Protection One 250P1 User manual

K4333 9/99
3
6HFXULW\6\VWHP
8VHU*XLGH
123
654
897
0
*
#
OFF AWAY STAY
MAX TEST BYPASS
INSTANT CODE CHIME
READY
ARMED
READY
123
654
897
0
*#
OFF AWAY S TAY
MAX TEST BYPASS
INSTANT CODE CHIME
READY
ARMED
READY
ALARM
FIRE
AWAY
BYPASS
STAY
CHECK INSTANT
NOAC
NOT READY
CHIME
BAT
NIGHT
PHONE TEST
CANCELED

- 2 -

- 3 -
TABLE OF CONTENTS
System Overview.......................................5
General Information.................................5
Zones.......................................................5
Burglary Protection..................................5
Security Codes........................................6
Fire Protection.........................................6
Paging Feature........................................6
Alarms .....................................................7
Phone Access & Voice Response
Capability.................................................7
Entry/Exit Delays....................................... 8
General Information.................................8
Exit Alarms ..............................................9
About the Keypads..................................10
General Information...............................10
Two-Line Alpha Keypad ........................10
Fixed-Word Keypad...............................10
Fixed-Word Keypads.............................11
Displays.................................................11
What the Displays mean:.......................11
Functions of the Keypads ......................13
Checking for Open Zones....................... 16
Using the ✱Key...............................16
Arming Perimeter Only (with Entry Delay)17
Using the 3 Key.............................17
Arming Perimeter and Selected Interior
Zones (with Entry Delay) ....................18
Using the 3 Key to Arm Night-Stay 18
Arming Perimeter Only (with No Entry
Delay).................................................... 19
Using the 7 Key.............................19
Arming All Protection (with Entry Delay)20
Using the 2 Key.............................20
Arming All Protection (Without Entry
Delay).................................................... 21
Using the 4 Key..............................21
Disarming and Silencing Alarms ...........22
Using the 1 Key ...............................22
Memory of Alarm ...................................23
Bypassing Protection Zones..................24
Using the 6 Key ..............................24
Quick Bypass.........................................25
Displaying Bypassed Zones ..................25
Chime Mode .............................................26
Using the 9 Key ................................26
Function Keys..........................................27
Using the A B C D Keys....27
Panic Keys................................................28
Using Panic Keys...................................28
Types of Panic Alarms...........................28
Macro Key Programming........................29
How to use a Macro Key (Speedkey)....29
What to include in a Macro program:.....29
Using Device Commands .......................30
General Information...............................30
To Activate Devices...............................30
To Deactivate Devices...........................30
Paging Feature.........................................31
General Information...............................31
Code Format..........................................31
Examples...............................................31
Security Codes.........................................32
General Information...............................32
Temporary Code....................................32
Duress Code..........................................32
Quick Arming.........................................33
To Add a User or Change
a User's Code........................................33
To Delete a User....................................34
Testing the System..................................35
Using the 5 Key ..............................35
Trouble Conditions..................................37
Typical Check Displays .........................37

TABLE OF CONTENTS (cont'd)
- 4 -
Fire Alarm System...................................40
General Information...............................40
In Case of Fire.......................................40
Recommendations for Proper Protection42
Recommendations for Smoke and Heat
Detectors...............................................42
Recommendations for Proper Intrusion
Protection ..............................................44
Emergency Evacuation........................... 45
Maintaining Your System........................46
Taking Care of Your System..................46
Replacing Batteries in
Wireless Sensors...................................46
Routine Care..........................................47
Quick Guide to System Functions.........48
Summary of Audible Notification...........49
Glossary ...................................................50

