Qomo QRF600 User manual

QRF600 Quick Guide
Introduction to the QRF600 audience response system
1. Remotes and Dongle
Load two “AAA” batteries into the Instructor
(F1-1a) and Student (F1-1b) remotes. Turn on the
keypad by pressing the Power Key
2. Start the System
a. Install QClick software from the CD.
b. Double-click the icon on the desktop to
launch QClick software.
c. Plug in the USB dongle (F1-1c), which should
be automatically recognized by QClick and go
into the login dialog.
d. Enter the default username and password, both
are “qomo”.
Note: If you click Cancel, QClick software will be
in Read-only Mode.
e. The QClick toolbar will appear and
shows“QRF600 Connected”. If the toolbar
shows “QRF600 No Host”, try to re-plug in
the USB dongle.
3. Setup a Class
a. Click Class icon (F3.1-3a) under Quiz Genius
tab. Click Edit (F3.2-3c) button next to the
Class Name field. Select Add tab and enter
your class name. Click Add button (F3.2-3d)
and Student Settings window will pop up.
b. In the Student Setting window select „Add
New Students‟, Enter Student ID, Name, and
any additional information in Student Profiles
window. Click Save to add a student into the
database. Click Close to complete the settings.
c. Click OK button in Class Settings window.
Class icon (F3.1-3a) will turn to green when the
class is loaded.
Note: If the icon is not green, it means the class is
not loaded properly.

QRF600 Quick Guide
4. Import a Class
a. Select a desired class from Class Name drop
down list in Class Settings window; or set up a
new class.
b. Select the Import option(F4.1-4a); click OK
c. Find your excel file with your class list and
click Open.
d. From the drop down menus above the mock
excel sheet, select the correct title for your
imported columns.
e. Click on the Import button (F4.2-4b); a
window will pop up when the import is
successful; click OK.
Note: The class you import from excel must have
three columns of set information filled out: the
First Name, Last Name, and Student ID.

QRF600 Quick Guide
5. Prepare an Exam
a. On the QClick toolbar under Exam Editor, click
New (F5.1-5a) or Open (F5.1-5b) button, and
PowerPoint will initiate.
b. Click the Add button (F5.1-5c) on the QClick
toolbar to add template slides to the
presentation. The Add Slides window will
appear with selection options. You can also use
PowerPoint to add slides to be recognized by
QClick later on.
c. Save PowerPoint Slides as a file, keep it open.
d. On the QClick toolbar, click the Setup button
(F5.1-5d) then click Obtain (F5.4-5e) to
recognize the content of the slide in the Clicker
Display Area.
e. Set the question properties about Question #,
Question Mode, Activity Mode in the drop
down lists.
f. Choose the answer in the Correct Answer
Selection area.
Note: If the quiz file needs any modification,
please remember to close Setup and modify the
PPT file in PowerPoint directly, then open
Setup and Obtain the changes of the page to re-
recognize your question, then click Save
Setting.
g. Click Save Setting (F5.4-5f) when finished, and
then click Exit.
Note: For additional question setting options, click
Advanced button (F5.4-5g) to choose from the
following: Difficulty Level Setting, Cloze Test
Criteria and Standard Setting. All the
information will be stored inside the
PowerPoint file, you can design more using
PowerPoint as you like.

QRF600 Quick Guide
6. Instructor Login
This process may also be completed after 3.Setup
a Class. From the main menu (F6-6a) press the
OK Key on the keypad and the class info screen
will appear. Press OK, the test interface will
initiate on the computer and the students‟ screen.
7. Student Login
From the main menu (F7-7a), press Key
select 4. Hardware, then select 1.SetStudentID
(F7-7b). Delete the default student ID, and change
it to correspond with the Student ID in the selected
class. Click OK. Back to the main menu (F7-7a),
press OK Key and the class info screen will
appear.
8. Run a Quiz
a. On QClick software Toolbar, press Load to
select a PowerPoint file to run as a quiz.
b. The Load icon (F3.1-3b) will turn to green.
Then press run.
c. A (F8-8a) menu will appear along the bottom
of the screen from which you can operate your
exam. At the top of the screen a (F8-8b) list of
student registration numbers will appear.
d. Start any question by clicking Start (F8-8c),
ending the timer by clicking Stop (F8-8d), and
go through questions using arrow keys.
9. View Results
During an exam, check the students‟ results after
each question by pressing Result (F8-8e) or Report
(F8-8f).

QRF600 Quick Guide
10. Generate Reports
a. After saving an exam session, go to the Reports
icon to open the Reports window. Select the
appropriate test or exam file and click on the
Report icon in the (F10.1-10a) Create Report
box.
b. In Create Report, you can preview and create
various reports of your students‟ performance.
All reports can be printed, exported, or saved.