Purell ES4 Operating manual

Built on over 70 years of dispensing innovation, new PURELL EShand hygiene systems
are as durable and reliable as they are beautiful. With PURELL®products, it’s easy for
customers to see how much you care about cleanliness, health and well-being.
• AT-A-GLANCE™ refill design makes it easy to see when refills need to
be changed
• Each new refill refreshes the look of the dispenser
• Distinct PURELL brand design - engineered to fit everywhere
• Refills are recyclable
• SANITARY SEALED™ refills help reduce potential for contamination
• LOCK OR NOT™ Technology - can convert to locking system
• Fully ADA compliant
PURELL®ES4 Dispensing System
Maintenance Guide

Lock the dispenser by aligning the key with
the keyhole on the top of the dispenser and
pushing down until a click is heard.
Note: Once locked, dispenser will always
require key to open, until LOCK-OR-NOT
"auto-lock" functionality is manually
turned off.
Check for a successful lock by pressing the
release buttons on the sides of the dispenser to
see if the front cover releases and slides down.
Note: Once locked, the dispenser will remain in
the locked state.To open a locked dispenser,
insert the key into the keyhole and press down
until the front cover is released.
2
To manually remove the "auto-lock" function,
unlock dispenser using key, remove rell, and
take off white back plate of dispenser.
3
1LOCK OR NOT™
Technology Key
(not included)
Open dispenser by pressing release buttons
on the sides of the dispenser & slide the front
cover down.
Refill Replenishment
Push the green release button and remove
empty rell.
21
Close the dispenser cover.
5
Place hand in middle of bar and push.
Product will dispense as bar is depressed.
6
Remove the rell cap and push the new rell
into dispenser until it clicks in place.
4
Refill Disposal/Recycling
Insert a at blade screwdriver into the slots
on the rell collar and twist to separate the
collar from the rell.
Unscrew the pump from the bottle and
discard. Dispose/recycle the PET bottle and
collar.
1
Match label on rell
with label on dispenser.
3
Locking the dispenser with LOCK OR NOT™ Technology
SOAP
ES4
SOAP
ES4
SOAP
ES4
To manually unlock, push the locking
mechanism toward the top of the dispenser.
Note: This will leave the dispenser in an
unlocked state until key is inserted to re-lock
the system.
Dispenser is unlocked
4
2
GOJO Industries, Inc.
One GOJO Plaza, Suite 500
P.O. Box 991 • Akron, OH 44309-0991 • USA
Tel: [phone] • Toll-free: 1-800-321-9647
Fax: 1-800-FAX-GOJO
2019. GOJO Industries, Inc. All rights reserved.
To learn more, visit
www.PURELLSOLUTION.com
Care & Cleaning
Instructions
Always remove the refill
before cleaning to avoid
accidental actuation of soap.
Routinely wipe dispensers
with a soft, moist cloth.
Pay special attention to
cleaning under the dispenser
or push bar, as product may
build up in this area.
Do not use abrasive cleaners
or chemical solvents* to
clean. Use of hospital-
approved disinfectant
and other typical cleaning
solutions is acceptable.
1
2
3
4
If you have any questions, please
reach out to Customer Service at
1-800-321-9647
PURELL®ES Dispenser Systems
available for soap and sanitizer.
HCE-LIT-ES4MAINT
26684 (7/2019)
* Abrasive cleaners will scratch
the plastic and labeling.
Strong chemical solvents can
dull the plastic.