Pyle PWMA1080IBT User manual

WirelessBTPortablePASpeakerSystem
PWMA1080IBT
Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]om
Built-in Rechargeable Battery, iPod Dock, 800 Watt

We recommend that you read this manual carefully so that you can fully take
advantage of the advanced and convenient functions of the Portable PA Speaker
and Microphone System. We also recommend that you keep this manual in a
safe and handy place for future reference.
CAUTION
WARNING! DON'T OPEN THE MACHINE TO AVOID ELECTRIC SHOCK, PLEASE ASK
HELP FROM PROFESSIONAL TECHNICIANS.
SAFETY INSTRUCTION
1. Read this manual carefully before using. Retain for future reference.
2. All warnings on the speaker and in the operating instructions should be adhered to.
3. Do not use this apparatus near water.
4. Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including ampliers) that produce heat.
Do not install the speaker in an airtight location.
5. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
6. Switch OFF and unplug then use a soft cloth to clean the exterior of the unit if it
becomes dirty. If necessary, use a damp cloth that has been wrung out well to
wipe it.
7. Unplug this apparatus during lightning storms or when unused for long periods of
time.
8. Keep foreign objects and liquid from entering the unit to avoid a short circuit, re
and electrical accidents.
9. Place the speaker in a dry location.
10. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture , does not operate normally, or
has been dropped.
SYSTEM FUNCTION FIGURE
1. Wireless Mic/MIC 1 Volume Control
2. MIC 2 Volume Control
3. Guitar Volume Control
4. Audio Volume Control
5. lpod Dock
6. Ipod/MP3 Volume Control
7. Echo Control
8. Treble Control
9. Bass Control
10. Metal Corner
11. Wireless BT ON/OFF switch
12. Wireless BT indicator light
13. Audio Output Jack
14. Ipod/MP3 Input Jack
15. Audio Input Iack
www.PyleUSA.com2www.PyleUSA.com 3
16. Guitar Input Jack
17. Mid Speaker
18. Vent Hole
19. Unit Fixed Stand
20. Vent Hole
21. Woofer Speaker
22. Tweeter
23. MIC 2 Input Jack
24. MIC 1 Input Jack
25. Power Switch
26. Power Indicator
27. Low Voltage Indicator
28. Charge Indicator
29. Wireless Mic RF Indicator

www.PyleUSA.com4www.PyleUSA.com 5
SYSTEM FUNCTION FIGURE
30. Trailer Handle
31. Heating Pane
32. Handle
33. Audio Out
34. Voltage Selector Switch
35. AC Fuse/Battery Fuse
36. Power line(-115V /230V)
37. External DC Input Jack
38. 2 PIN Power Socket
INSTRUCTIONS
1. Conrm the power
AC Power: Before operation, please conrm the voltage is same as the specied
marked on the label. If not, the unit will be damaged.
Built-in Rechargeable Battery: Plug-in the AC power when the rechargeable
battery voltage is enough but use the battery directly. When the Low Voltage
indicator turns yellow, it indicates the low battery, please charge it in time. When
the Low Voltage indicator turns OFF, it indicates the voltage is standard now.
If the unit will not be used for a long time, please charge the rechargeable battery
every 2 months, 8-10 hours for each time.
2. Operation Instructions
• Plug the power cable into the socket and connect it with this amplier system.
• Switch ON the amplier. the Power Indicator comes red.
• During charging, RECHARGE indicator turns red, when the indicator is ashing,
that means battery is almost full and turns OFF when fully charged.
• During charging, you can play music at the same time, the RECHARGE indicator
will ash with the current comsuption indicating the speed of charge. Charge time
is in direct proportion to the volume of music. When the battery is full, RECHARGE
indicator will stop ashing and turns o.
• Put two AA 1.5V battery into handheld microphone (bodypack transmitter), push
the Power Switch to the middle, the Power Indicator will ash once, RF Indicator
turns green.
• Push the handheld microphone Power Switch (bodypack transmitter) to ON position,
your sound can be heard from amplier when speaking.
Adjust the Volume Control/Echo Control/Treble Control/Bass Control to proper
position to avoid feedback.
• If the microphone Power Indicator (bodypack transmitter) turns on at all times,
it indicates the low battery, please replace the battery.
• Connect relative guitar cable with Guitar Input Jack on this system to play music.
39. Rechargeable Battery Cover
40. Warning label
41. 7AH/12V Rechargeable Battery
42. Trailer Truckle
43. MicHead
44. Handheld Mic RF Indicator
45. Handheld Mic Power Switch
46. Handheld Mic Battery Housing

www.PyleUSA.com6www.PyleUSA.com 7
3. Wired Microphone
• Two way wired microphone input jacks are supplied for two people to use
simultaneously.
• Plug Wired microphones into the jacks separately. Adjust Echo Control to get
better sound.
• Adjust the volume of each microphone to make sure the sound is satisfactory.
When you turn on the unit, be sure ECHO control is set to low or there will cause
sound distortion
4. Wireless BT Playback
You can connect your Wireless BT phone or other device to the PA speaker.
1. Turn ON the unit.
2. Press the ON/OFF switch on front panel to turn ON Wireless BT, indicator light is lit.
4. Use your Wireless BT phone or other device to search for the Wireless BT name
“PYLE SPEAKER”.
5. Select the “PYLE SPEAKER”Wireless BT name and wait for the device to pair
automatically.
6. You do not need code and get connected with unit.
7. Once paired you can play music from your Wireless BT device.
8. You can use the VOLUME/BASS/TREBLE to adjust the sound level for Wireless BT,
also you can adjust the Wireless BT music sound through your own phone or other
device.
NOTES:
Check the volume controller both on the unit and on your phone or other device
if there is no sound through the PA speaker during Wireless BT.
What's in the Box:
• Portable PA Speaker
• 1/4'' to Aux (3.5mm) Audio Cable + Adapter
• Battery Terminal Alligator Clamp Cables
• RCA Connection Cable
• Power Cable
System Features:
• Rugged & Compact Public Address Sound System
• Built-in Rechargeable Battery & 30-Pin iPod Dock Connector
• (2) 1/4'' Microphone Inputs + (3) 1/4'' Guitar/Instrument Inputs
• Ability to Connect & Stream Audio From External Devices
• Sound System: 10'' Subwoofer, 4'' Mid-Range + 4'' Tweeter
• Connect up to (3) Mics Simultaneously for a Karaoke Party
• Ported Enclosure for Increased Bass Response
• Independent Channel Volume Controls
• Audio Conguration: Echo, Bass and Treble Controls
• Telescoping Handle & Caster Wheels
• 35mm Speaker Stand Mount
• LED Indicator Lights
• External 12V Power DC Input Connector
• Perfect for Karaoke, Public Events, Crowd Control, etc.
Wireless BT Connectivity:
• Built-in Wireless BT Music Streaming
• Works with All of Your Favorite Devices
(iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.)
• Wireless BT Network Name: Pyle Speaker
• Wireless BT Version: 3.0
• Wireless BT Range: 100 Ft.
Technical Specs:
• Max Power Output: 800 Watt
• RMS Power Output: 400 Watt
• VHF Band Signal System Transmission
• System Battery Life: Approx. 8 Hours
• Average Charging Time: 8 - 10 Hours
• SPL: 94dB (1W/M)
• T.H.D.: <1%
• Power Supply: 120/220 Voltage Switchable
• Dimensions (L x W x H): 12.2'' x 10.2'' x 22.3'' -inches