Pulsar CAL. W440 User manual

CAL. W440
DIGITAL QUARTZ
●Time/calendar
●URL memo function
●Message function
●10-hour stopwatch
●Countdown timer
with preset and adjustable timer functions
●Regular alarm and 3-channel single-time alarm
●Illuminating light (electroluminescent panel)
ENGLISH

2
English
MODE CHANGE
AWith each press, the mode changes in the following order:
➡
TIME/
CALENDAR URL MEMO MESSAGE
➡
➡
ALARM TIMER
➡
➡
➡
➡
➡
STOPWATCH
[horizontal]
With each press in TIME/CALENDAR mode, the display changes
between horizontal and vertical alternately.
B
AB
[vertical]
B

3
English
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
E
Clockwise turning:
Digits decrease.
Counterclockwise
turning: Digits increase.
Press for 2 to 3 seconds to show TIME/CALENDAR SETTING
display.
B
E
▲
▲
E
▲
Turn clockwise or counter-
clockwisetosettheflashingdigits.
Press to select the digits to be
adjusted. Selection of the digits
Seconds ➾Minutes ➾Hour
Date
➾
➾
▲
BReturn to TIME/CALENDAR mode.
Month
➾
➾
Year
➾
12-/24-hour
indication
B

4
English
SHOWING CALENDAR DISPLAY
ETurn clockwise or counterclockwise to show CALENDAR display
instead of TIME display.
TURNING ON/OFF OF HOURLY TIME SIGNAL AND
BUTTON OPERATION CONFIRMATION SOUND
CWith each press, the hourly time
signal and sound for button
operation confirmation are
alternately switched on and off.
* When the hourly time signal mark
is displayed, the hourly time signal
rings every hour on the hour and
the confirmation sound beeps
with each press of the buttons.
C
Hourly time signal mark

5
English
DISPLAYING MESSAGES
EPress to show a message.
* A message appears and scrolls three
times.
• If you have recorded any messages, such message alone will be displayed.
• If no message is recorded, the built-in messages will be displayed one by one
with each press of button E.
●The watch also displays a message automatically every 10 minutes. The
message scrolls three times.
• If you have recorded any messages, such message alone will be displayed.
• If no message is recorded, the built-in messages will be displayed one by one
in random order.
* On January 1 and December 25, “A happy new year.” and “Merry Xmas!”
are displayed, respectively.
E

6
English
STOPWATCH MODE
●The stopwatch measures up to 10 hours in 1/100 second increments.
RESET
C
▲
START
EC
▲
RESET
C
STOP
E
▲
▲
• • • • • • •
C
SPLIT RELEASE
▲
SPLIT
C
▲
START
E
C
FINISH TIME OF
1ST COMPETITOR FINISH TIME OF
2ND COMPETITOR
E
2ND COMPETITOR
FINISHES
▲
▲
Split time measurement
Measurement of two competitors
CSplit / Split release / Reset
EStart / Stop / Restart
(Press the button.)

7
English
TIMER MODE
PRESET TIMER SETTING
ETurn clockwise or counterclockwise to select the preset time.
Selection of the preset time/adjustable timer
1 min. ⇔ 2 min. ⇔ 3 min. ⇔ 4 min. ⇔ 5 min. ⇔ 10 min.
Adjustable timer ⇔ 30 min. ⇔ 25 min. ⇔ 20 min. ⇔ 15 min.
⇔
⇔
B
●Two types of timer are available: 10-channel preset timer and adjustable timer.
●The adjustable timer can be set up to 9 hours and 59 minutes in minute
increments.
E
Clockwise turning:
Digits decrease.
Counterclockwise
turning: Digits increase.

8
English
ADJUSTABLE TIMER SETTING
TIMER OPERATION
ETurn clockwise or counterclockwise to select the adjustable timer.
(See the previous page)
▲
Press for 2 to 3 seconds to show ADJUSTABLE TIMER SETTING
display.
B
▲
E
▲
Press to select the digits to be adjusted (hour/minutes).
▲
ETurn clockwise or counterclockwise to set the flashing digits.
▲
BReturn to TIMER mode.
CReset
EStart / Stop / Restart
(Press the button.)

9
English
ALARM MODE
ALARM TIME SETTING
E
Clockwise turning:
Digits decrease.
Counterclockwise
turning: Digits increase.
Selection of the regular alarm/single-time alarm
⇔⇔⇔
➾
➾
Regular alarm
AL-D
Single-time
alarm-1
AL-1
Single-time
alarm-2
AL-2
Single-time
alarm-3
AL-3
ETurnclockwiseorcounterclockwisetoselectthedesired alarmchannel.
▲
●Regular alarm and 3-channel single-time alarm are available.
●Each of the three single-time alarms can be set to ring only once at the designated
time. As it rings, it is automatically disengaged.
B

10
English
BPress for 2 to 3 seconds to show ALARM SETTING display.
▲
EPress to select the digits to be adjusted (hour/minutes).
▲
▲
ETurn clockwise or counterclockwise to set the flashing digits.
▲
BReturn to ALARM mode.
* “ON” mark appears and the alarm is automatically engaged.
E
ALARM ENGAGEMENT/DISENGAGEMENT
●The alarms can be engaged and disengaged independently of one another.
Turn clockwise or counter-
clockwise to select the desired
alarm channel.
C
▲
With each press, the selected
alarm is engaged and
disengaged alternately.
C
E

