PurSteam SY105 User manual

1
STEAM
MOP
MODEL: SY105
ALL PURPOSE
MANUAL
WITH LIFTING
HANDLE

2 3
At PurSteam, we set out to revolutionize the way
people clean. We harnessed the power of steam
to make everyday home cleaning tasks easier,
without the use of harmful chemicals.
We believe in a more natural approach. Our
steamers use the convenience of heated water
to clean and sterilize surfaces – a must for homes
with children and pets.
We are more than just a brand specializing in
steam cleaning. We take pride in an unwavering
commitment to customer satisfaction. We’re
dedicated to simplifying your daily routines.
Get ready to redefine clean,
one steam at a time!
IMPORTANT SAFETY INSTRUCTIONS 4
DESCRIPTION OF PARTS 6
INSTRUCTIONS FOR USE 7
HOW TO ASSEMBLE AND USE 7
FOLDING & STORAGE 11
CLEANING AND MAINTENANCE 12
SPECIFICATION 13
TROUBLESHOOTING 14
WARRANTY 15
CONTACT US 15
TABLE OF CONTENTS
MANUAL
CLEAN WITH THE POWER OF STEAM
STEAM
MOP
CONGRATULATIONS

4 5
READ ALL INSTRUCTIONS BEFORE
USING THIS STEAM CLEANER
When using an electric appliance,
basic precautions should always be
followed, including the following:
CAUTION! To reduce the risk of
fire, electric shock, or injury:
• Connect to properly grounded outlets
only.
• Check that the main voltage corre-
sponds to the voltage indicated on
the rating label, see specifications
below: AC 120 V, 60 Hz, 1500 W
• Use for household use only. Not in-
tended for commercial purposes.
• Do not use outdoors.
• Do not leave the Steam Mop unat-
tended while connected to the main
power supply. Do not leave the appli-
ance connected to an electrical outlet
when not in use.
• Keep out of reach of children. This
product is not intended to be used
as a toy.
• Do not direct steam at people, ani-
mals, electrical appliances, or electri-
cal outlets.
• Do not immerse the Steam Mop into
water or other liquids.
• Do not use with damaged cord or plug.
• Do not pull or carry by cord, use cord
as a handle, close a door on the cord,
or pull cord around sharp edges or
comers.
• Keep the Power Cord away from heat
sources and sharp edges.
• Never force the plug into an outlet.
• Do not use extension cords or outlets
with inadequate current carrying ca-
pacity.
• Unplug aer use. Do not unplug by
pulling on cord. To unplug, grasp the
plug, not the cord.
• Do not handle plug or Steam Mop
with wet hands.
• Always wear suitable shoes when us-
ing this appliance and when changing
accessories; do not wear slippers or
open-toed footwear.
• Do not insert any objects into openings.
Do not use with any opening blocked.
• Do not use without Microfiber Cloth
in place. Do not use without water in
the Water Tank.
• Use extra care when using on stairs.
• Store your Steam Mop indoors in
a cool, dry area.
• Keep your work area well lighted.
• Distilled or demineralized water
is recommended in place of tap
water. Do not use chemicals in the
water tank.
• of your PowerFresh® Pet Steam Mop.
• Never put cleaning detergents into
the Steam Mop. This will make the
operation unsafe and damage the unit.
• Never block the steam openings of
the product or place it on a so sur-
face, where the steam openings may
be blocked. Keep the steam openings
free of lint, hair, and the like.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
• Use only as described in this manual.
Use only manufacturer’s recommend-
ed accessories.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been give supervision or instruction
concerning use of the appliance by
a person responsible for their safety.
• If the supply cord or plug is damaged,
please contact PurSteam Customer
Service.
• Do not use this appliance on leather,
synthetic fabrics, velvet, or other del-
icate, steam sensitive materials.
• Do not use the appliance on any un-
sealed hard floor surfaces.
• Do not use the appliance if it has been
dropped or damaged in any way.
• This appliance gets very hot during
use, exercise extreme caution.
• Never leave the Steam Mop standing
in an upright position, on a floor area
while the unit is ON for longer than
15 seconds. Leaving the mop in this
position may cause a build-up of a
pale residue on the surface.
The following information is provided
for service by a qualified electrician
only:
Rated voltage:
AC 120 V, 60 Hz, 1500 W
Use only the proper type outlet when
plugging in the appliance.
Danger of scalding. Please use
caution when using the Steam Mop.
WARNING!