- 5 -
System Overview
General Information
Congratulations on your ownership of a PROTECTION ONE Security
System. You've made a wise decision in choosing this system because
it represents the latest in security protection technology available
today. PROTECTION ONE is one of the world's largest
manufacturers of security systems, and millions of premises are
protected by PROTECTION ONE.
The 250P1 offers you three forms of protection: burglary, fire, and
emergency. Your system consists of at least one keypad, which
provides control of system operation. The system includes various
sensors that provide perimeter and interior burglary protection, plus
smoke or combustion detectors designed to provide early warning in
case of fire.
The 250P1 uses microcomputer technology to monitor all protection
zones and system status, display appropriate information on the
keypad(s) used with the system, and initiate appropriate alarms.
Your system may also have been programmed to automatically send
alarm or status messages over the phone lines to a central alarm
monitoring station.
Zones Your system's sensing devices have been assigned to various "zones."
For example, the sensing device on your entry/exit door may have
been assigned to zone 01, sensing devices on windows in the master
bedroom to zone 02, and so on. These numbers will appear on the
display, along with a description for that zone (if programmed in 2-
line alpha display keypads), when an alarm or trouble condition
occurs.
Burglary Protection
Your 250P1 provides five modes of burglary protection: STAY,
NIGHT-STAY, INSTANT, AWAY, and MAXIMUM, and allows you to
bypass selected zones while leaving the rest of the system armed. You
must turn on (arm) the burglary protection portion of your system
before it will sense burglary alarms.

- 6 -
System Overview (cont'd)
The system also provides a CHIME mode, for alerting users to the
opening of protected doors and windows while the system is disarmed.
Refer to the other sections of this manual for procedures for using these
features.
The following table lists the five different arming modes and the features
of each.
FEATURES OF EACH ARMING MODE
ARMING MODE Exit
Delay Entry Delay Perimeter Armed Interior Armed
STAY
Yes
Yes
Yes
No
NIGHT-STAY
Yes
Yes
Yes
Yes*
INSTANT
Yes
No
Yes
No
AWAY
Yes
Yes
Yes
Yes
MAXIMUM
Yes
No
Yes
Yes
*for selected interior zones (ask your installer about the included zones)
Security Codes
At the time of installation, you were assigned a personal four-digit
security code, known only to you. You must enter the security code when
arming and disarming the system, and when performing other system
functions. As an additional safety feature, other users who do not need to
know your code can be assigned different security codes. Refer to the
Security Codes section for procedures on adding security codes to the
system.
Fire Protection
The fire protection portion of your security system (if used) is always
active and will sound an alarm if a fire condition is detected. Refer to the
Fire Alarm System section for important information concerning fire
protection, smoke detectors, and planning emergency exit routes from the
premises.
Paging Feature
If the paging feature has been programmed for your system, your pager
will respond to certain conditions as they occur in your system. Your
pager will display code numbers indicating the type of condition that has
occurred. Refer to the Paging Feature section for more detailed
information.

- 7 -
System Overview (cont'd)
Alarms
When an alarm occurs, both the keypad and external sounders will
sound, and the keypad will display the zone(s) causing the alarm. If your
system is connected to a central monitoring station, an alarm message
will also be sent. To stop the alarm sounding, simply disarm the system.
Cross Zoning
Cross zoning is used to prevent false alarms. Up to 10 zones can be linked
together in your security system (programmed by the installer). If any of
the 10 linked zones faults in the armed state, the system will wait to see
if a second zone faults within a programmed period of time. When the
second zone faults, alarms will be sent out for both zones (if program-
med), the alarm bell will sound, and the two zones in alarm will be
displayed on the keypad.
However, if another fault does NOT occur within the programmed period
of time, only a Trouble report will be sent to the monitoring station and
no message will be displayed on the keypad until the system is disarmed.
Memory of Alarm
When an alarm condition occurs, the keypad displays the number(s) of
the zone(s) that caused the problem, and displays the type of alarm (e.g.,
FIRE, ALARM). It remains displayed until it is cleared by disarming the
system (see the Disarming and Silencing Alarms section).
Phone Access & Voice Response Capability
Your system may include a voice module that permits you to access the
system via a TouchTone phone, either on-premises or by call-in when
away. The phone access feature will enable you to do the following:
•Receive synthesized voice messages over the telephone regarding the
status of the security system.
•Arm and disarm the system and perform most function commands via
the telephone, with voice confirmation provided after each command
entry.

