Pulsar ARADIN2 User manual

INSTALLATION GUIDE
ENGLISH
Code: ARADIN2
Name: Enclosure with a DIN rail for RACK cabinets, 24xS, 160mm deep
IM ARADIN2
Edition: 1st from 10.06.2013
Supersedes: -------------------
1. Intended use: EN*
The enclosure with a DIN rail for RACK cabinets is intended for mounting equipment located inside DIN enclosures, for
RACK 19’’ cabinets. The enclosure features a DIN rail, length: 24x1S. The height of the mounted module cannot exceed
160mm. The enclosure can accommodate max. 24 fuses, 1 S wide. Six M6 screws with cage nuts for mounting in RACK
cabinets are included. The enclosure features a 50x18 mm labeling field. There are cable ducts in the top and bottom
panel of the enclosure, 10 pieces. A holder for a 7Ah/12V battery is included.
2. Specifications:
SPECIFICATIONS
External dimensions W=481,5 H=132 D=234 [mm, +/-2]
Internal dimensions W=445 H=125 D=155
Operation temperature range - 10
o
C ÷ +40
o
C
Net/gross weight 3,2/3,4 [kg]
Materials sheet metal DC01, 1,0mm thick
rust protection
colour: RAL 9005 BLACK
Enclosure/IP. IP20
Use inside
Closing bolted
Notes
- the enclosure can accommodate max. 24 fuses, 1 S wide
- the enclosure features a 50x18 mm labeling field
- the enclosure is equipped with 6 M6 screws with cage nuts for
mounting in RACK cabinets and a holder for a 7Ah/12V battery
Declarations RoHS
3. Dimensions:

4. Enclosure:
MANUFACTURER
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail]
www.pulsar.pl , www.zasilacze.pl
WARRANTY
12 months from the date of purchase.
THE WARRANTY IS VALID only upon presentation of t e item’s proof of purc ase.