Quanmax KEEX-7100 Series User manual

I
KEEX-7100 Series User’s Manual
KEEX-7100 Series
Intel®Embedded Compact Extended Form Factor
with Intel® Celeron / Core i processor
User’s Guide

II
KEEX-7100 Series User’s Manual
Contact Info: Quanmax Inc.
4F, No. 415, Ti-Ding Blvd. Sec. 2NeiHu District,
Taipei 114Taiwan
Tel: [phone]
Fax: [phone]
Visit our site at: www.quanmax.com
© 2013 Quanmax Inc. All rights reserved.
The information in this user’s guide is provided for reference only. Quanmax does not assume any
liability arising out of the application or use of the information or products described herein. This user’s
guide may contain or reference information and products protected by copyrights or patents and does
not convey any license under the patent rights of Quanmax, nor the rights of others.
Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade
names used in this user’s guide are the property of their respective owners. All rights reserved. This
user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s
guide in other publications. Customers may alter this user’s guide and publish it only after they remove
the Quanmax name, cover, and logo.
Quanmax reserves the right to make changes without notice in product or component design as
warranted by evolution in user needs or progress in engineering or manufacturing technology.
Changes which affect the operation of the unit will be documented in the next revision of this user’s
guide.

Content
3
KEEX-7100 Series User’s Manual
Content
Content.......................................................................................................................3
Figures.......................................................................................................................5
Tables.........................................................................................................................6
Safety Instructions......................................................................................................8
Before You Begin.........................................................................................8
When Working Inside a Computer...............................................................8
Preventing Electrostatic Discharge..............................................................9
Preface..................................................................................................................... 11
How to Use This Guide.............................................................................. 11
Unpacking.................................................................................................. 11
Regulatory Compliance Statements .......................................................... 11
Warranty Policy .........................................................................................12
Maintaining Your Computer.......................................................................13
Chapter 1 Introduction...........................................................................................16
Overview ...................................................................................................16
Product Specifications...............................................................................17
System Block Diagram..............................................................................18
Mechanical Dimensions.............................................................................19
Chapter 2 Hardware Settings ................................................................................20
Overview ...................................................................................................20
Jumper Settings and Pin Definitions..........................................................21
Jumper Settings ......................................................................................22
Rear Panel Pin Assignments...................................................................24
Main Board PinAssignments...................................................................27
Chapter 3 System Installation................................................................................36
Expansion Interfaces.................................................................................36
Memory Module Installation.......................................................................36
Chapter 4 AMI BIOS Setup....................................................................................38
Overview ...................................................................................................38
Main Menu.................................................................................................39
Advanced Menu.........................................................................................40
Boot Menu.................................................................................................52
Security Menu............................................................................................53
Save & Exit Menu......................................................................................54

Content
4
KEEX-7100 Series User’s Manual
Chapter 5 Driver Installation.................................................................................56
AppendixA DIO (Digital I/O) Sample Code............................................................57
Appendix B WatchDog Timer Sample Code..........................................................59

Figures
5
KEEX-7100 Series User’s Manual
Figures
Figure 1 Block Diagram .............................................................................18
Figure 2 Mechanical Dimensions...............................................................19
Figure 3 Jumper Connector.......................................................................20
Figure 4 Jumper and Connector Locations................................................21
Figure 5 Rear Panel IO..............................................................................24
Figure 6 Align the SO-DIMM Memory Module with the onboard socket.....36
Figure 7 Press down on the SO-DIMM Memory Module to lock it in place 37

Tables
6
KEEX-7100 Series User’s Manual
Tables
Table 1 KEEX-7100 Series Specification ...................................................18
Table 2 Jumper List....................................................................................22
Table 3 JP1 AT / ATX Mode Selection........................................................22
Table 4 JP2 RTC Reset Selection..............................................................22
Table 5 JP3 SRTC Reset Selection ...........................................................22
Table 6 JP4 Panel & Backlight Power Selection for LVDS2.......................22
Table 7 JP5 Backlight Power Enable Selection for LVDS2.........................23
Table 8 JP6 Backlight Power Enable Selection for LVDS1.........................23
Table 9 JP7 Panel & Backlight Power Selection for LVDS1.......................23
Table 10 JP8 ME F/W Selection.................................................................23
Table 11 JP9 USB Power Selection...........................................................23
Table 12 Rear Panel Connector List ..........................................................24
Table 13 CN4 USB3.0 Port-0,1 Type-A Connector..................................24
Table 14 CN5 USB3.0 Port-2,3 Type-A Connector.....................................25
Table 15 CN14 GbE LAN1 RJ-45 Connector.............................................25
Table 16 CN15 GbE LAN2 RJ-45 Connector.............................................25
Table 17 DP1 DisplayPort Connector.........................................................25
Table 18 DP2 DisplayPort Connector.........................................................26
Table 19 HDMI1 HDMI Connector..............................................................26
Table 20 Internal Connector List ................................................................27
Table 21 ATX1 +12V Power Input Connector.............................................27
Table 22 BAT1 CR2032 Battery Power Input Wafer...................................27
Table 23 COM1 RS-232/422/485 Port 1 Wafer..........................................28
Table 24 COM2 RS-232 Port 2 Wafer........................................................28
Table 25 CN1 Backlight Power Output Wafer for LVDS 1..........................28
Table 26 CN2 Backlight Power Output Wafer for LVDS 2..........................29
Table 27 CN3 VGAOutput Header ............................................................29
Table 28 CN6 USB2.0 Port 8, 9 Pin Header...............................................29
Table 29 CN7 USB2.0 Port 10, 11 Pin Header...........................................30
Table 30 CN8 Keyboard & Mouse Wafer ...................................................30
Table 31 CN9 SIM Interface Wafer for MPCIE 1........................................30
Table 32 CN10Audio Pin Header ..............................................................30
Table 33 CN11 SATA HDD Power Output Wafer........................................31
Table 34 CN12 Left Channel 2W AudioAMP Output Wafer.......................31

