Q-See QSD9004 series User manual

QSD9004 Manual Recording over the Network
STEP 1: Turn on your computer and open Internet Explorer.
STEP 2: In the address bar, enter in the IP address of your DVR.

QSD9004 Manual Recording over the Network
STEP 3: Click on the “LOGIN” button. If you set up a password on your DVR,
enter it in the “PASSWORD” field before clicking “LOGIN”. (If this screen does
not appear, see the “ActiveX Controls” guide)
STEP 4: Click on the “REPLAY” button.

QSD9004 Manual Recording over the Network
STEP 5: Set all channels to “ON”.
STEP 6: Click “APPLY”.

QSD9004 Manual Recording over the Network
STEP 7: Click “LIVE”.
STEP 8: Click on the “Record” button to start or stop recording.

QSD9004 Manual Recording over the Network
STEP 9: On the Channel Display, a small “R” will show which channels are
recording.
STEP 10: In order to locate the files that you manually recorded, go to your
desktop, click on the “Start” menu, and go to “My Computer”.

QSD9004 Manual Recording over the Network
STEP 11: Go to the C:/ drive.
STEP 12: Go to the “DVR” folder.

QSD9004 Manual Recording over the Network
STEP 13: A folder with the IP address of your DVR will be in this folder; all of
your manually recorded files will be located here.