- 8 -
Entry/Exit Delays
General Information
The 250P1 has preset time delays, known as exit delay and entry
delay. Whenever you arm your system, exit delay gives you time to
leave through the designated exit door without setting off an alarm.
Exit delay begins immediately after entering any arming command,
and applies to all modes of arming protection. If it is programmed, a
slow beeping will sound throughout the exit delay period; with fast
beeps during the last 10 seconds.
Entry Delay gives you time to disarm the system when you re-enter
through the designated entrance door. But you must disarm the
system before the entry delay period ends, or an alarm will occur. The
keypad beeps during the entry delay period, reminding you to disarm
the system. There are two entry delays (if programmed). The first is
for your primary entrance and the second can be used for a secondary
entrance, where a longer delay is required to give you enough time to
walk to the keypad to disarm the system.
You can also arm the system with no entry delay at all by using the
INSTANT arming mode when someone remains on premises, or arm
the system in the MAXIMUM arming mode when no one is expected
to be on the premises. The former mode provides greater security
while you are on the premises, or the latter, when your absence will
be extended, such as when your on vacation.
See your installer for your delay times (you may want to record them
below).
Exit delay : seconds Entry delay 1: seconds
Entry delay 2:
seconds

- 9 -
Entry/Exit Delays (cont'd)
Exit Alarms
To minimize false alarms sent to the alarm monitoring company,
your system may have been programmed for this feature. Ask
your installer if Exit Alarm is active for your system.
Exit Alarm Active
Whenever you arm the system, the exit delay begins. If an entry/exit
door or interior zone is faulted when the exit delay ends (e.g., exit
door left open), the system sounds an alarm and starts the entry delay
timer. If you disarm the system before the entry delay ends, the alarm
sound stops and the message CANCELLED ALARM or CA is
displayed on the keypad, along with a zone number indicating the
faulted zone. No message is sent to the alarm monitoring company.
To clear the exit alarm condition, the open zone must be made intact.
To clear the display, enter your 4-digit security code plus OFF key.
If you do not disarm the system before the entry delay ends, and an
entry/exit door or interior zone is still open, the alarm sound
continues and an exit alarm message is sent to the alarm monitoring
company. The message EXIT ALARM or EA is displayed on the
keypad, along with a zone number indicating the faulted zone. To stop
the alarm, the system must be disarmed (by entering your 4-digit
security code). To clear the display, enter your security code plus
OFF.
An exit alarm also results if an entry/exit door or interior zone is
faulted within 2 minutes after the end of the exit delay.

- 10 -
About the Keypads
IMPORTANT
If the keypad beeps rapidly when you enter the premises, it
means that an alarm has occurred during your absence and an
intruder may still be on the premises.
LEAVE IMMEDIATELY AND CONTACT THE POLICE from a
nearby safe location.
General Information
Your keypads allow you to control all system functions. The keypads
feature a telephone-style (digital) keypad and a Liquid Crystal
Display (LCD) that shows the nature and location of all occurrences.
The keypads contain a built-in loudspeaker (sounder) that will
annunciate during alarms and troubles. The keypads also beep during
certain system functions, such as during entry/exit delay times, in
CHIME mode, and when you depress any of the keys (to acknowledge
the key press).
There are two basic types of keypads: the fixed-word keypad and the
alpha keypad (both described below).
Two-Line Alpha Keypad
Alpha keypads feature a 2-line, 32-character alphanumeric LCD that
displays system messages and instructions. The alpha keypad
supported by this system (6160PL2) is shown on a following page.
This keypad can be programmed with custom zone descriptors, if
programmed. The screen displays depicted in this manual are
those that typically appear on this 2-line alpha keypad.
Fixed-Word Keypad
Fixed-word keypads are functionally identical to alpha keypads, but
the LCD display only uses predesignated words to identify the nature
and location of occurrences. The fixed-word keypads supported by
this 250P1 system (6150PL2 and 6150RFPL2) are shown on the next
page.

- 11 -
About the Keypads (cont'd)
Fixed-Word Keypads
ALARM
CHECK
FIRE
AWAY
STAY
INSTANT
BYPASS
NIGHT
NO AC
CHIME
BAT
CANCELED
NOT READY
123
654
897
0
*
#
OFF AWAY STAY
MAX TEST BYPASS
INSTANT CODE CHIME
READY
ARMED
READY
123
654
897
0
*
#
OFF AWAY STAY
MAX TEST BYPASS
INSTANT CODE CHIME
READY
ARMED
READY
ALARM
FIRE
AWAY
BYPASS
STAY
CHECK INSTANT
NOAC
NOT READY
CHIME
BAT
NIGHT
PHONE TEST
CANCELED
6148PL2
FIXED-WORD KEYPAD 6150PL2/6150RFPL2 FIXED-WORD KEYPAD
Displays
What the Displays mean:
AWAY: All burglary zones, interior and perimeter, are armed.
STAY: Perimeter burglary zones, such as protected windows and
doors, are armed.
NIGHT: Perimeter burglary zones such as protected windows and
& STAY doors are armed, as well as selected interior zones.
(NIGHT-STAY) (Both LCD words will be visible in this mode.)
INSTANT: Perimeter burglary zones are armed and Entry Delay is
turned off.
BYPASS: One or more burglary protection zones have been bypassed.
ALARM
FIRE
AWAY
BYPASS
STAY
CHECK INSTANT
NOAC
NOT READY
CHIME
BAT
NIGHT
PHONE TEST
CANCELED
ALARM
CHECK
FIRE
AWAY
STAY
INSTANT
BYPASS
NIGHT
NO AC
CHIME
BAT
CANCELED
NOT READY

