PureLink Fiber Optic Extenders User manual

PM Series Fiber Optic Extenders
Owner’s Manual
PM Series Fiber Optic Standalone and Wall-plate type Extender
Dtrovision LLC
9A Bergen Turnpike
Little Ferry, NJ 07643
Tel: [phone]
Fax: [phone]
www.purelinkav.com
www.dtrovision.com
For Technical Support, contact us at
[e-mail]

PureLink by Dtrovision
2
TABLE OF CONTENTS
Chapter 1. Introduction
1.1 Safety Precautions--------------------------------------------------------------------------- 3
1.2 Product Introduction -------------------------------------------------------------------------- 4
1.3 Package Contents ----------------------------------------------------------------------------- 4
Chapter 2. Features and Specifications
2.1 Features ----------------------------------------------------------------------------------------- 5
2.2 Transmitter Specifications ------------------------------------------------------------------ 6
PM-FT101 --------------------------------------------------------------------------------------- 6
PM-FT102 --------------------------------------------------------------------------------------- 8
PM-FT103 --------------------------------------------------------------------------------------- 9
Transmitters Compatibility Chart ----------------------------------------------------------- 12
2.3 Receiver Specifications ---------------------------------------------------------------------- 13
PM-FR101 -------------------------------------------------------------------------------------- 13
PM-FR102 -------------------------------------------------------------------------------------- 14
PM-FR103 -------------------------------------------------------------------------------------- 16
Receivers Compatibility Chart ------------------------------------------------------------- 19
2.4 Operation and Reliability Specification --------------------------------------------------- 20
Chapter 3. Installation and Operating Instruction
3.1Installation --------------------------------------------------------------------------------------- 21
3.2Operating Instruction -------------------------------------------------------------------------- 21
3.3Cable Termination ----------------------------------------------------------------------------- 23
3.4Connector Pin Assignment ------------------------------------------------------------------ 24
Chapter 4. Additional Information
4.1 Warranty ------------------------------------------------------------------------------------------ 26
4.2 FCC/CE Statement --------------------------------------------------------------------------- 27

PureLink by Dtrovision
3
Chapter 1. Introduction
1.1 Safety Precautions
When using and installing Dtrovision PureLink product, adhere to the following basic safety
precautions.
•Read and understand all instructions before using and installing this product.
•The safety and operating instructions should be retained for future reference.
•Always use the correct external power supply (indicated on the product label) when
operating this unit.
•Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
•Mishandling of this product may lead to a fire or explosion hazard.
•Do not place any heavy objects or equipment on top of the product.
•Keep away from wet, magnetic, and flammable surfaces or substances.
•Air vents should be kept clean and unobstructed at all times.
•Any external impact may cause damage to the operation of this unit.
•Be sure this product is properly grounded (earthed) in order to prevent the risk of
electrical shock.
•Turn off and unplug power before adding or removing Input/Output Boards.
•Input/Output Boards may be damaged when they are replaced with power turned on.
•Use surge protectors and/or AC line conditioners when powering this product.
•Only use a fuse(s) with the correct fuse rating in your enclosure.
•Make sure the product is on or attached to a stable surface.
If you experience any malfunctioning of product or have any question as to operation
of the product, please contact our customer service center.
Dtrovision LLC
Tel: [phone]
Email: [e-mail]

PureLink by Dtrovision
4
1.2Product Introduction
Pure fiber optic cable for video, audio, and control signal
PM series Fiber Optic (2 LC) extension system is designed to transmit video (DVI, HDMI
or VGA), audio (Embedded or analog stereo audio), control (RS232/422 and IR) over a
pure LC to LC fiber optic cable for long distance up to 6,600ft. This optical connection
enables to minimize electrical noise and EMI free that is ideal for long distance extension
of high definition HDMI/DVI or VGAvideo signal, HDMI embedded audio or 3.5mm
stereo analog audio, and control signal.
1.3Package Contents
Please make sure all of the following items are included in the package:
1) One of PM-FT101, FT102, FT103 Transmitter Module or
2) One of PM-FR101, FR102, FR103 Receiver Module
3) 5pin Phoenix Connector for RS-232/422
4) DC 12V Power Supply Unit with a Power Cord

PureLink by Dtrovision
5
Chapter 2. Features and Specifications
2.1Features
▶ Transmitters directly compatible with PM Fiber Optic Input Board
PM Fiber Optic (2 LC) Transmitters can send signal directly to PM series Matrix
Router's Fiber Optic Input Board, eliminating the need of matching Receiver.
▶ Receivers directly compatible with PM Fiber Optic Output Board
PM Fiber Optic (2 LC) Receivers can receive signal directly from PM series Matrix
Router's Fiber Optic Output Board, eliminating the need of matching Transmitter.
▶ HDMI v1.4, 3D Support
Adopting latest HDMI version 1.4 enables to support 3D, 48-Bit Deep Color, 4K x 2K
resolution and 7.1 Channel Dolby TruHD & DTS MasterHD
▶ Auto-EDID (EDID Library, Emulation)
PureLink's EDID library and emulation features failsafe EDID capture & storage to
provide constant and continuous EDID for source devices.
▶ HDCP Compliant
▶ Various Transmitter and Receiver Choices
There are three different type of transmitters and three different type of receivers to
make today's sophisticated digitalAV environment simple and flexible.
▶ RF6 1RU Rack Mountable Version Available
PM-FT101, PM-FT102, PM-FR101, and PM-FR102 are also available in PureLink's
popular RF6 Rack Mountable Extension Center Modules.
▶ Analog Support (VGA and Component)
On PM-FT102 and PM-FT103 series, there are two video inputs; DVI/HDMI and VGA,
which are selectable via front panel button or serial command when it is connected PM
series Matrix Router. VGA port is designed to take component (YPbPr) signal with
appropriate adapters or cables.
▶ USB Firmware Update
▶ Long Distance Transmission up to 6,600ft (2,000 m)