11
English
URL MEMO MODE
●Up to 100 URL memos such as Internet homepage address and electronic mail
address can be registered for display.
●Up to 60 characters can be entered for each URL memo.
●The residual memory capacity can also be indicated.
B
E

12
English
Enter a new data by operating the buttons as explained in “HOW TO
ENTER CHARACTERS” on pages 17 - 18.
▲
EAfter the data is entered, press to deactivate NEW DATA ENTRY
function.
ENTERING A NEW DATA
BPress for 2 to 3 seconds to show MENU display.
▲
ETurn clockwise or counterclockwise to select the data entry operation
(NEW).
E
▲
▲
* The data you have just entered is registered in memory.
Selection of the operation
⇔⇔⇔
New entry
NEW
Correction
EDIT
Deletion of
one data
DEL
Deletion of
entire data
CLR
➾
➾
While “NEW” is flashing, press to activate NEW
DATA ENTRY function.

13
English
CORRECTING THE DATA
ETurn clockwise or counterclockwise to select the data to be corrected.
▲
BPress for 2 to 3 seconds to show MENU display.
▲
ETurn clockwise or counterclockwise to select the data correction
operation (EDIT).
▲
EWhile “EDIT” is flashing, press to activate DATA
CORRECTION function.
▲
Correct the data by operating the buttons as explained in “HOW TO
ENTER CHARACTERS” on pages 17 - 18.
▲
EAfter the data is corrected, press to deactivate DATA CORRECTION
function.
* The data you have just corrected is registered in memory.

14
English
DELETING ONE DATA
Turn clockwise or counterclockwise to select the data to be deleted.
E
▲
BPress for 2 to 3 seconds to show MENU display.
▲
ETurn clockwise or counterclockwise to select the single data deletion
operation (DEL).
▲
EWhile “DEL” is flashing, press to activate SINGLE
DATA DELETION function.
▲
EPress while “YES” is flashing.
▲
EPressandholdfor4secondstodeletetheselected
data.
* A confirmation sound beeps and “DELETE COMPLETE” is displayed for 2
seconds. Then, the display returns to URL MEMO mode.

15
English
DELETING THE ENTIRE DATA
BPress for 2 to 3 seconds to show MENU display.
▲
ETurnclockwiseorcounterclockwisetoselectthealldataclearoperation
(CLR).
▲
EWhile “CLR” is flashing, press to activate ALL
DATA CLEAR function.
▲
EPress while “YES” is flashing.
▲
EPress and hold for 4 seconds to delete all the
data.
* A confirmation sound beeps and “ALL CLR COMPLETE” is displayed for 2
seconds. Then, the display returns to URL MEMO mode.

16
English
DISPLAYING THE URL MEMO
●Selection of the URL memo
ETurn clockwise or counterclockwise.
* With each turn, the first 16 characters of a stored URL memo are
displayed.
* The stored data is displayed one by one starting from the last to the
first or the first to the last according to the data arrangement in
memory by turning button E counterclockwise or clockwise,
respectively.
●Scroll display of the selected URL memo
EPress after selecting a desired URL memo.
* When the selected URL memo has 15 or more characters, it will scroll
three times and then remain displayed.
* When the selected URL memo has 14 or less characters, it will not
scroll but will be displayed with “ ” at its beginning and “ ” at its
end.
▲
▲

17
English
HOW TO ENTER CHARACTERS
●Selection of type of characters
APress to select the type of characters.
Katakana
(Japanese characters) English capital letters
➾English
small letters
➾
Numerals and symbols
➾
➾
ETurn counterclockwise.
●Selection of characters in Japanese syllabary, alphabetical or
numerical order
A C
E

18
English
ETurn clockwise.
●Selection of characters in reverse Japanese syllabary, alphabetical
or numerical order
●Character entry / rightward advancement of cursor
EPress to enter the character indicated by the cursor.
●Space insertion
Press at the same time.
C
&
A
●Deletion of one character
Press button E while keeping button C pressed.
E
&
C
●Rightward advancement of the cursor
E
&
CTurn button E counterclockwise while keeping button
C pressed.
●Leftward movement of the cursor
E
&
CTurn button E clockwise while keeping button C
pressed.

19
English
MEMORY CAPACITY INDICATION
CPress to show the residual memory
capacity for URL MEMO mode.
* The residual memory capacity is
displayed for 2 seconds, and the watch
automatically returns to the display
previously shown.
* The watch will also return to the display
previously shown by pressing button B,
C or E.
C
Residual memory capacity / Total memory capacity

20
English
MESSAGE MODE
●Up to 10 messages, each of which contains up to 60 characters, can be registered
and displayed together with the date when they are to be displayed.
●On the designated date, the registered message scrolls on the display every 10
minutes.
●ThescrollingmessagealsoappearsbypressingbuttonEintheTIME/CALENDAR
mode. (See “DISPLAYING MESSAGES” on page 5)
●The residual memory capacity can also be indicated.
* For using the MESSAGE mode, follow the procedures described in “URL MEMO
MODE”.
ILLUMINATING LIGHT (Electroluminescent panel)
DTurn on the illuminating light.
* The display panel is evenly illuminated for 3
seconds.
D