PZRacing HRC-Tronic HO601 User manual

HRC-Tronic HO601
User Manual - v1.1 – 26/07/22
Puoi trovare l’ulti a versione del anuale, anuali applicativi, video tutorial e anuali in altre lingue, cliccando sul
link di seguito o scannerizzando il QR code a lato
You can find the latest version of the manual, application notes, video tutorial and manuals in other languages,
clicking on the link below or scanning the QR code on the side
http s ://pzracing.it/ download /
HO600 is co patible ONLY with HRC wiring loo
Installation
Fit the HRC-Tronic to the LOGGER connector on the bac of the bi e, please refers to the images below.
GPS receiver installation
N.B: do not place ca eras or other sources of electro agnetic interference near the receiver to avoid the GPS signal being
disturbed
Place the receiver module with the writing facing upwards and in a horizontal position with a clear and unobstructed view of the s y, it is
reco ended to place it on the tail of the otorbike.
The tank and the lateral air intakes of the otorcycle are highly not reco ended as the GPS receiver would be co pletely
covered by the chest and head of the rider and also during a turn the GPS receiver would be co pletely obscured by the otorcycle
itself.
Fix the entire length of the sensor cable, ma e sure that the cable is not under tension when using the device.
Usage
N.B: to be able to reveal the lap ti es you ust activate the lap ti er on the dash, refers to otorcycle's instruction anual.
Start session
The receiver wor s fully automatically, turns on when the vehicle is turned on, hoo s up to the satellites and loads the correct trac automatically, then
after the vehicle has started it will start showing the lap time on the motorcycle dashboard and memorizing the data if the function has been activated.
Below is the legend of the product status via the receiver LED:
- Solid: Wi-Fi on, GPS receiver not ready. The signal which is being received is not strong enough to locate the position. If a long period of time has
passed or if you have travelled several ilometres from the place you last switched on the device, you have to wait up to 4-5 minutes to receive a signal;
otherwise one minute is necessary to locate the position. If the led does not change status, position the receiver in a less restricted area because it
couldn't receive a good signal.
- Slow blink (1S off, 1S on): Wi-Fi on, GPS receiver ready. You can start your session.
- Fast blink (400 S off, 100 S on): Wi-Fi off, motorbi e moving. After the bi e has started and has reached 30Km/h for 5 seconds, the Wi-Fi is
turned off and the receiver will be ready to show the lap time on the dashboard.
N.B: if your circuit is not in e ory send an e ail to [email protected] with the na e and location of the circuit, we will send you a
fir ware update with your track
Wi-Fi
The GPS receiver is equipped with an integrated Wi-Fi
module that will be used for data download and settings
related to storage. Wi-Fi turns on when the product is
turned on and turns off when the motorcycle exceeds
30Km/h, to reactivate the Wi-Fi it will be necessary to turn
off and on the GPS receiver.
PZRacing Via de Gasperi 5 – 61032 Fano (PU) Italy - Tel: [phone] – Email: [email protected]

The default data for the Wi-Fi networ are the following:
Networ name: PZRacing S600-USER 1
Password: 12345678
From the software, in the Networ tab, it is possible to change the last part of the networ name (USER 1) and the password. Once modified it will be
necessary to close the RacePro program, turn off and on the GPS receiver.
Setting
In the Info tab you can set the GPS receiver:
Time Fuse: time fuse setting
Memorization: data recording activation (default: yes)
Directory: selection of the destination folder. In case you have not
selected any folder the software will as for it before downloading.
Driver Name: name of the driver
Vehicle name: name of the vehicle
Filter: filter set for GPS speed
Unit: GPS speed unit set (default Km/h)
Chart (min/max): minimum and maximum chart value for GPS speed
Auto Scale (up/down): auto scale for minimum and maximum chart
value for GPS speed
Download
In the Info tab you can also execute the commands for downloading data and deleting the memory. The download speed of the product is approximately
1 minute for each hour of recording. We remind you that the memory can hold up to 6 hours of recording, so the maximum download duration is 6
minutes.
Download Last Session: download the last session recorded
Download All Sessions: download on the entire memory
Clear Memory: delete the complete memory. This operation ta es about 30 seconds, do not turn off the receiver before the end of the operation.
Satellites
In the Satellites tab it will be possible to view the status of the satellites,
chec ing the strength of the received signal (in Db) for each satellite
acquired by the GPS receiver.
For a good reception the signal must be higher than 40Db (red line),
the lin ed satellites are colored BLUE while those in RED are the
satellites visible by the receiver but not currently used for the position
triangulation.
Test
In the Test tab you can run a short test procedure and chec the date of
first start-up of the product.
PZRacing Via de Gasperi 5 – 61032 Fano (PU) Italy - Tel: [phone] – Email: [email protected]