Tables
7
KEEX-7100 Series User’s Manual
Table 35 CN13 Right Channel 2W Audio AMP Output Wafer.....................31
Table 36 CN16 Digital Input / Output Wafer...............................................31
Table 37 CN17 S/PDIF Output Pin Header................................................32
Table 38 CN18 MPCIEATC Pin Header for MPCIE 1................................32
Table 39 DIMM1 DDR3 Memory SO-DIMM Socket ...................................32
Table 40 FAN1 CPU FAN Wafer.................................................................32
Table 41 FP1 Front Panel 1 Pin Header ....................................................32
Table 42 FP2 Front Panel 2 Pin Header ....................................................32
Table 43 LVDS1 Primary 24-bit, 2-channel LVDS Panel Connector...........33
Table 44 LVDS2 Secondary 24-bit, 2-channel LVDS Panel Connector......33
Table 45 MPCIE1 Mini-PCIe Express v 1.2 Socket....................................34
Table 46 SATA1 Serial ATA Port 0 Connector ............................................35
Table 47 SATA2 Serial ATA Port 1 Connector ............................................35
Table 48 BIOS Main Menu.........................................................................39
Table 49 Advanced Menu...........................................................................40
Table 50 Advanced Menu – Display Configuration.....................................41
Table 51 Advanced Menu –Power Management Configuration..................42
Table 52 Advanced Menu –CPU Advanced Configuration.........................43
Table 53 Advanced Menu –AMT Configuration..........................................44
Table 54 Advanced Menu –Trusted Computing .........................................44
Table 55 Advanced Menu –SATA Configuration.........................................45
Table 56 Advanced Menu – Intel Rapid Start Technology ..........................46
Table 57Advanced Menu –Intel TXT (LT) Configuration............................46
Table 58 Advanced Menu –USB Configuration..........................................47
Table 59 Advanced Menu –DIO Configuration...........................................48
Table 60 Advanced Menu – Super IO Configuration..................................49
Table 61 Advanced Menu –Super IO Configuration – Serial Port 1
Configuration...............................................................................49
Table 62 Advanced Menu –Super IO Configuration – Serial Port 2
Configuration...............................................................................50
Table 63 Advanced Menu –H/W Monitor....................................................51
Table 64 Boot Menu...................................................................................52
Table 65 Security Menu .............................................................................53
Table 66 Save & Exit Menu........................................................................54

Safety Instructions
8
KEEX-7100 Series User’s Manual
Safety Instructions
Before You Begin
Before handling the product, read the instructions and safety guidelines on the
following pages to prevent damage to the product and to ensure your own personal
safety. Refer to the “Advisories” section in the Preface for advisory conventions used
in this user’s guide, including the distinction between Warnings, Cautions, Important
Notes, and Notes.
Always use caution when handling/operating a computer. Only qualified,
experienced, authorized electronics service personnel should access the
interior of a computer. The power supplies produce high voltages and
energy hazards, which can cause bodily harm.
Use extreme caution when installing or removing components. Refer to the
installation instructions in this user’s guide for precautions and procedures.
If you have any questions, please contact Quanmax Post-Sales Technical
Support.
WARNING
High voltages are present inside the chassis when the unit’s power cord is
plugged into an electrical outlet. Turn off system power, turn off the power
supply, and then disconnect the power cord from its source before
removing the chassis cover. Turning off the system power switch does not
remove power to components.
When Working Inside a Computer
Before taking covers off a computer, perform the following steps:
1. Turn off the computer and any peripherals.
2. Disconnect the computer and peripherals from their power sources or
subsystems to prevent electric shock or system board damage. This does not
apply when hot swapping parts.

Safety Instructions
9
KEEX-7100 Series User’s Manual
3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the
following page.
4. Disconnect any telephone or telecommunications lines from the computer.
In addition, take note of these safety guidelines when appropriate:
To help avoid possible damage to system boards, wait five seconds after
turning off the computer before removing a component, removing a system
board, or disconnecting a peripheral device from the computer.
When you disconnect a cable, pull on its connector or on its strain-relief loop,
not on the cable itself. Some cables have a connector with locking tabs. If you
are disconnecting this type of cable, press in on the locking tabs before
disconnecting the cable.As you pull connectors apart, keep them evenly
aligned to avoid bending any connector pins.Also, before connecting a cable,
make sure both connectors are correctly oriented and aligned.
CAUTION
Do not attempt to service the system yourself except as explained in this
user’s guide. Follow installation and troubleshooting instructions closely.
Preventing Electrostatic Discharge
Static electricity can harm system boards. Perform service at an ESD workstation
and follow proper ESD procedure to reduce the risk of damage to components.
Quanmax strongly encourages you to follow proper ESD procedure, which can
include wrist straps and smocks, when servicing equipment.
You can also take the following steps to prevent damage from electrostatic
discharge (ESD):
When unpacking a static-sensitive component from its shipping carton, do not
remove the component’s antistatic packing material until you are ready to install
the component in a computer. Just before unwrapping the antistatic packaging,
be sure you are at an ESD workstation or grounded. This will discharge any
static electricity that may have built up in your body.

Safety Instructions
10
KEEX-7100 Series User’s Manual
When transporting a sensitive component, first place it in an antistatic container
or packaging.
Handle all sensitive components at an ESD workstation. If possible, use
antistatic floor pads and workbench pads.
Handle components and boards with care. Don’t touch the components or
contacts on a board. Hold a board by its edges or by its metal mounting bracket.
Do not handle or store system boards near strong electrostatic, electromagnetic,
magnetic, or radioactive fields.