Quadra-Fire 57ST-ACC-AU User manual

Page 1 7038-201D October 12, 2015
5700 STEP TOPACC WOOD BURNER INSTALLATIONAND OPERATING INSTRUCTIONS
5700 STEP TOPACC WOOD BURNER INSTALLATION AND OPERATING INSTRUCTIONS
INSTALLATIONS TO COMPLY WITH AS/NZS2918:2001
AND WILL REQUIRE A BUILDING CONSENT
IMPORTANT: Read all instructions carefully before starting installation. Failure to follow these
instructions may result in a fire hazard and will void the warranty.
• Fig. 3,4 and Table 1 & 2 relate to installations with tested flue systems; as per AS/NZS 2918:2001 - Appen-
dix F, with a ceiling angle between 0° - 30° inclusive.
• For installations with a ceiling angle greater than 30°, refer to Fig. 6 & 7 and AS/NZS 2918:2001 4.6.3(b)
• Ceiling Plate may vary in size depending on ceiling angle. Please specify ceiling pitch prior to ordering the
ceiling plate.
• Quadra-Fire 5700 Step Top ACC wood burner’s are tested and approved to the N.Z. National Environmen-
tal Standards;
57ST-ACC-AU -5700 Step Top ACC Hardwood Certified
Particulate Emissions = 1.5 g/kg Space Heating Efficiency = 65%
Model:
57ST-ACC-AU

Page 2 7038-201D October 12, 2015
5700 Step Top ACC Wood Burner
Hearth & Home Technologies welcomes you to our tradition
of excellence! In choosing a Quadra-Fire appliance, you
have our assurance of commitment to quality, durability, and
performance.
This commitment begins with our research of the market,
including ‘Voice of the Customer’ contacts, ensuring we
make products that will satisfy your needs. Our Research
and Development facility then employs the world’s most
advanced technology to achieve the optimum operation of
our stoves, inserts and fireplaces. And yet we are old-fash-
ioned when it comes to craftsmanship. Each unit is meticu-
lously fabricated and surfaces are hand-finished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
and Welcome to the Quadra-Fire Family!
5700 STEP TOP ACC
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
2015 2016 2017
INSTALLATION
DATE
ACC WOODFIRE COMPLIANCE LABEL
R
SERIAL NO.
007049
7038-200C
This appliance has been TESTED TO AS/NZS4013 for Hardwood by Vipac Engineers and Scientists
Report # 30A-14-0102-TRP-361517-0 Date tested: April 2015
MODEL QUADRA-FIRE 5700 STEP TOP ACC FREESTANDING WOOD STOVE
65%
1.5 g/kg
12.7 kW
BURN ONLY HARDWOOD WITH A MOISTURE CONTENT LESS THEN
25% (dry basis).
Wetbacks are NOT an approved option and must not be tted.
Hearth & Home Technologies, 1445 North Highway, Colville,WA
99114, United States of America.
OVERALL AVERAGE EFFICIENCY BURNING HARDWOOD
WHENTESTED IN ACCORDANCETO AS/NZS 4012
AVERAGE PARTICULATE EMISSION FACTOR BURNING HARDWOOD
WHEN TESTED IN ACCORDANCE TO AS/NZS 4013
MAXIMUM AVERAGE HEAT OUTPUT BURNING HARDWOOD
APPROVED FUEL
WETBACK - ALL MODELS
MANUFACTURED BY
PERFORMANCE MAY VARY FROM TEST VALUES DEPENDING ON ACTUAL
OPERATING CONDITIONS.
U.S. ENVIRONMENTAL PROTECTION AGENCY
Export stove. May not be operated within the United States.

October 12, 2015 7038-201D Page 3
5700 Step Top ACC Wood Burner
Quadra-Fire 5700 STEP TOP ACC Wood Burner Dimensions Pedestal Model
Quadra-Fire 5700 STEP TOP ACC Wood Burner Dimensions Leg Model
33 mm
203 mm
662 mm
856 mm
89 mm
94 mm
699 mm
94 mm
686 mm
535 mm
280 mm
435 mm
379 mm
945 mm
489 mm 330 mm
610 mm
822 mm
769 mm 170 mm
522 mm
664 mm
25 mm
Fig. 1
Fig. 2

Page 4 7038-201D October 12, 2015
5700 Step Top ACC Wood Burner
DESCRIPTION
Hawkwind Kit
Shall be Fitted
A Min. Clearance from firebox to rear wall 200mm
B Min. clearance from firebox to side wall 330mm
C Min. distance from firebox opening to floor protector front 450mm
D Min. distance from firebox to floor protector side 76mm
E Min. distance from flue centre to side wall 673mm
F Depth of floor protector 1210mm
G Width of floor protector 850mm
Minimum floor protector thickness 6mm
Quadra-fire 5700 Step Top ACC does not require a insulating Floor Protector, as they are tested and
comply with the minimum Floor Protector requirements of AS/NZS 2918:2001.
Note:
▪The minimum Floor Protector sizes are specified in the clearance chart, see Table 1 & 2.
▪A Floor Protector can include ceramic tiles with grouted joints fixed directly onto a wooden floor or
a sheet of toughened glass, panel steel or any other non combustible material laid directly onto a
wooden floor.
▪If installed directly onto a concrete slab, the concrete slab can be considered as the floor
protector,but must maintain the minimum measurement listed.
FLOOR PROTECTOR
PARALLEL POSITIONING
NOTE: HEAT SHIELD REQUIREMENTS FOR HEAT SENSITIVE WALLS
Clearances may be reduced by provision of an appropriately located heat shield refer to
AS/NZS 2198:2001 3.2.3 TABLE 3.1
Table 1
Fig. 3
Drawing not to scale
A
E
B
F
D
C
G

October 12, 2015 7038-201D Page 5
5700 Step Top ACC Wood Burner
CORNER POSITIONING (45°)
DESCRIPTION
Hawkwind Kit
Shall be Fitted
A Min. clearance from firebox to corner walls 100mm
B Depth of floor protector 1210mm
C Min. distance from firebox opening to floor protector front 450mm
D Min. distance from firebox to floor protector side 76mm
E Width of floor protector 850mm
Minimum floor protector thickness 6mm
CORNER POSITIONING (45°)
Drawing not to scale
Table 2
Fig. 4
FIREBOX INSTALLATION
1. If a separate floor protector is being used position now. Place the firebox on a floor protector that
is at least 6mm thick to suit the minimum installation clearances. (See Fig 3 or 4).
2. Seismically restrain the firebox and the floor protector to the floor.
3. Fit 2 x 6mm fixings suitable for the floor material. DO NOT over tighten.
4. Fit timber trim pedestal edging to front and back of base (optional).
A
A
B
E
C
D