QNAP QXG-5G4T-111C User manual

Network Expansion Card
This QNAP device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC Class B Notice:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Modifications:
Any modifications made to this device that are not approved by QNAP Systems, Inc.
may void the authority granted to the user by the FCC to operate this equipment.
This QNAP device complies with CE compliance Class B.
According to the requirement of the WEEE legislation the following user
information is provided to customers for all branded QNAP Electronics products
subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must
not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling,
please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址
www.qnap.com/regulatory/。
QNAP
Networking products
Compatibility
Copyright
©
2019 QNAP Systems, Inc.
Printed in Taiwan
P/N: 51000-024582-RS
download.qnap.com
helpdesk.qnap.com
www.qnap.com

Package contents
I. Remove PCIe cover Remove the PCIe cover and identify the required bracket.
II. Change the bracket
Use full-height bracket Use low-prole bracket Use low-prole at bracket
III. Install the LAN card in the NAS
Full-height bracket Low-prole bracket Low-prole at bracket
Screw packLow-prole at bracketFull-height bracketNetwork Expansion Card
+ Low-prole bracket
1
1
2
4
4
3
2
11
21
2
2
1
1
1
2
2

Hardware Specs
QXG-5G4T-111C
Controller Marvell AQtion AQC111C; Driver download: Marvell AQtion Driver Downloads (not
required for QTS)
Number of Ports 4 x NBASE-T (RJ45)
Connector NBASE-T (RJ45)
PCIe and Lanes PCIe Gen 3.0 x4
Transmission Rates 5Gbps/ 2.5Gbps/ 1Gbps/ 100Mbps
IEEE Standards IEEE 802.3an
IEEE 802.3bz
Bracket Low-profile bracket pre-installed; full-height and specialized (for selected QNAP
NAS) brackets are bundled
Supported NAS operating
systems
QTS/QuTS hero (recommend an upgrade to the latest version); Windows (Driver
required); Linux (Driver required)
Supported QNAP NAS Models with PCIe slot(s) (1 free slot required)
Support Ubuntu
Commercial Linux
Distribution
Ubuntu 18.04/20.04
Support Windows Windows 8/10
Port and Cable RJ-45; over CAT-5e class cable
Package Content 1 x Network card; 1 x QIG; 3 x Brackets
Note: Use only QNAP memory modules to maintain system performance and stability. For NAS devices with more than one memory
slot, use QNAP modules with identical specifications.
Warning: Using unsupported modules may degrade performance, cause errors, or prevent the operating system from starting.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
Product images are for illustrative purposes only and may differ from the actual product. Due to differences in monitors, colors of
products may also appear different to those shown on the site.
Designs and specifications are subject to change without notice.