Pulsar NX04 User manual

INSTRUCTION MANUAL FOR WATCH CALIBRE
NX04

THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed or placed inside any part of the body, the battery can
cause severe or fatal injuries within 2 hours or less.
Button batteries are hazardous whether new or used. Keep batteries
out of reach of children.
If you think the battery may have been swallowed or placed inside
any part of the body, seek immediate medical attention. Contact the
Australian Poisons Information Centre immediately on 13 11 26
(New Zealand 0800 764 766) for 24 / 7 fast, expert advice.

ENGLISH
CAL. NX04
DUO-DISPLAY QUARTZ
●Time/calendar display
●Demonstration function
●World time
●Stopwatch
●Regular alarm
●Single-time alarm
●Illuminating light
(Electroluminescent panel)

2
English
CROWN/BUTTONS AND DISPLAYS
A
CB
D
Date Day
Minute hand
SecondsMinutesHour
Second hand
Hour hand
CROWN
a: Normal position b: Extended position
a b

3
English
REGULAR
ALARM
With each press, the mode in the digital display changes in the following
order:
TIME/
CALENDAR WORLD TIME STOPWATCH
➡➡
➡
➡
A
Press in TIME/CALENDAR mode to show SINGLE-TIME ALARM
mode. TIME/CALENDAR SINGLE-TIME ALARM
➡
C
With each press in the TIME/CALENDAR mode, the display changes
in the following order:
D
Time/Calendar Calendar
➡
Blank
➡
➡

4
English
SCREW DOWN CROWN
[for models with screw down crown]
Locking the crown
1Turn Crown counterclockwise until you no
longer feel the threads turning.
2Crown can be pulled out.
1Push Crown back in to normal position.
2TurnCrownclockwisewhilepressing it lightly
until tight.
Unlocking the crown

5
English
TIME/CALENDAR MODE
●Before setting the analogue time, be sure to set the digital time.
DIGITAL TIME/CALENDAR SETTING
Press to show TIME/CALENDAR
mode.
▲
Press for 2 to 3 seconds to show
TIME/CALENDAR SETTING
display.
Date Day C
●Once the time/calendar of your area is set in the TIME/CALENDAR mode, the
times of the 27 cities covered in the WORLD TIME mode will be set automatically.
A D
SecondsMinutesHour
* The world map and
a city mark appear,
and the part of the
map representing
the city flashes.
City mark
A
A

6
English
City ➾Seconds ➾Minutes ➾ Hour ➾ Year ➾Month ➾Date
➾
12-/24-hour indication
➾
▲
Press to select the digits/segments to be adjusted (flashing).
Press to set the flashing digits/segments.
Press to return to TIME/CALENDAR mode.
▲
C
D
A
▲

7
English
1Pull out when the second hand is
at the 12 o’clock position.
2Turn to set the hour and minute
hands to the time shown in the
digital display.
3Push back in to the normal
position when the second digits
count “00” in the digital display.
ANALOGUE TIME SETTING
CROWN
Hour hand
➠
➠
Minute hand
Second hand
1
3
2
A convenient way of using the TIME/CALENDAR mode
When you travel around different time zones, the time and calendar of the place
you visit can easily be shown in the TIME/CALENDAR mode.

8
English
1Press button A for 2 to 3 seconds in the TIME/CALENDAR mode to show
the TIME/CALENDAR SETTING display.
2Press button D repeatedly to select the city representing the place you are
visiting.
3Press button A to return to the TIME/CALENDAR mode, and then, adjust
the hands to the digital time.
●The watch shows the modes and displays in order.
DPress for 2 to 3 seconds in TIME/CALENDAR mode to start the
demonstration.
* The modes and displays are shown for 2 seconds in the following order:
DEMONSTRATION FUNCTION
Time/calendar
display Calendar
display WORLD TIME mode
REGULAR
ALARM mode
➾
➾
➾
➾➾
➾
* To stop the demonstration, press any of the buttons. The watch will
return to the TIME/CALENDAR mode.
Blank display STOPWATCH
mode