PureAir Motion User manual

Automobile Air Purification
Owner’s Manual

2WELCOME
Thank you for your purchase of the pureAir Motion. The technology in the unit is
designed to clean your vehicle’s breathing space of smoke, bacteria, viruses, VOC’s
(Volatile Organic Compounds), dust and other particulates. With minimal cleaning and
maintenance, you can keep Motion in its optimal working condition.
Packaged Materials:
1 Motion Air Purier
1 12V DC Power Cable
1 Owner’s Manual
Records:
Purchase Date:_____________________________________________________________________________
Model Number: ____________________________________________________________________________
Serial Number:______________________________________________________________________________
Retailer Name: _____________________________________________________________________________
Retailer Phone: _____________________________________________________________________________

Copyright © 2015 GreenTech Environmental, LLC. | All Rights Reserved
3
TABLE OF CONTENTS
Uses & Features ........................................................... 4
Warnings ................................................................ 5
Product Introduction / Control Panel and Unit Top............................. 6
Product Introduction / Unit Rear ............................................ 7
Setup ................................................................. 8 - 9
Operation ........................................................... 10 - 11
Maintenance ........................................................ 12 - 14
Cleaning .............................................................15 - 16
Product Specications..................................................... 17
Warranty Information ...................................................... 18

4USES & FEATURES
Uses
• Clean and removes particulates from your breathing space
• Signicantly reduces bacteria, viruses, & VOC’s in the air
Features
• Cleanable Unit Body and Filter
• Replaceable ION Generator
• Quiet Operation
• Convenient Design
NOTE: Motion is not a medical device and should not be used to alleviate any respiratory issues
you may have. Please consult your doctor before using the Motion if you are worried
that the machine could cause adverse effects.

Copyright © 2015 GreenTech Environmental, LLC. | All Rights Reserved
5
WARNINGS
NOTE: For your safety, please read through these warnings before using Motion.
Do not change settings on the unit while driving.
Do not place in a location that will obstruct your view while driving.
Do not block either air vent.
Be careful with liquids near the unit.
Unplug this unit before cleaning or maintenance.
Unplug this unit when not in use.
Mechanical or Electrical Maintenance must be performed by the manufacturer or
licensed professional. Failure to adhere to this will void your warranty.
If there is any damage to the unit or wiring, stop using immediately and contact the
manufacturer for repairs or replacement.

6PRODUCT INTRODUCTION / Control Panel & Unit Top
Air Vent Out
Mode/Fan Speed
Fan Speed Indicator
Ion Generator Replacement Light
Ion Generator Lifetime Reset
Clean Filter Light
11
2
2
3
3
4
4
5
5
6
6

Copyright © 2015 GreenTech Environmental, LLC. | All Rights Reserved
7
PRODUCT INTRODUCTION / Unit Rear
Ion Generator
DC Power Plug In
Filter
Rear Cover Release
DC Power Adapter
7
7
8
8
9
9
10
10
11
11

8SETUP
Push on the Rear Unit Cover Release Button and slide the
plate down and off the unit.
Place the DC Plug in the DC Power Plug In and situate the
cord in one of its two cable ports along the side of the unit.
Replace the Rear Unit Cover.

Copyright © 2015 GreenTech Environmental, LLC. | All Rights Reserved
9
SETUP
Secure the Power Plug into the Vehicle’s 12V Outlet.
Place the unit in a cup holder or another secure location that
will not distract the driver.

10 OPERATION
NOTE: To improve the Ion Output, use the unit in conjunction with your vehicle’s Air Conditioning.
WARNING: Do not change settings on Motion while driving your vehicle.
Push the Mode Button once. The unit will now run in Low
Output Mode. (Denoted by One Arrow on Fan Speed Indicator)
Pushing the Mode Button again will change to High Output
Mode. (Denoted by Two Arrows on Fan Speed Indicator)