PureLink DOF4 User manual

DOF4 Owner’s Manual
Modular Fiber Optic DVI Extender
With Stereo Audio
PURELINK
535 E CRESCENT AVE
RAMSEY, NJ 07446
Tel: [phone]
Fax: [phone]
E-mail: [email protected]
www.purelinkav.com
For technical support, contact:
[email protected]

PureLink by Dtrovision
2
Package Contents
Please make sure all of the following items are included in the package:
1) DOF4 Transmitter Module
2) DOF4 Receiver Module
3) DC 12V Power Supply Unit with a power cord
Manual version
Release date
1.0
5/1/2017

PureLink by Dtrovision
3
General Specification
DOF4 is a DVI and analog stereo audio extension system over pure fiber optic cable for
long distance up to 5,000ft.
Compact & durable design and low power consumption makes it an ideal solution for
connection for high definition video/audio signal of digital displays such as LCD/Plasma
displays and projectors.
DOF4’s unique circuitry and optic conversion design eliminates the need of a copper
connection (Cat 5) between the transmitter and receiver. This pure fiber optic
connection enables electrical noise free and EMI free that is ideal for long distance
extension of high definition DVI signal, and stereo analog signal.
PureLink also offers same function extender in rack mountable friendly version. Check
DT1000 (transmitter) and DR1000 (receiver) if you plan to use them in rack mountable
environment.
Model
DOF4 Tx/Rx
Input Signal
Digital RGB(DVI), Analog Stereo Audio
Output Signal
Digital RGB(DVI), Analog Stereo Audio
Supporting Display
Resolutions
VGA ~WUXGA(up to 1920 x 1200 @ 60Hz) ,
480i ~ 1080p
Max. Distance
1920x1200 @ 60Hz or at 1080p: 1,000M(3,300ft)
1280x1024 @ 60Hz or at 1080i: 1,530M(5,000ft)
Optical Source
850 nm Vcsel
Optical Cable Spec
Multimode 50/125 or, 62.5/125
Connector Type
DC Power Jack
DVI 29 Pin Female
LC Receptacles with 4 cores
3.5mm Stereo Audio Jack
Conformations
DDWG DVI1.0
With HDCP
Power Rating
DC +12V , 10W Max
Dimension (WxDxH)
4.3” x 3.1” x 1.6” / 109 x 78.75 x 40.64 mm
Weight (per unit)
0.9 lbs / 0.4 kg

PureLink by Dtrovision
4
Operation and Reliability Specification
1. Operating Environment
Temperature : 50F ~ 104F (10℃~ 40℃)
Humidity : 10% ~ 80%
Altitude : 3,000m Max.
2. Transit Environment
Temperature : -13F ~ 140F (-25℃~ 60℃)
Humidity : 5% ~ 95%
Altitude : 15,000m Max.
3. Storage Environment
Temperature : -4F ~ -49F (-20℃~ 45℃)
Humidity : 5% ~ 95%
Altitude : 3,000m Max.
4. Reliability
MTBF: 90% at over 50,000 hours aging test
In compliance with LCD Monitor reliability test standard

PureLink by Dtrovision
5
Main Features
1. Zero loss & Zero noise delivery of digital high definition video and audio signal us
ing optical conversion technology, DOF4 delivers HD signals over fiber optic cable
s without loss or digital interference maintaining the clarity and colors. Noise can
cellation and error correction logic enhances DVI video and audio signals over lo
ng distance.
2. Built-in signal repeater to support longer distance between the source and the
DOF4 transmitter & DOF4 receiver and the display.
3. Compact and Robust Module Design
4. Long Distance (Up to 5000ft at 1080i or lower signal) over cost effective multi-m
ode fiber optic cables.
5. Auto EDID Management
The definition of Auto EDID management is a way of saving EDID of a monitor
into EEPROM in the transmitter module. DOF4 transmitter has 14 different pre-
programmed EDID data that can be conveniently selected by end-user. User can
also emulate/save display’s EDID information into the transmitter which
enhances reliability and compatibility with various displays
6. HDCP (High-bandwidth Digital Content Protection) Support.
7. DDWG DVI version 1.0 Support.
8. Rack mounting friendly versions also available (DT1000 & DR1000)

PureLink by Dtrovision
6
Installation and Connection Instructions
Installation and Connection Instructions
1. Turn off both the video source and the display before connecting any cables.
2. Connect DVI cable between the source and DOF4 transmitter AND between the
DOF4 receiver and the display.
3. Connect LC terminated fiber optic cables according to the picture below;
4. Connect the power supply unit to both DOF4 transmitter and receiver units.
5. Turn on Display
6. Turn on Video Source
Product Exterior
Product Dimension (WxDxH) : 4.3” x 3.1” x 1.6” / 109 x 78.75 x 40.64 mm
Weight: 0.9 lbs / 0.4 kg
DOF4 Tx: Transmitter Module

PureLink by Dtrovision
7
DOF4 Rx: Receiver Module
EDID management on DOF4
Internal EDID DATA
- Select EDID data of your choice from the list below by adjusting MODE switch on the Transmitter
module.
* EDID list
0
External EDID
1
800x600 60Hz
2
1024x768 60Hz
3
1280x768 60Hz
4
1280x1024 60Hz
5
1360x768 60Hz
6
1366x768 60Hz
7
1400x1050 60Hz
8
1600x900 60Hz
9
1600x1200 60Hz
A
1680x1050 60Hz
B
1920x1200 60Hz
C
1080i 60Hz
D
1080p (2 CH)
E
1080p (Multi CH)
Saving external EDID DATA:
Connect display (monitor, TV, or projector) to the DOF transmitter. Set your rotary switch to “0”, then
press the EDID S/W button. Transmitter will read and save the EDID data on internal EEPROM.

PureLink by Dtrovision
8
Warranty
Manufacturer’s Warranty (3-Years)
PureLink warrants this DOF4 fiber optic extender to be free from defects in workmanship and
materials, under normal use and service, for a period of three (3) year from the date of
purchase from PureLink or its authorized resellers.
If the product does not operate as warranted during the applicable warranty period, PureLink
shall, at its option and expense, execute one of the following as necessary:
1. Repair the defective product or part
2. Deliver to customer and equivalent product or part to replace the defective item
3. Refund to customer the purchase price paid for the defective product
All products that are replaced become the property of PureLink. Replacement products may
be new or reconditioned. Repaired or replacement products or parts come with a 90-day
warranty or the remainder of the warranty period. Dtrovision shall not be responsible for any
software, firmware, information, or memory data loss of contained in, stored on, or integrated
with any products returned to Dtrovision for repair under warranty.
Customer Service
Any customer service inquiries can be submitted electronically through the Q&A form on our
website ( www.purelinkav.com ).
For immediate assistance please contact us at [phone] to reach our customer care or
tech support team.