QNO WCS-2000 User manual

WCS：Quick Install Guide
v.1

Receiver
Antennas HDMI Cable Adapter
Transmitter
HDMI Cable USB CableType-C Cable
For Type-C For HDMI
Package Contents

Installation Receiver
Adapter (12V) Projector
HDMI OUT
Front
1 2
DC
Antenna X4
RX Ready ON
Back
IDLE
POWER
PROJECTION
VIP
3

TX Ready
1 3
2
USB
HDMI
Type-C
HDMI
Type-C
Installation Transmitter
For Type-C laptop :
•Requires USB3.1 Type-C (Display Port) or Thunderbolt TM3 Type-C connector on PC
•電腦介面需支援USB 3.1 Type-C (Display Port)或ThunderboltTM3 Type-C
•计算机接口需支持USB 3.1 Type-C (Display Port)或ThunderboltTM3 Type-C

Features Presentation
Click

12
3 4
Features Split Screen
1 1
1

MENU SPLIT SCREEN
UP
DOWN
Menu Usage
VIP
Projection priority for the selected TX.
讓選定的發射器(TX)有優先投影權
让选定的发射器(TX)有优先投影权
Wi-Fi Channel
Re-Scan
Re-Scan and select Wi-Fi channel
重新掃描與選擇Wi-Fi頻道
重新扫描与选择Wi-Fi频道
Auto Split
Auto : Automatically switch to split screen(4
screen) when more then one user is sharing at
the same time.
Auto：當有多個TX投影時,自動分割為四個畫面
Auto：当有多个TX投影时,自动分割为四个画面
Features MENU
FULL SCREEN
ENTER

Appendix

Appendix I/O Interface
FRONT
BACK
IDLE
POWER
USB
CHARGE HDMI IN
PROJECTION
VIP
PAIR
DC 12V HDMI OUT USB Ethernet RESET
TV Dongle
Power Adapter
Projector, TV…
Keyboard ,Mouse ,Touch Panel…
Pairing with new TX device
Factory Default
Network Connection

1
2
TX: Flashing red
Back
Appendix Transmitter Pairing Process
•If you have purchased additional TX unit(s),please pair them with your RX by following this simple process.
•當購入新的發送器(TX),請依照步驟將其與原有的接收器(RX)配對.
•当购入新的发送器(TX),请依照步骤将其与原有的接收器(RX)配对.
RESET
PAIR
USB Ethernet
PROJECTION
VIP
IDLE
POWER
Front
RX: Hold PAIR button until IDLE light flashes green light.
USB
CHARGE
TX: Press and hold until the
green light flashes
3

45
TX: Pairing completed
Pairing Pairing OK SN:
Appendix Transmitter Pairing Process
TX: Flashing green red

Features VCS
1
Power Adapter
Projector
Connect to Ethernet
Camera, Microphone, Speaker
USB
Ethernet
SSID: wps-5g-■■■■■
IDLE SCREEN
OR
Connect to Wi-Fi
2
Connect to Ethernet
Connect to Ethernet

Features VCS
3
VCC
Search
Connect
VCS
Search and connect to VCS
4
Install VCC Application
(win10 or 11)
Open Conference Application , change camera or
Audio to VCS’s
Setting > Microphone / Speaker
VCS-Audio
Setting > Camera
VCS-CAM
VCS-Main Display
VCS-Main Display
VCS-CAM
VCS-Audio