Quantum StorNext M330 Installation instructions

Hardware Guide
StorNext M330
Metadata Appliance
6-67638-01 Rev C

ii
Quantum StorNext M330 Metadata Appliance Hardware Guide 6-67638-01 Rev C, July 2014.
Product of USA.
Quantum Corporation provides this publication “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties of merchantability or fitness for a particular purpose. Quantum Corporation may revise this
publication from time to time without notice.
COPYRIGHT STATEMENT
© 2014 Quantum Corporation. All rights reserved.
Your right to copy this manual is limited by copyright law. Making copies or adaptations without prior written authorization of
Quantum Corporation is prohibited by law and constitutes a punishable violation of the law.
TRADEMARK STATEMENT
Quantum, the Quantum Logo, Backup. Recovery. Archive. It's What We Do., Be Certain, Be Quantum Certain, DLT, the DLT Logo,
DLTSage, DLTtape, the DLTtape Logo, DXi, DXi Accent, Dynamic Powerdown, FastSense, FlexLink, GoProtect, GoVault, iLayer,
Lattus, MediaShield, Optyon, Pocket-sized., Well-armored., Preserving the World's Most Important Data. Yours., Q-Cloud,
Quantum Certain, Quantum Certainty, Quantum vmPRO, Scalar, SDLT, SiteCare, SmartVerify, StorageCare, StorNext, Super
DLTtape, SuperLoader, and Vision are either registered trademarks or trademarks of Quantum Corporation and its affiliates in the
United States and/or other countries. All other trademarks are the property of their respective owners.
Products mentioned herein are for identification purposes only and may be registered trademarks or trademarks of their
respective companies. All other brand names or trademarks are the property of their respective owners.
Quantum specifications are subject to change.

StorNext M330 Metadata Appliance Hardware Guide iii
Contents
Chapter 1 Introduction 1
About the StorNext M330 Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
About the StorNext M330 Metadata Appliance . . . . . . . . . . . . 1
About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Network Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Base System and Expansion Description . . . . . . . . . . . . . . . . . 2
StorNext M330 Documents. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Purpose of This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
How This Guide is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Notes, Cautions, and Warnings. . . . . . . . . . . . . . . . . . . . . . . . . 3
Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Product Safety Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2 Hardware Overview 9
StorNext M330 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
StorNext M330 MDC Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . 10
StorNext M330 Metadata Array . . . . . . . . . . . . . . . . . . . . . . . 17
StorNext M330 Connectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
StorNext M330 Power Cabling . . . . . . . . . . . . . . . . . . . . . . . . 24
StorNext M330 SAS Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Contents
iv StorNext M330 Metadata Appliance Hardware Guide
StorNext M330 LAN Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 26
StorNext M330 SAN Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Relocating the StorNext M330 System . . . . . . . . . . . . . . . . . . . . . . . . 30
Chapter 3 Basic System Operations 31
Powering On All StorNext M330 System Components. . . . . . . . . . . . . 32
Shutting Down All StorNext M330 System Components . . . . . . . . . . . 33
Powering On a Single MDC Node of the StorNext M330. . . . . . . . . . . 35
Shutting Down a Single MDC Node of the StorNext M330 . . . . . . . . . 35
System Serial Numbers and Service Tag. . . . . . . . . . . . . . . . . . . . . . . . 37
Locating the System Serial Number . . . . . . . . . . . . . . . . . . . . 37
Serial Number Format. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Locating the Service
Tag Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Before Upgrading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TSM Indexing Delay for Large Databases . . . . . . . . . . . . . . . . 38
Running the Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Upgrading Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Upgrade Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Obtain the Firmware Upgrade Files. . . . . . . . . . . . . . . . . . . . . 40
Upgrade Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Deleting Uploaded Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Converting to HA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
HA Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Additional Common Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Changing the MDC VIP Address . . . . . . . . . . . . . . . . . . . . . . . 50
StorNext Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Chapter 4 Contacting Quantum 53
Comments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

StorNext M330 Metadata Appliance Hardware Guide 1
Chapter 1
Introduction
About the StorNext M330 Hardware
About the StorNext
M330 Metadata
Appliance
The StorNext M330 Metadata Appliance offers the powerful file-sharing
capabilities of StorNext in an optimized appliance package. The
StorNext M330 comes with a pair of metadata controller (MDCs) nodes
in a High Availability (HA) configuration and a high-performance
metadata array..
.MDCs coordinate SAN file access across clients. Additionally, the
standby node can be used as a distributed data mover (DDM) host using
the included license.
During installation, the StorNext M330 is configured for use in StorNext
environments operating as a StorNext Metadata Controller (MDC) High
Availability (HA) pair with access to both disk and tape libraries.

