM
ON/OFF

Connection接続方法
18
電源の接続方法
PowerSupplyConnection
MakesuretoturnoffthePOWERswitchesofeachunitbeforeconnecting.
1
ConnecttheACINconnectorontherearpaneltoACoutletwiththeACcord.
OrconnecttheDCINconnector(XLR4-pin)ontherearpaneltoACAdaptor(DCpowersupply).
リアパネルのACINコネクタをAC電源に接続します。または、リアパネルのDCINコネクタにACアダプタを接続します。
WhenthePOWERswitchisturnedonandthepowerissupplied,theSTANBYIndicatorLEDonthefront
panellightsuptogreen(displayon)ortored(displayoff,stanby)andthefansontherearpanelturn.
2
電源スイッチがONされ、電源が供給されるとフロントパネルのスタンバイ表示LEDが点灯し、リアパネルのファンが回転します。
注意:機器を接続する前には、電源スイッチは必ずOFFしてください。
HDM-2400W
Connection
電源スイッチ
POWERswitch
ACINconnector
ACINswitch
AC電源スイッチ
AC電源入力コネクタ
ACcord
ACコード
STANDSBYswitch
STANDBYIndicationLED
スタンバイ表示LED
スタンバイSW
緑:動作状態
赤:スタンバイ

19
HD-SDI信号入力および出力
HD-SDISignalInput&Output
1
ConnecttheSDI(3G/HD/SD)IN1/IN2connector(BNCtype)ontherearpaneltotheSDIoutputconnector
ofacameraorVTR,etc.
リアパネルのSDI(3G/HD/SD)IN1/2入力コネクタへカメラ等のSDIoutputから接続します。
2
BypressingMENUbuttondisplaytheMENUandaccesstoINPUTandsetto“SDI1”or“SDI2”.
“SDI1”or“SDI2”anditsvideoformataredisplayedintheMENU(INFO,INPUTandFORMAT).
ThentheselectedinputsignalcanbeoutputtotheSDI(HD/SD)connector(;Loopthrough).
TheINPUTselectioncanbeassighnedtoUSERPresetsbuttons,F1-F7.
フロントパネルのMENUボタン中央を押してメニュー画面を表示し、“INPUT”→”INPUT”→”SDI1(or2)”とアクセスして,
SDI入力を設定します。INFO(インフォメーション)に入力信号、ビデオフォーマットが表示されます。
またこのとき、選択された入力信号はSDI(3G/HD/SD)OUTコネクタから出力することができます。
入力選択は、ユーザーアサインプリセットボタンF1〜F7に割り当てることができます。
Videoformat
入力信号のフォーマット
RETURN
INPUT［SDI1］
ANALOGCALIBRATE＞
SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
Inputsignal入力信号
INFO［1080i/59.94］
INPUT［SDI1］
PICTURE
COLOR［D65/709］
SCREEN［16:9］
MARKER［ON］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［OFF］
ClipGuide［ON］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
MODELPMD-2400
INPUTSDI1
VIDEOFORMAT1080i/59.94
COLORMATRIX709
COLORTEMPD65

SDILEVELHD
3G/HD/SD入力信号の種類
HDM-2400W
Connection
SDI(3G/HD/SD)
IN1
IN2
OUT
fromCamera
orVTR,etc.
SDIoutput
MENUbutton
MENUボタン

20
アナログビデオ信号入力
AnalogVideoSignalInput
1
ConnecttheANALOGconnectors,Y(CVBS),PB(C)andPR,ontherearpaneltotheanalogvideosignalsource.
リアパネルのANALOGコネクタ,Y(CVBS),PB(C),PRにHDコンポーネント等のアナログビデオ信号を接続します。
2
BypressingMENUbuttondisplaytheMENUandaccesstoINPUTandsetto“CVBS”,“Y-C”or“COMP”.
TheinputsignalanditsvideoformataredisplayedintheMENU(INFO,INPUTandFORMAT).
TheINPUTselectioncanbeassignedtoUSERPresetsbuttons,F1-F7.
フロントパネルのMENUボタン中央を押してメニュー画面を表示し、“INPUT”→”INPUT”→とアクセスして,CVBS,Y-Cまたは
COMP入力に設定します。INFO(インフォメーション)に入力信号、ビデオフォーマットが表示されます。
入力選択は、ユーザーアサインプリセットボタンF1〜F7に割り当てることができます。
Videoformat
入力信号のフォーマット
RETURN
INPUT［CVBS］
SETUPLEVEL［0］
ANALOGCALIBRATE＞
SDI1
SDI2
CVBS
Y-C
COMP
DVI-D
DVI-A
HD15
Inputsignal入力信号
INFO［480i/60］
INPUT［CVBS］
PICTURE
COLOR［D65/RGB］
SCREEN［16:9］
MARKER［ON］
AUDIO［15］
AUDIOUTIL
WAVEFORM［ON］
VECTORSCOPE［OFF］
ClipGuide［ON］
USERASSIGN
REMOTE
SDISTATUS［OFF］
SETUP
MODELPMD-2400
INPUTCVBS
VIDEOFORMAT480i/60
COLORMATRIXRGB
COLORTEMPD65
MENUbutton
CompositesignalY(CVBS)CVBS
Y-CsignalY(CVBS)-PB(C)Y-C
HDcomponentsignalY(CVBS)-PB(C)-PRCOMP
Inputsignal入力InputconnectorコネクタINPUTselection入力切替
HDM-2400W
Connection
Y(CVBS)
PB(C)
PRAnalogvideosignal
HD15
Analogvideosignal
アナログコンポーネント