Pulsar W621 User manual

ENGLISH
CAL. W621
DIGITAL QUARTZ
●Time/calendar
●Stopwatch with 8 lap memory
●Countdown timer with preset and adjustable
timer functions
●Daily alarm
●Stroke function
●Electroluminescent panel

English
2
MODE CHANGE
TIME/CALENDAR
➡
TIMERALARM
STOPWATCH
➡
STROKE
➡
➡
➡
(No mode mark in
TIME/CALENDAR mode)
Mode mark
A
Change modes

English
3
TIME/CALENDAR MODE
TIME/CALENDAR SETTING
B
▲
C
▲
D
B
▲
▲
Press for 2 to 3 seconds.
Select the digits to be adjusted.
Set the flashing digits.
Return to TIME/CALENDAR mode.
✽Selection of the digits
Seconds Minutes Hour Date
➾➾➾
➾
➾
Year Month
➾
12-/24-hour indication
➾
BC
D

English
4
STOPWATCH MODE
✽Lap time measurement
C
START
▲
D
LAP
▲
D
LAP
▲
• • • • C
STOP
▲
D
RESET
●The stopwatch measures up to 10 hours in 1/100 second increments.
CStart / Stop / Restart
Time measured
B
DReset /
Measure lap time
Current time

English
5
MEMORY RECALL FUNCTION
●The stored data can be recalled either during or after the measurement.
D
BPress to activate the memory recall
function.**
With each press, stored data are
recalled from the oldest to the newest.
▲
▲
BReturn to STOPWATCH mode.
**In memory recall after measurement, the
oldest data in memory is displayed.
In memory recall during measurement, the
newest one is displayed.
B
D

English
6
STROKE MODE
●The number of strokes per minute is automatically calculated by measuring the
time required to make three strokes.
C
C
Press to start measurement.
Press to stop measurement when
the third stroke is made.
▲
* The number of strokes per minute
will be displayed.
C

English
7
TIMER MODE
●Two types of timer are available: preset timer and adjustable timer.
DSelect the preset time.
PRESET TIMER SETTING
✽Selection of the preset time
3 min. ➾5 min. ➾10 min. ➾15 min.
➾
20 min.
➾
30 min.45 min. 40 min. 35 min.
➾
➾➾➾
ADJUSTABLE TIMER SETTING
Press for 2 to 3 seconds.
B
▲
BC
D

English
8
C
▲
D
B
▲
▲
Select the digits to be adjusted
(hour/minutes).
Set the flashing digits.
Return to TIMER mode.
TIMER OPERATION
* When the set time is up, a warning sound beeps for 5 seconds. To stop it manually,
press any one of the buttons.
CStart / Stop / Restart
Time measured
DReset
No. of times
the countdown
is repeated
B

English
9
ALARM MODE
ALARM SETTING B
▲
C
▲
D
B
▲
Return to ALARM mode.
▲
Press for 2 to 3 seconds.
Select the digits to be adjusted
(hour/minutes).
Set the flashing digits.
* The alarm is automatically engaged.
✽Alarm engagement/disengagement
CEngage/disengage the alarm
“on” mark
Alarm mark [ ]
Alarm
engaged
BC
D

English
10
✽Turning on/off of hourly time signal and button operation confirmation sound
CWith each press in TIME/CALENDAR
mode, hourly time signal and confirmation
sound are turned on and off alternately.
ILLUMINATING LIGHT (Electroluminescent panel)
* The display panel is illuminated
for 3 seconds.
Hourly time signal mark [ ]
ETurn on the illuminating light.