PureLink by Dtrovision
6
▶ Plug-N-Play
▶ Resolutions up to WUXGA 1920x1200, HD 1080p @ 60Hz, and 4K2K
▶ Integrated Noise-cancellation and Error-correct Logic for both Input and Output
Ports to prevent any damage caused by Electrical Noise.
2.2Specifications
Transmitters :
PM-FT101 : Standalone type (Loop Through)
Input: HDMI + 3.5mm stereo audio (x1) + RS-232/422
Output: Fiber Optic (2 LC) and HDMI Loop-Through
6,600ft, Compatible with PM-FIS4 input board
Front Connection Ports:
Power S/W: Power On/Off switch
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
Firmware: USB firmware update port

PureLink by Dtrovision
7
Back Connection Ports:
HDMI/DVI In: HDMI/DVI input port
HDMI/DVI Out: HDMI/DVI Loop-thru output port
Audio In: Stereo audio input port
2 LC: Fiber Optic output port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port
Model Name PM-FT101 (HDMI version), PM-FT102-D (DVI version)
Input Signal
DVI / HDMI (TMDS)
3.5mm stereo audio
Output Signal Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))
DVI / HDMI (Loop-thru)
Extinction Ratio > 4db (after 6,600ft (2km) transmission)
Data Transmission
Speed 3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female (x 2)
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations DVI 1.0 , HDMI 1.4
HDCP Compliance Yes
Power Rating DC +12V, 4Watts Max
Dimension 6.3' x 4.4' x 1.7' (160 x 112 x 42 mm)
Weight 1.43 lbs (0.65 Kg)

PureLink by Dtrovision
8
PM-FT102 : Standalone type (2x1 switch)
Input: Selectable HDMI/DVI or VGA + 3.5mm stereo audio (x2) +
RS-232/422
Output: Fiber Optic (2 LC)
6,600ft, Compatible with PM-FIS4 input board
Front Connection Ports:
Power S/W: Power On/Off switch
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
VGA LED: VGA (or component) signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
Firmware: USB firmware update port
Back Connection Ports:
HDMI/DVI In: HDMI/DVI input port
VGA In: VGA (or component) input port
Audio In: Stereo audio input port
2 LC: Fiber Optic output port
RS-232/422: RS-232/422 communication port
DC In: DC 12V Power port

PureLink by Dtrovision
9
Model Name PM-FT102 (HDMI version), PM-FT102-D (DVI version)
Input Signal
DVI / HDMI (TMDS), VGA (supports YPbPr component)
3.5mm stereo audio
Output Signal Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))
Extinction Ratio > 4db (after 6,600ft (2km) transmission)
Data Transmission
Speed 3.4 Gbps/ch, Total 10.2 Gbps Max
Supporting Display
Resolutions
PC: VGA ~ WUXGA
(up to 1920 x 1200 @60Hz)
HDTV: 480i ~ 1080p, 2K4K
Max. Distance Single Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 6,600 ft (2km)
Multi Mode Fiber: 1920 x 1200 @ 60Hz or at 1080p : 1,650 ft (500m)
Connector Type
DVI 29P/HDMI 19P Female (x 2)
3.5mm Stereo Jack
2 LC Optical Connector
3P /3.5MM Terminal Block (for Power)
5P /3.5MM Terminal Block (for RS-232/422)
Mini USB (for firmware update)
Conformations DVI 1.0 , HDMI 1.4
HDCP Compliance Yes
Power Rating DC +12V, 4Watts Max
Dimension 6.3' x 4.4' x 1.7' (160 x 112 x 42 mm)
Weight 1.43 lbs (0.65 Kg)
PM-FT103 : Wall plate type (2x1 switch), 2 Gang Decora style, white finish.
Input: Selectable HDMI or VGA + 3.5mm stereo audio (x1) + RS-232
Output: Fiber Optic (2 LC)
6,600ft, Compatible with PM-FIS4 input board

PureLink by Dtrovision
10
Front Connection Ports:
Power LED: Power status indicator
Status LED: Video signal presence indicator
HDMI LED: HDMI signal indicator
VGA LED: VGA (or component) signal indicator
EDID save S/W: EDID save button
EDID select S/W: EDID library function selection rotary switch
HDMI/DVI In: HDMI/DVI input port
VGA In: VGA (or component) input port
Audio In: Stereo audio input port
RS-232: RS-232 communication port
Back Connection Ports:
2 LC: Fiber Optic Output Port
DC In: DC 12V Power port
Model Name PM-FT103
Input Signal
DVI / HDMI (TMDS), VGA (supports YPbPr component)
3.5mm stereo audio
Output Signal Fiber Optical Output ( > -10dbm (after 6,600ft (2km) transmission))