6 7
DESCRIPTION OF PARTS
Handle
Power Buon
Unlock Buons
Steam Control
Knob
Water Tank
Cover
Liing Handle
Top Cord Hook
Water Tank
Power Cord
Boom
Cord Hook
LED Power
Indicator
Mop Head
Carpet Glider
Microfiber Cloth
for cleaning hard floors
Measuring
Cup
ACCESSORIES The Steam Mop is designed to thoroughly clean floor surfaces, such as marble,
ceramic, stone, linoleum, sealed hardwood floors and parquet.
INSTRUCTIONS FOR USE
HOW TO ASSEMBLE AND USE
On surfaces that have been treated with wax, the wax may be removed
by the heat and steam action. Do not use on unsealed wood floors or let
unit stand on any wood floor for an extended period of time. This could
cause the wood grain to rise. When using on vinyl, linoleum or any other
heat sensitive floors, use extra caution. Too much heat can melt down
glue in the flooring. It is therefore recommended that a sample cleansing
be carried out on an isolated area of the floor. It is also recommended
that you check the use and care instructions of the surface from the floor
manufacturer to ensure suitability to steam cleaning.
Never force the Steam Mop Body onto the Mop Head, as this could
potentially damage the Steam Mop. Always aach the Mop Head
using both hands, ensuring it locks into place correctly. The Microfiber
Cloth must be installed correctly before use.
WARNING!
WARNING!
Residents in areas with hard water, should use distilled water or demineralized
for beer performance.
Aach Mop Head
Slide the Steam
Mop Body onto the
Mop Head. You will
hear aclick.
1
click!
FRONT VIEW
SIDE VIEW

8 9
Using the Water Tank
Open the Water Tank Cap and fill
the Tank with 18.6 fl oz (550 ml)
water using the Measuring Cup.
Using the Accessories
NOTE: Water
Tank capacity:
18.6 fl oz (550 ml)
IMPORTANT NOTE: Turn OFF the
Steamer when filling it with water.
Using the Carpet Glider
Place the Microfiber Cloth first,
then put the mop on the Carpet
Glider to slide on the carpet.
23
Never place descaling, aromatic,
alcoholic or detergent products
in the Steam Mop Tank, this will
cause damage to the appliance
and void your warranty.
WARNING!
Unfold the Handle (if folded)
Li the collapsible Handle up until the Unlock Buons click into place on
the Steam Mop Body.
Unwrap the Power Cord completely and plug into a grounded outlet.
4
5
Using the Microfiber Cloth on Hard Floors
Use the Velcro strips on the Microfiber Cloth
to aach it to the Mop Head.
TIP: Use of
distilled water or
demineralized is
recommended to
prolong the life
of your hard
floor cleaner.

10 11
Steaming with the Steam Mop
Turn ON the Power Buon. The LED Power Indicator will turn green. Steam
will take about 25–30 seconds to begin. You will hear the boiler before the
steam has formed.
To sanitize an area of your floor, leave the Steam Mop over area for a
minimum of 8 seconds, but no longer than 15 seconds. Leaving the Steam
mop in a stationary position for a longer period than recommended may
cause the build up of a pale residue.
The Steam Mop should only be used in the house.
The Microfiber Cloth may be very hot. Not for space heating purpose.
NEVER run the Steam Mop without water. NEVER direct steam at any
person or animal. Use the Steam Mop on sealed hard floor only.
Extremely hot. Do not place hands or any body part in the steam. While the
Steam Mop is plugged in, do not direct the steam head at any body part.
CAUTION!
WARNING!
WARNING!
CAUTION!
6
7
8
9
NOTE: We recommend
you sweep or vacuum prior
to using the Steam Mop.
Never store the Steam Mop without allowing the appliance to cool, removing
the dirty Microfiber Cloth, and draining any water in the Tank.
Turn OFF the Power Buon. Remove the plug from the outlet and allow the
unit to cool.
Li out and drain the Tank. Store the Tank aached to the Steam Mop.
If preferred, press both Unlock Buons into the body then fold the Handle
back, as shown.
Remove all accessories aer use. This includes taking off the dirty
Microfiber Cloth from the Mop Head. (See Page 12 for cleaning
instructions so it is ready for your next use.)
Replace the Carpet Glider accessory or store it nearby.
If Handle is up, wrap the Power Cord around the Top and Boom Cord
Wraps. If Handle is folded down, wrap the Power Cord around the Body
and Handle.
Use the Liing Handle on your Steam Mop to pick the unit up and store it
upright in a dry area or hang it with the storage hook.
FOLDING & STORAGE
A full Tank of water will produce approximately 20–30 minutes of steam.
The pump will make noises when the Water Tank is empty. Please stop
steaming and refill the Tank (See page 8).
2
3
4
5
6
7
NOTE: Do not operate another
high waage appliance on the
same circuit to avoid an overload.
1
Use the Steam Control Knob to adjust the steam flow rate from high to low.
• To release the steam, press the Power Buon on the Handle.
The unit will begin to steam under the Mop Head.
• To stop releasing steam, press the Power Buon again.
Slowly pass over the surfaces to be cleaned.
Position the steamer over each area for about 8 seconds.