Chapter 1: Introduction
About the StorNext M330 Hardware
2 StorNext M330 Metadata Appliance Hardware Guide
About this document This document describes how to maintain the StorNext M330 after
initial installation and configuration .
Hardware Specification Each StorNext M330 MDC node contains the following:
• Two redundant, hot-swappable system hard drives in a RAID 1
configuration
• Redundant cooling fans and power
Network Connectivity Here are the quantity and type of network ports available on the
different system models:
• The StorNext M330 features one 2-port 8 Gb FC card for SAN
network connectivity.
• The StorNext M330 features three configurable 1 GbE Ethernet
ports per node.
MDCs coordinate SAN file access across SAN clients. Additionally, the
standby node can be used as a distributed data mover (DDM) host.
Base System and
Expansion Description
The StorNext M330 comes configured as a Base System with two
Metadata Controller (MDC) nodes which share a common file system
located on a single metadata array for storage.
StorNext M330
Documents
A complete list of documentation for the StorNext M330 Metadata
Appliance is located on the following web page:
http://www.quantum.com/snmdcdocs

Chapter 1: Introduction
Purpose of This Guide
StorNext M330 Metadata Appliance Hardware Guide 3
Purpose of This Guide
This guide describes how to identify and operate the key features of the
hardware components of the StorNext M330.
How This Guide is
Organized
This guide contains the following chapters:
•Chapter 1, Introduction provides an overview of this StorNext M330
Hardware Guide, and also includes document conventions, product
safety statements, a list of related documents, and supported
Internet browsers.
•Chapter 2, Hardware Overview provides an overview of the StorNext
M330 system.
•Chapter 3, Basic System Operations provides basic operating
instructions for the StorNext M330 system.
•Chapter 4, Contacting Quantum- provides information on
contacting Quantum support.
Notes, Cautions, and
Warnings
The following describes important information about Notes, Cautions,
and Warnings used throughout this guide.
Note
Note: Emphasizes important information related to the main topic.
Consequences if not followed:
There are no hazardous or damaging consequences.
Caution
Caution: Indicates potential hazards to equipment or data.

Chapter 1: Introduction
Purpose of This Guide
4 StorNext M330 Metadata Appliance Hardware Guide
Consequences if not followed:
Failure to take or avoid this action could result in loss of data or
harm to equipment.
Warning
WARNING: Indicates potential hazards to personal safety.
Consequences if not followed:
Failure to take or avoid this action could result in physical harm to
the user or hardware.
Document Conventions This guide uses the following document conventions to help you
recognize different types of information.
When a step includes substantial supporting information, the following
document conventions are used to differentiate the supporting
information from the procedural content:
Hardware Conventions
Conventions
Right side of the system — Refers to the right side as you face the
component being described.
Left side of the system — Refers to the left side as you face the
component being described.

Chapter 1: Introduction
Purpose of This Guide
StorNext M330 Metadata Appliance Hardware Guide 5
Software Conventions
Conventions Examples
For all UNIX-based
commands, the #prompt is
implied, although it is not
shown.
TSM_control stop
is the same as
# TSM_control stop
For all UNIX-based
commands, words in
italic
are variables and should be
replaced with user-defined
values.
cvaffinity filename
where filename is a variable
and should be replaced with
a user-defined value.
User input is shown in bold
font.
./install.stornext
Computer output and
command line examples are
shown in monospace font.
./install.stornext
User input variables are
enclosed in angle brackets.
http://<ip_address>/cgi-
bin/stats
For UNIX and Linux
commands, the command
prompt is implied.
TSM_control stop
is the same as
# TSM_control stop
File and directory names,
menu commands, button
names, and window names
are shown in bold font.
/data/upload
Menu names separated by
arrows indicate a sequence
of menus to be navigated.
Utilities > Firmware

Chapter 1: Introduction
Product Safety Statements
6 StorNext M330 Metadata Appliance Hardware Guide
Product Safety Statements
Quantum will not be held liable for damage arising from unauthorized
use of the product. The user assumes all risk in this aspect.
This unit is engineered and manufactured to meet all safety and
regulatory requirements. Be aware that improper use may result in
bodily injury, damage to the equipment, or interference with other
equipment.
WARNING: Before operating this product, read all instructions and
warnings in this document and in the system, safety, and
regulatory guide.

Chapter 1: Introduction
Product Safety Statements
StorNext M330 Metadata Appliance Hardware Guide 7
n

Chapter 1: Introduction
Product Safety Statements
8 StorNext M330 Metadata Appliance Hardware Guide

StorNext M330 Metadata Appliance Hardware Guide 9
Chapter 2
Hardware Overview
This chapter contains the following sections:
•StorNext M330 Components
•StorNext M330 Connectivity on page 24
•Relocating the StorNext M330 System on page 30
StorNext M330 Components
The StorNext M330 Metadata Appliance consists of the following
components:
•StorNext M330 MDC Nodes
•StorNext M330 Metadata Array

Chapter 2: Hardware Overview
StorNext M330 Components
10 StorNext M330 Metadata Appliance Hardware Guide
Figure 1 shows the StorNext M330 System.
Figure 1 StorNext M330
System Components (Front)
StorNext M330 MDC
Nodes
The two StorNext M330 MDC Nodes are servers that provide storage
and control for the StorNext platform software (host OS and StorNext
software). The MDC Nodes contain redundant hard drives in a RAID 1
configuration, ensuring high availability of the system software.
MDC Node - Front View
Figure 2 shows, and Tab l e 1 describes the indicators and buttons on the
front of the StorNext M330 MDC Node.

