Q-See QQTT1199DD332288SSCC User manual

Q
QU UI IC CK K I IN NS ST TA AL LL LA AT TI IO ON N G GU UI ID DE E F FO OR R M MP PE EG G4 4 D DV VR R 8 8C CH H M MO OD DE EL L Q QT T1 19 9D D3 32 28 8S SC C
Part 1- Package contents:
Part 2 – DVR Camera and Power Connections

Part 3 – DVR Rear Panel Layout
Part 4 – DVR Controls: Front Panel

Part 5 – Accessing the DVR menus
By pressing panel or the Remote Control’s “Menu” button under the preview mode, a password input frame will
appear. Enter the correct password and the system menu will appear.
The system default administrator password is 88888888, and the default operator password is 88888888.
After entering the menu, the main menu windows will appear as shown:
After entering into the menu, the cursor will appear highlighting the first symbol. The cursor can be moved by the
panel or by the UP & DOWN direction key s on the Remote Control. To go to the menu of a certain symbol, use the
panel or the Remote Control’s “Menu” key.
Now you are in operational mode, and are looking at the MAIN MENU. Under each symbol there are sub menus.
Please refer to Sections 4.9 and 4.10 in the owner’s manual for the Menu Guide and accessing the different functions.
Part 6 – Setting up DVR to record
There are 3 modes for recording:
1. Manual recording: Push the RECORD button. It will record all the time until you stop it by pushing the RECORD
button again.
2. Motion Detection Recording: This will record only when there is a Motion in front of the camera.
3. Time Schedule Recording: Use this option to record during specific times.
To Se t Up Mo t ion De t ec t ion Recording :
Use the remote control and push MENU, the default password is 88888888 then follow the instructions below:
Use the Down arrow to get to the second button which is
the RECORD button and push MENU to enter.
Go to DETECT and push MENU to enter Motion setup

In the Motion Setup screen, we need to setup CH 1
through 8 or whatever channel we want to enable motion
detection like in the above picture.
Then go to Detect Area and select SET ALL and push
MENU to enter the area and you will see an all screen
purple (right picture)
Then you need to push 0 (number 0) on remote control to
exit the area. And use LEFT Arrow to exit all the way out
of the menus.
The system will start recording when there is motion and a Blue Round ball will come up where a camera is
detecting motion.
To Se t Up Schedule Recording :
Use the remote control and push MENU, the default password is 88888888 then follow the instructions below:
In this Menu, click the second icon (Record)
Go to Schedule and push Menu to enter

Highlight the first line and push RIGHT arrow on remote
control, you will get the next screen……..
Select Monday and select the quality then select
ENABLE at the bottom. Push LEFT arrow to exit and
repeat steps for the other days.
Part 7 – Setting up DVR to Playback Files
T o playback a recorded file: Push the SEARCH button on remote control to bring up the next screen:
This screen lists all the latest recorded files. To go to the
previous files, use Left arrow. Use Up or Down arrows to
select the file and push MENU to play it. It plays one
camera at a time. To display a different camera, just push
the camera number on the remote control. To go back to
live camera view; push the PLAY button on remote
control.
Part 8 – Setting up the DVR to Backup Files
Using the procedure in chapter 3.5 of the user’s manual, from main menu select “Backup”, and then enter into “Local
Backup” sub-menu, system will display window shown below:

In above window, select backup equipment in “Backup Device”. There are two selection options: “USB Disk” and
“DVDRW/CDRW” (make your selection) and then enter the start time and the end time of the record file that you need
to backup in operation mode Select record type of the data that you need to backup in “Record Type”.
System will automatically return to real-time monitoring image during data backup process. And “Backup data
process” will display on screen. After finishing backup, system will display “Backup data finished” window. By
pressing panel’s “Menu” or Remote Control’s “Menu” key, system will return to real-time monitoring image. Backup
operation is complete.
If you have questions:
Contact Us:
Mailing Address: Customer Service:
DPS Inc. Phone: [phone] x 538
8015 E. Crystal Dr Email: [e-mail]
Anaheim, CA 92807 Live Chat from link on Q-see Website
Website: Tech Support:
http://www.q-see.com Phone: [phone] x 539
Fax: Email: [e-mail]
714-998-3509 Live Chat from link on Q-see Website
R RE EV V 0 06 60 04 40 09 9