Pulsar AWO 620 User manual

INTALLATION MANUAL
ENGLISH
code: AWO 620
name: Enclosure DIN/Plate
metal enclosure for: SSWiN, KD,….
IM620
1st Edition, 02 Feb 2012
Supercedes t e: ------------------------ edition
1 Intended use:
Due to its design, t e AWO620 enclosure can be used as an integrating part of installation systems,
suc as: CCTV, KD, SSWiN, etc. T e enclosure is to be used for mounting (depending on
configuration):
LEVEL 1: 1) system KD controller and additional modules or ot er devices adjusted for
mounting on a TH35 (35mm) DIN rail
2) transformer, series: TRP, TRZ, TOR
3) enclosed power supply units, series: PS, PSB
4) alarm control units and optional modules (wit additional AWO620PL mounting
plate)
LEVEL 2: 1) alarm control units and optional modules
2) ot er devices, i.e.: switc , router, etc.
2 Product description:
T e enclosure enables mounting t e devices on 2 LEVELS, at t e bottom and in t e mounting plate.
LEVEL 1:
T e enclosure, in its standard version, includes 2 DIN rails, of 315 mm, mounted to t e bottom. T ere
is also an option to add a DIN rail (AWO620DIN), max. 3 per enclosure.
Instead of a DIN rail, a mounting plate (AWO620PL) of working dimensions: 320mm x 180mm can be
fitted. T e enclosure as an additional mounting plate used for installing transformers and power
supply units.
LEVEL 2:
T e enclosure is quipped wit a inged mounting plate of working dimensions: 290mm x 190mm.
T at facilitates t e access to t e devices mounted at t e bottom of t e enclosure (level1)
T e enclosure accommodates a 17A /12V battery. Anti-tampering system indicates an unaut orized
opening of t e enclosure. T ere is also a possibility to mount an additional anti-tampering system,
w ic would prevent t e device from being ripped off t e wall (PKAZ005). In a basic version, t e
enclosure is bolted in t e faceplate wit 2 screws. T e faceplate is embossed so t at a lock assembly
can be fitted. T e lock can ave t e same code: MR027, or a different one: MR008.
T ere is an 8mm space between t e enclosure and t e wall for t e cables of t e device
accommodated by t e enclosure.
3 Mounting:
T e enclosure s all be mounted by a qualified installer wit appropriate permissions and qualifications
for 230V/AC installations and low-voltage installations (required and necessary for a given country). It
s all be fitted in confined spaces, according to t e environment class II, wit normal air umidity
(RH=90% max. wit out condensation) and t e temperature from -10°C to +40°C.