Chapter 2: Hardware Overview
StorNext M330 Components
StorNext M330 Metadata Appliance Hardware Guide 11
Figure 2 StorNext M330 MDC
Node – Front View
Table 1 StorNext M330 MDC
Node – Front View Indicators
and Buttons
StorNext
Software Empty Drive Slots
Item
Indicators and
Buttons Description
1Service tag The slide-out tab for the system information including information
such as the Service Tag and Express Service Code.
2Power-On Indicator The power-on indicator lights when the system power is on.
The power button controls the DC power supply output to the
system. When the system bezel is installed, the power button is not
accessible.
3LCD panel The LCD panel shows the system ID, status information, and system
error messages.
The LCD lights blue during normal system operation. When the
system needs attention, the LCD lights amber, and the LCD panel
displays an error code, followed by descriptive text.
Note: If the system is connected to AC power and an error has been
detected, the LCD lights amber, regardless of whether the system
has been powered on.

Chapter 2: Hardware Overview
StorNext M330 Components
12 StorNext M330 Metadata Appliance Hardware Guide
MDC Node - Hard Drive Indicator Patterns
The two hard drives located on the front of each MDC Node (in drive
bays 0 and 1) are used to store the (operating system and StorNext
software). Drive bays 2 through 7 are empty, and reserved for Quantum
use. Unlabeled indicators, connectors, and buttons are reserved for
Quantum Service.
For more information, see MDC Node - Hard Drive Indicator Patterns on
page 12.
Figure 3 StorNext M330 MDC
Node – Hard-Drive Indicator
Patterns
1Hard-drive activity indicator (green)
2Hard-drive status indicator (green or amber)
1
2

Chapter 2: Hardware Overview
StorNext M330 Components
StorNext M330 Metadata Appliance Hardware Guide 13
Table 2 StorNext M330 MDC
Node – Hard-Drive Activity and
Status Indicators
MDC Node - Rear View
The back of each StorNext M330 MDC Node has a series of indicators,
connectors, and buttons. Unlabeled indicators, connectors, and buttons
are reserved for Quantum Service.
Figure 4 shows the rear indicators, connectors, and buttons of the
system.
Drive-Status Indicator Pattern
(RAID Only) Condition
Blinks green two times per second Identify drive/preparing for removal.
Off Drive ready for insertion or removal.
Note: When system power is applied, the drive status
indicator remains off until all hard drives are
initialized. Drives are not ready for insertion or
removal during this time.
Blinks green, amber, and off Predicted drive failure.
Blinks amber four times per second Drive failed
Blinks green slowly Drive rebuilding
Steady green Drive online

Chapter 2: Hardware Overview
StorNext M330 Components
14 StorNext M330 Metadata Appliance Hardware Guide
Figure 4 StorNext MDC Node
– Rear View
See Table 3 for information on the labeled components.
M330 MDC Node
Item
Indicator, Connector
and Button Icon Description
1PCIe slot 1 2-port 8Gb FC HBA
2PCIe slot 2 Reserved
3PCIe slot 3 Reserved
4PCIe slot 4 2-port 6Gb SAS HBA
5iDRACport Reserved for Quantum Service
6Ethernet Service port Reserved for Quantum Service
7Ethernet Port 2
connectors
(3 configurable ports)
(Customer-Facing) DLC or management
8Power supply 1 (PS1) 870-W or 570-W Power Supply
9Power supply 2 (PS2) 870-W or 570-W Power Supply

Chapter 2: Hardware Overview
StorNext M330 Components
StorNext M330 Metadata Appliance Hardware Guide 15
MDC Node – NIC Indicator Codes
Figure 5 shows the StorNext M330 MDC Node NIC indicator codes.
Figure 5 MDC Node – NIC
Indicators
1Link indicator
2Activity indicator
12
Indicator Status Indicator Code
Link and activity indicators are off. The NIC is not connected to the network.
Link indicator is green. The NIC is connected to a valid network link at 1000 Mbps.
Link indicator is amber. The NIC is connected to a valid network link at less than the
maximum port speed (10/100 Mbps).
Activity indicator is blinking green. Network data is being sent or received.

Chapter 2: Hardware Overview
StorNext M330 Components
16 StorNext M330 Metadata Appliance Hardware Guide
MDC Node – Power Supply Indicator Codes
This section describes the StorNext M330 MDC Node power supply
indicator codes (see Figure 6). The power supply indicators show if
power is present, or if a power fault has occurred.
Figure 6 MDC Node - Power
Supply Indicator
Ta b l e 3 Power Supply Status
Indicator
Indicator Status Indicator Code
Not lit AC power is not connected.
Green In standby mode, a green light indicates that a valid AC
source is connected to the power supply, and that the power
supply is operational.
When the system is on, a green light also indicates that the
power supply is providing DC power to the system.
Amber Indicates a problem with the power supply.