- 12 -
About the Keypads (cont'd)
NOT READY: The burglary portion of the system is not ready for arming
(due to open protection zones).
READY: The burglary system is ready to be armed.
NO AC: AC power has been cut off. System is operating on backup
battery power.
AC: AC power is present.
CHIME: The Chime feature is activated.
BAT: There is a low-battery condition in a wireless sensor (if
zone number is displayed) or a low system battery (if no
zone number is displayed).
ALARM: An intrusion has been detected and the system is armed
(also appears during a fire alarm or audible emergency
alarm). The protection zone in alarm is also displayed.
CHECK: A malfunction has been discovered in the system (at any
time); or an open has been detected in a Fire zone (at any
time); or a fault has been detected in a Day/Night burglary
zone (during a disarmed period). The zone number in
trouble is also displayed.
FIRE: A fire alarm is present. The zone in alarm is also displayed.
CANCELED: Appears when an alarm occurs and the system is disarmed
before the monitoring station has been notified. This
message will also appear after a CANCEL report has been
received by the monitoring station when you press the A, B,
C, or D key (if available) which has been programmed to
provide this cancel option.

- 13 -
Functions of the Keypads
123
654
897
0
*#
OFF AWAY STAY
MAX TEST BYPASS
INSTANT CODE CHIME
READY
ARMED
READY
15
14
16
8 11 13
12
10
9
7
6
4
3
5 1 2
17
A
D
C
B
6160PL2
2-LINE ALPHA KEYPAD
All keypads are functionally identical to the numbered callouts shown above and described as follows.
1. DISPLAY WINDOW: Fixed-word
and 2-line Alpha Displays use
Liquid Crystal Displays (LCDs) to
display protection point identifica-
tion and system status. 2-Line
Alpha keypads also may display
messages and user instructions.
2. OFF KEY: Disarms the burg-
lary portion of the system, silences
alarms and audible trouble
indicators, and clears visual alarm
indications on the keypad after the
problem has been corrected.
3. AWAY KEY: Completely arms
both perimeter and interior
burglary zones for backup
protection by sensing an intruder's
movements through protected
interior areas. Also guards
protected doors, windows, etc.
Entrance can be made through an
entry delay zone without causing
an alarm if the system is disarmed
before the entry delay time
expires.

- 14 -
Functions of the Keypads (cont'd)
4. STAY KEY: Arms the perimeter
burglary sensors, guarding
protected doors, windows, and
other perimeter protection points,
and sounds an alarm if one is
opened. Interior protection is not
armed, which allows movement
within your house without causing
an alarm. Entrance can be made
through an entry delay zone
without causing an alarm if the
system is disarmed before the
entry delay time expires. If this
key is pressed twice in rapid
succession, the system is armed in
a higher level of security than
STAY arming. This higher level is
called NIGHT-STAY and
incorporates all the features of the
STAY mode, but also arms
selected interior zones (ask your
installer for further information).
5. MAX KEY: Arms in a manner
similar to AWAY mode, but
eliminates the entry delay period,
thus providing maximum
protection. An alarm will occur
immediately upon opening any
protection point, including entry
delay zones.
6. TEST KEY: Tests the system
and alarm sounder.
7. BYPASS KEY: Removes
individual protection zones from
being monitored by the system.
The keypad displays currently
bypassed protection zones.
8. INSTANT KEY: Arms in a
manner similar to STAY mode, but
turns off the entry delay period,
offering greater security while you
are inside and not expecting any
late visitors. An alarm will occur
immediately upon opening any
perimeter protection point,
including entry delay zones.
9. CODE KEY: Allows the entry
of additional user codes that can
be given to other users of the
system.
10. CHIME KEY: Turns the
CHIME mode on and off. When it
is on, any entry through a
protected delay or perimeter zone
while the system is disarmed will
cause beeping sounds at the
keypad(s) to alert the occupants.
11. READY KEY: When this key is
depressed prior to arming the
system, the keypad will display all
open protection zones within the
keypad's home partition.