12 13
CLEANING AND MAINTENANCE
Ensure the appliance is disconnected from the outlet and has cooled
down before cleaning. Drain any remaining water from the base every
time you finish with steaming.
CAUTION!
CLEANING THE MICROFIBER CLOTHS
• Always use a mild detergent and avoid fabric soeners.
CLEANING THE STEAM MOP AND ACCESSORIES
• Wipe the steamer with a so cloth. The Steam Mop should only be used
with its own specially developed Microfiber Cloths and Filter (spare Cloth
pads and Filters are available from your retailer).
• Clean the Glider and Cup accessories in warm, soapy water and leave them
to air dry.
SPECIFICATION
PRODUCT MODEL SY105
RATED VOLTAGE 120 V
RATED FREQUENCY 60 HZ
OUTPUT POWER 1500 W
WATER TANK CAPACITY 18.6 fl oz (550 ml)
STEAM TEMPERATURE 194~212°F (90~100°C)
PREHEATING TIME 20–25 seconds
STEAM SPEED 15–25 ml/min
POWER CORD LENGTH 28  (8.5 m)
NOTE: Never use bleach or fabric soener.
WARNING!
Never put descaling, alcoholic, or detergent products into the steam
cleaner, as this may damage it or make it unsafe for use.
WARNING!
If you live in an area with hard water (high dissolved minerals), it will produce
lime scale and impact product performance. We recommend the use of
distilled water or demineralized to improve the Steam Mop’s longevity.

14 15
This product is warranted to be free from defects in material and workmanship
under normal use and service for one year from the date of the original purchase
with the receipt. The manufacturer’s obligation shall be limited to repairing or
replacing any part of the product that is defective. Such warranty shall not apply
to damages resulting from accidents, abuse, or misuse.
WARRANTY
CONTACT US
[email protected]
WWW.PURSTEAM.COM
PROBLEM POSSIBLE CAUSE SOLUTION
Pale residue
le on
the floor
Can be caused
by leaving the
Steam Mop in
the same position
for too long.
Can be removed with
household white vinegar or
a decalcifying product.
Alternatively, reheat the
area for 1 minute. Residue
should be removed.
CAUTION!
Do not overheat area.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Unit will
not turn ON
or the LED
Indicator
is not on
The LED will not
illuminate until
the Steam Mop
is turned on.
Ensure the Power Buon on
the Handle is turned ON aer
you plug in the Steam Mop.
There is no power
to the Steam Mop.
Ensure the Steam Mop is
plugged in and turned ON.
The circuit breaker
is not operational.
Ensure the circuit breaker is
operational. Try operating
the Steam Mop from
another power outlet.
Reduced
steam or
no steam
Water Tank is empty. Fill Water Tank.
Steam nozzle
at boom of
Steam Mop Body
is blocked.
Remove Mop Head and
clean the nozzle.
The steam buon
is not pressed.
Press the steam buon. It needs
20–25 seconds for preheating
aer the mop is turned ON
before the steam is ready.
Steam Control
Knob is set to MIN.
Turn the Steam Control
Knob clockwise to MAX.
There is no power
to the Steam Mop.
Ensure the Steam Mop
is plugged in and ensure
the Power Buon on the
Handle is turned ON.
Ensure the appliance is disconnected from the outlet and has cooled
down before troubleshooting.
CAUTION!
STEAM MOPMODEL: SY105

16
[email protected]
WWW.PURSTEAM.COM