PXM PX268 User manual

Manual
PiXiMo 12350
Driver LED
12x350 mA
PX268
R

Contents
3
3
4
5
5
6
7
7
8
1. General description.............................................................................................
2. Safety conditions.................................................................................................
3. Connections and control elements description....................................................
4. DMX address settings.........................................................................................
4.1 Smooth function setting......................................................................
5. Connection scheme.............................................................................................
6. Dimensions .........................................................................................................
7. Technical Data ....................................................................................................
8. Declaration of Conformity....................................................................................
Manufacturer reserves the right to make modifications in order to improve device
operation.
PXM Marek Żupnik Sp. komadytowa
ul. Przemysłowa 12
30-701 Kraków, Poland
tel.: [phone]
fax: [phone]
E-mail: [email protected]
Internet: www.pxm.pl
Ver. 1.1

1
The PiXiMo 12350 driver is designed to control LEDs, it is ideal for use in simple systems. Built-in
receiver allows to control of 12 channels directly with DMX protocol. To each of the 12 channels
you can connect up to three Power LEDs.
The PX268 can only be controlled with DMX. Built-in DIP switch allows you to set the starting
address of the first channel. The rest of DMX channels are assigned the following after each other
higher addresses. The value of this address is set in binary code. In addition, the last section of
the switch allows you to activate the Smooth option. This feature smooths the transition between
successive control signal values for fluent changes of color in the connected lamps.
The driver is produced in DIN rail compatible casing - 6 standard DIN modules wide.
1. GENERAL DESCRIPTION
2. SAFETY CONDITIONS
PX268 LED Driver 12 x 350 mA is a device powered with safe voltage 12; however, during its
installation and use the following rules must be strictly observed:
1. The device may only be connected to 12V DC with current-carrying capacity compatible with
technical data.
2. All the conductors should be protected against mechanical and thermal damage.
3. In the event of damaging any conductor, it should be replaced with a conductor of the same
technical data.
4. Use only shielded cables to connect the DMX signal.
5. All repairs and connections of outputs or DMX signal can only be made with cut off power
supply.
6. PX268 should be strictly protected against contact with water and other liquids.
7. All sudden shocks, particularly dropping, should be avoided.
8. The device cannot be turned on in places with humidity exceeding 90%.
9. The device cannot be used in places with temperature lower than 2°C or higher than 40°C.
10. Clean with damp duster only.

4
3. CONNECTIONS AND CONTROL ELEMENTS DESCRIPTION
DMX-512
input
Passive
type
DMX-512
output
Power supply
Control
outputs
Following control
outputs
PiXiMo
12350
OUT2
OUT1 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9

5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
70
71
72
73
74
100
101
102
103
104
105
249
250
251
2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1
2 3 4 5 6 7 8 9
ON DIP
1 2 3 4 5 6 7 8 9
ON DIP
1
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
ON
ON
ON
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
1
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
ON
ON
DIP
DIP
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
5
5
5
5
5
6
6
6
6
6
7
7
7
7
7
8
8
8
8
8
9
9
9
9
9
ON
ON
ON
ON
ON
DIP
DIP
DIP
DIP
DIP
1
1
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
ON
ON
ON
DIP
DIP
DIP
1
1
1
4. DMX ADDRESS SETTING
The PX268 allows to set an address on a single DMX channel. The start address is set in binary
code using a switch-type "DIP switch". Below You will find some sample settings of the start
address - next to the address number is picture of "DIP switch" set up.
First 9 switches are responsible for setting the start DMX address, the last (10th) "DIP switch"
activates "Smooth" function.
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
2 3 4 5 6 7 8 9
ON DIP
1 10
Activating of the Smooth function allows to flatten steps between successive control signal
values and ensures fluent changes e.g. of colour in connected lamps. This feature prevents
common effects of light flickering during brightness or colour changes in lighting installations.
Active "smooth” and starting DMX
address on the first channel.
function
4.1. SMOOTH FUNCTION SETTINGS

6
The PX268 must be connected to the DMX line in a series, without branching on the control cable.
This means that the DMX IN pins in PX268 must be connected with the control cable.
From the DMX OUT pins it must be led to the next DMX receivers.
CORRECT WRONG
DMX-512 Input DMX-512 Output DMX cable
12V DC
power supply
e.g. monochromatic PX229 lamps
...... ......
......
......
......
......
...... ......
LN
DC OK
...
...
1 2 3 4 5 6
PX015
1 2 3 4 5 6 Chaser Scene
Club 6p
90
% 100
80
70
60
50
40
30
20
10
0
100 %
90
80
70
60
50
40
30
20
10
0
Master
Music Speed
e.g. monochromatic PX229 lamps
DMX controller
5. CONNECTION SCHEME
Due to use of passive-type DMX in the PX268 driver, a 120 Ohm terminator is needed at the
end of DMX line. Such a solution allows to connect up to 32 of the PX268 drivers to a DMX
controller (serial connection).
The connections have to be made with wires of appropriate gauge. The proper connection
lowers the risk of damaging the driver and improves its reliability. For DMX signal connection
use the shielded conductors only.
Sample connection scheme
PiXiMo
12350
OUT2
OUT1 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9
120 Ohm
terminator

512
12V DC
4,2 A
0,8 W
12
16 bit
350mA / channel
terminal blocks
0,29 kg
width: 105 mm (6 DIN rail modules)
height: 86 mm
depth: 60 mm
DMX output channels:
Power supply:
Max. current consumption:
Power consumption without load:
Number of output channels:
Control accuracy:
Output load:
Output sockets:
Weight:
Dimensions:
7. TECHNICAL DATA
7
6. DIMENSIONS
105 mm
86 mm
60 mm
PiXiMo
12350
OUT2
OUT1 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9

8
PXM Marek Żupnik spółka komandytowa
ul. Przemysłowa 12
30-701 Kraków, Poland
PiXiMo 12350
PX268
PN-EN 61000-4-2:2011
PN-EN 61000-6-1:2008
PN-EN 61000-6-3:2008
mgr inż. Marek Żupnik
The DMX-512 output must be shielded and the shielding
must be connected to the ground responding to the DMX
connectors.
(M.Sc. Eng.)
Name of producer:
Manufacturer’s address:
We declare that our product:
Product name:
Product code:
complies with the following standards:
Additional information:
EMC:
Kraków, 15.04.2013
DECLARATION OF CONFORMITY
according to guide lines 2004/108/EC
stage and theatre consoles digital dimmers dmx systems architectural lighting controllers led lighting
tel: [phone]
fax: [phone]
e-mail: [email protected]
http://www.pxm.pl
ul. Przemysłowa 12
30-701 Kraków, Poland