- 15 -
Functions of the Keypads (cont'd)
12. # KEY: Permits arming of the
system without entering a security
code (“Quick Arm,” if programmed).
13. KEYS 0-9: Used to enter your
individual security access code(s).
14. READY INDICATOR: The system
is ready to be armed if this indicator
is lit. An unlit indicator means the
system is not ready (a zone is open).
15. ARMED INDICATOR: (RED) Lit
when the system has been armed in
the STAY, NIGHT-STAY, AWAY,
INSTANT, or MAXIMUM mode.
16. INTERNAL SOUNDER: Source of
audible internal warning and
confirmation sounds, as well as
alarms (see Summary of Audible
Notification section).
17. A-B-C-D KEYS: These keys (if
available) are function keys that
may be programmed to perform up
to 11 specific system functions. The
factory default settings for these
keys perform the following system
functions:
KEY FUNCTION
A CANCEL
B COMM TEST
C NOT USED
D SPECIAL FUNCTION #1
Refer to FUNCTION KEY Section
for further description of these four
keys.
IMPORTANT!
When you use the keypad to enter codes and
commands, press the keys within 2 seconds of
one another. If 2 seconds elapse without a key
depression, the entry is aborted and must be
repeated from its beginning.

- 16 -
Checking for Open Zones
Using the ✱Key
Before arming your system, all protected doors, windows, and other
protection zones must be closed or bypassed (see Bypassing
Protection Zones section). Otherwise the keypad will display a NOT
READY message. Pressing the [✱]key will display all zones that are
faulted, making it easier for you to secure any open zones.
NOTE: The green READY indicator on the keypad will be lit if the
system is ready to be armed. If it is not lit, the system is not
ready.
NOT READY - PRESS ✱
TO SHOW FAULTS
1.
✱Show faulted zones.
Press the [✱] key. (There is no need to
enter your security code in order to reveal
faulted zones.)
2.
FAULT 05 FRONT
UPSTAIRS BEDROOM Secure faulted zones.
Typical fault display shows open zone.
Secure or bypass the zone(s) displayed
before arming the system.
3.
***DISARMED***
READY TO ARM Arm the system.
The READY message is displayed when
all protection zones have been either
closed or bypassed.
You may now arm the system as
described on the following pages.

- 17 -
Arming Perimeter Only
(with Entry Delay)
Using the 3 Key
STAY
Use this key when you are staying home, but expect someone to use
the entrance door later.
When armed in STAY mode, the system will sound an alarm if a
protected door or window is opened, but you may otherwise move
freely throughout the premises. Late visitors can enter through the
entrance door without causing an alarm, but the system must be
disarmed within the entry delay period or an alarm will occur.
Close all protected perimeter windows and doors before
arming
(see
Checking for Open Zones section). The green READY
indicator (if present) on the keypad should be lit if the system is ready
to be armed.
1.
+ 3
(Security Code) STAY
Enter 4-digit security code, then press
the STAY key.
Example: Press 7 2 9 6, then 3
or, for Quick Arming
(if enabled): Press the [#] key followed by the STAY
key, or press and hold (for 2 seconds) the
function key programmed for STAY (if
available).
2.
***ARMED STAY***
***ARMED STAY***
You may exit now
Listen for 3 beeps.
The keypad beeps three times and displays the
ARMED STAY message. The red ARMED
indicator also lights.
The You may exit now portion of the
message disappears when the exit delay time
expires.
You can restart the exit delay at any time after arming in STAY mode
by pressing the ✴key. This is useful if you wish to open the
entry/exit door to let someone in or out after arming the system
without having to disarm the system and then re-arm it again†.
†Refer to the note at bottom of page 20 dealing with the automatic Exit Restart feature.

