Quality Lifesciences Moskitrap GM937 User manual

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING
THE APPLIANCE.
KEEP MANUAL IN A SAFE PLACE FOR EASY REFERENCE.
PEST TRAP(OUTDOOR)
Model No.:GM937
INSTRUCTION MANUAL
Quality Lifesciences Pvt. Ltd
Ahmedabad, Gujarat. INDIA
Customer care No. [phone]

SAFETY PRECAUTIONS
PLEASE READ THE FOLLOWING SAFETY INSTRUCTIONS CAREFULLY TO AVOID THE RISK OF
ELECTRIC SHOCK, SHORT CIRCUIT, FIRE HAZARD AND DAMAGE TO THE UNIT
1. Keep out of reach of children. Children or any person with visual, mental or physical impairment
should onlyuse this unit under the supervision of an adult responsible for their safety.
2. Do not tamper, modify or attempt to repair the plug, cord or unit. Repairs should only be carried out
by a qualified electrician or service technician.
3. Avoid prolonged eye contact with the light.
4. Keep away from children. Children should be closely supervised if they are in the vicinity of the
appliance when it is operating.
5. Do not insert fingers or foreign objects into the appliance at any time.
6. Always disconnect from the electrical supply before emptying the insect container or cleaning the
unit with a soft dry cloth.
7. Keep away from all sources of moisture. Do not operate the unit near any water source.Do not
expose the unit to moisture or liquid at any time.
8.If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
9.This appliances not intended for use by persons(including children) with reduce physical,sensory
or mental capabilities,of lack of experience and knowledge,unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
10.Do not use the machine in inflammable and explosion hazard gas, dusty and liquid areas.
11.Please install the machine in an outdoor place that fully exposed to sunlight, and avoid the shade for
better charging.
STRUCTURE AND PARAMETER
Solar Panel
LED Lighting
Infrared probe
Switch
365nm light wave
Electric grid with DC2000V
Mosquito storage box
Stake
Base
Ground cone
WORKING PRINCIPLE
Solar charging
The photoelectric effect is used to convert
solar radiation into electricity, which is
stored in batteries for use by machines.
Infrared lighting
Infrared human body sensor, when people
is 5 to 8 meters away from the machine,
LED Lamp will light up and the trap function
will stop.
365nm luring Light wave
When the Zapper on, produce 365nm light wave,
irresistible to mosquito and other insects.
Electric grid
Insects will be killed by high DC2000 voltage
when they get closed to the grid.
Insect killer×1
Stake×1
Instruction Manual×1 brush×1
screwdriver×1
Screws×3
expansion screw×3
Ground cone×1
CONTENTS OF PACKAGE
power：1.5W
Electrifying Net Voltage：2000V- - -
Battery:3.7V 5200mAh
INSTALLATION
1. Put the stake on the ground. 2. Connect the head with stake, make sure
the hole is in position..
3. Tighten the screw in each side with
screwdriver.
4. Make sure the head and the stake is
connected well.
Stake screws×4
1 2

USE METHOD
USE METHOD
LIGHT - OFF - AUTO
LIGHT - OFF - AUTO
LIGHT - OFF - AUTO
FIXING
Always place the infrared
sensor side to the pavement
Always place the infrared
sensor side to the pavement
1. For soft ground, Insert the ground cone
into the ground
2. Connect the stake with the ground cone
with M8 screws.
3. For firm ground, punch 3 holes on the
ground
4. Connect the stake with the ground cone
with expansion screws.
(Auto mode)
1. Switch to Auto mode, insect killer(UV-LED
and electric grid) will be active.
2. UV-LED and electric grid will turn on
automatically by light sensor.
3. The rechargeable battery will be charged
through solar panel by sunlight.
4. The infrared sensor will recognize and turn off
UV-LED and electric grid when people get colsed to
it, and the lighting LED will turn on accordingly. After
30s, UV-LED and electric grid will be active again,
the lighting LED will be turned off.
(Lighting mode and off mode)
1. Switch to lighting mode, the lighting LED
will be turned on low light automatically at
night.
2. The infrared sensor will recognize and turn to high
light when people get colsed to it. After 30s, it will be
turned to low light
3. Switch to OFF mode, power will be cut off. 4. Kind reminder: do not place the machine near
other light source, like street lamp.
3 4

CLEANING
1. Unscrew the screw holding the grid, and pull out the grid gently.
2. Clean the electric grill with brush. And assemble the grid well.
3. Take out the mosquito storage box.
4. Throw away the insect bodies, clean the box with brush.
Regular cleaning is good
for the mosquito
elimination effect.
Make sure the trap is
power off before cleaning.
REPLACE UV LAMP
1. Remove the screw, and take out the
front guard.
2. Remove four inner screws
3. Disconnect into two parts 4. Replace the new UV lamp and install back
accordingly.
5 6