2
4 Specifications:
SPECIFICATIONS
Fitting battery 2x17Ah/12V
Anti-tamper protection 1x – enclosure opening
TAMPER – output ampacity (max) 500mA@50Vdc
Enclosure: IP IP 20
Operating temperature -10ºC÷40ºC
Relative umidity RH – max. 90 [%]
Internal dimensions
(WxHxD)
335 x 505 x 150
[-/+2] [mm]
Additional accessories
AWO 620PL sheet metal for DIN2 320mm x 180mm – LEVEL 1
AWO620DIN rail for DIN2 310mm – LEVEL 1
Lock assembly, same code MR027
Lock assembly, different code MR008
Insulating gland M20x1,5 - ML145
TAMPER, against ripping off the wall PKAZ005
Materials
Sheet metal DC01, thickness: 1,0mm
Rust protection
Colour: RAL 7035 grey, texture finish
Use Inside/
Surface-mounted
Net weig t ~3 80 [kg]
Gross weig t ~4 10 [kg]
Specifications of transformers that can be mounted in the enclosure:
CODE NAME C S U I U1 or U2 or U3 I1 or I2 or I3
F t
AWT053 TRP 20/12/14 PC/ABS
UL94 V-0
IP20 20VA 230V/AC 0,12A
12V or 14V 1,6A or 1,4A
T 200mA/250V 130
o
C
AWT050 TRP 20/16/18 PC/ABS
UL94 V-0
IP20 20VA 230V/AC 0,12A
16V or 18V 1,2A or 1,0A
T 200mA/250V 130
o
C
AWT268 TRZ20/16/18 PC/ABS
UL94 V-0
IP43 20VA 230V/AC 0,12A
16V or 18V 1,2A or 1,0A
T 200mA/250V 130
o
C
AWT150 TRP 40/16/18
PC/ABS
UL94 V-0
IP20 40VA 230V/AC 0,20A
16V or 18V 2,2A or 2,0A
T 315mA/250V 130
o
C
AWT468 TRZ40/16/18 PC/ABS UL94 V-0
IP43 40VA 230V/AC 0,20A 16V or 18V
2,2A or 2,0A
T 315mA/250V 130
o
C
AWT
5161820 TRZ50/16/18/20
PC/ABS
UL94 V-0
IP43
50VA 230V/AC 0,25A
16V or 18V or 20V 3,0A or 2,8Aor 2,5A
T 500mA/250V 130
o
C
AWT
5172430 TRZ50/17/24/30 PC/ABS
UL94 V-0
IP43 50VA 230V/AC 0,25A
17V or 24Vor 30V 2,9A or 2,1Aor 1,7A
T 500mA/250V 130
o
C
AWT
8161820 TRZ80/16/18/20 PC/ABS
UL94 V-0
IP43 80VA 230V/AC 0,4A
16V or 18Vor 20V 5,0A or 4,5Aor 4,0A
T 630mA/250V 130
o
C
AWT
8172430 TRZ80/17/24/30 PC/ABS
UL94 V-0
IP43 80VA 230V/AC 0,4A 17V or 24Vor 30V
4,7A or 3,3Aor 2,7A T 630mA/250V 130
o
C
AWT037
TOR 50/16/18/20 - 50VA 230V/AC 0,25A 16V or 18V or 20V 3,0A or 2,8Aor 2,5A T 500mA/250V 130
O
C
AWT049
TOR 50/17/24/30 - 50VA 230V/AC 0,25A 17V or 24V or 30V 2,9A or 2,1Aor 1,7A T 500mA/250V 130
O
C
AWT039
TOR 80/16/18/20 - 80VA 230V/AC 0,4A 16V or 18V or 20V
5,0A or 4,5Aor 4,0A
T 630mA/250V 130
O
C
AWT048
TOR 80/17/24/30 - 80VA 230V/AC 0,4A 17V or 24V or 30V
4,7A or 3,3Aor 2,7A
T 630mA/250V 130
O
C
C - Enclosure of a transformer
S – Supply power
U – Mains supply

3
I - Current consumption at ~230V nominal load
U1 or U2 or U3 – Secondary voltage
I1 or I2 or I3 – Nominal output current
F – F fuse in t e primary circuit of t e transformer
t - T ermal fuse 130
o
C, not resettable
Specifications of power supply units that can be mounted in the enclosure:
CODE Current Supply power Output voltage PSU type
PS251220 12V/2A 25W 12V÷15VDC Switchmode
PS401230 12V/3A 40W 12V÷15VDC Switchmode
PS601250 12V/5A 60W 12V÷15VDC Switchmode
PS1001270 12V/7A 100W 12V÷15VDC Switchmode
PS15012100 12V/10A 150W 12V÷15VDC Switchmode
PS2001214 12V/14A 200W 12V÷15VDC Switchmode
PS402418 24V/1,8A 40W 24V÷28VDC Switchmode
PS1002435 24V/3,5A 100W 24V÷28VDC Switchmode
PS2002470 24V/7A 200W 24V÷28VDC Switchmode
PS602425 24V/2,5A 60W 24V÷28VDC Switchmode
PS1502450 24V/5A 150W 24V÷28VDC Switchmode
PSB351225 13,8V/2,5A 35W 12V÷14VDC Buffer, switch mode
PSB501235 13,8V/3,5A 50W 12V÷14VDC Buffer, switch mode
PSB1001270 13,8V/7A 100W 12V÷14VDC Buffer, switch mode
PSB15512110 13,8V/11A 155W 12V÷14VDC Buffer, switch mode
PSB352413 27,6V/1,3A 35W 24V÷28VDC Buffer, switch mode
PSB502418 27,6V/1,8V 50W 24V÷28VDC Buffer, switch mode
PSB1002435 27,6V/3,5A 100W 24V÷28VDC Buffer, switch mode
PSB1552455 27,6V/5,5A 155W 24V÷28VDC Buffer, switch mode

4
Fig.1 Examples of possible configurations
PRODUCENT / PRODUCER
Pulsar K.Bogusz Sp.j.
Siedlec 150,
32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
W
ARRANTY
:
24 months from the purchase date, 36 months from the production date.
A valid proof of purchase is required.