- 18 -
Arming Perimeter and Selected Interior Zones
(with Entry Delay)
Using the 3 Key to Arm Night-Stay
STAY
Use this key when you are staying home, but would like increased
security by arming preselected interior zones.
When armed in NIGHT-STAY mode, the system will sound an alarm
if a protected window or door is opened, or if one of the selected
interior zones is faulted. You may re-enter through the entrance door
without causing an alarm if one of the selected perimeter zones is not
faulted.
Close all protected perimeter windows and doors before
arming (see Check for Open Zones section). The green READY
indicator on the keypad should be lit if the system is ready to be
armed.
1.
+ 3+ 3
(Security Code) STAY STAY
Enter 4-digit security code, then
press STAY key twice.
Example: Press
7 2 9 6 , then 33
or, for Quick Arming
(if enabled): Press the [#] key followed by the
STAY key twice, or press and hold
(for 2 seconds) the function key
programmed for NIGHT-STAY (if
available).
2.
***NIGHT-STAY***
You may exit now
Listen for 3 beeps.
The keypad beeps three times and
displays the NIGHT-STAY message.
The You may exit now portion of the
message disappears when the exit
delay time expires.
You can restart the exit delay at any time after arming in NIGHT-STAY
mode by pressing the ✴key. This is useful if you wish to open the
entry/exit door to let someone in or out after arming the system without
having to disarm the system and then re-arm it again†.
†Refer to the note at bottom of page 20 dealing with the automatic Exit Restart feature.

- 19 -
Arming Perimeter Only
(with No Entry Delay)
Using the 7 Key
INSTANT
Use this key when you are staying home and do not expect anyone to
use the entrance door.
When armed in INSTANT mode, the system will sound an alarm if a
protected door or window is opened, but you may otherwise move
freely throughout the premises. The alarm will also sound
immediately if anyone opens the entrance door. Close all protected
perimeter windows and doors before arming (see Checking for
Open Zones section). The green READY indicator on the keypad
should be lit if the system is ready to be armed.
1.
+ 7
(Security Code) INSTANT
Enter 4-digit security code, then press the
INSTANT key.
Example: Press 7 2 9 6, then 7
or, for Quick Arming
(if enabled):
Press the [#] key followed by the INSTANT
key.
2.
ARMED * INSTANT*
you may exit now Listen for 3 beeps.
The keypad beeps three times and displays the
ARMED INSTANT message. The red ARMED
indicator also lights.
You can restart the exit delay at any time after arming in INSTANT
mode by pressing the ✴key. This is useful if you wish to open the
entry/exit door to let someone in or out after arming the system
without having to disarm the system and then re-arm it again†.
†Refer to the note at bottom of page 20 dealing with the automatic Exit Restart feature.

- 20 -
Arming All Protection
(with Entry Delay)
Using the 2 Key
AWAY
Use this key when no one will be staying on the premises.
When armed in AWAY mode, the system will sound an alarm if a protected
door or window is opened, or if any movement is detected inside the premises.
You may leave through the entrance door during the exit delay period
without causing an alarm. You may also re-enter through the entrance door,
but must disarm the system within the entry delay period or else an alarm
will occur†.
NOTE: If the Auto Stay feature is enabled (ask your installer) and the system
is armed from a hard-wired keypad, and no entry/exit zone is violated during
the exit time, the system will revert to the STAY mode.
Close all protected perimeter windows and doors before arming (see
Checking for Open Zones section). The green READY indicator (if present)
on the keypad should be lit if the system is ready to be armed.
1.
+ 2
(Security Code)
AWAY
Enter 4-digit security code, then press
the AWAY key.
Example: Press 7 2 9 6, then 2
or, for Quick Arming
(if enabled): Press the [#] key followed by the AWAY
key or press and hold (for 2 seconds) the
function key programmed for AWAY (if
available).
2.
ARMED**AWAY**
You may exit now Listen.
The keypad beeps twice, or beeps continuously
if Exit Warning has been programmed for your
system, and displays the ARMED AWAY
message. The red ARMED indicator also
lights.
The You may exit now portion of the
message disappears when the exit delay time
expires†.
†NOTE: There is an automatic Exit Restart feature built into your system. It works this way: If
you realize that you forgot something and have to go back inside the premises (within the
original exit delay time), as soon as you re-enter, a new exit delay time sequence is started. This
restarting of the exit delay time occurs only once during each arming session, however;
therefore you're permitted only one return without setting off alarms.