Quectel SC20-CE User manual

Key Benefits
Quectel SC20
Multi-mode Smart LTE Module
with Wi-Fi & Bluetooth
SC20 series is Quectel’s new generation of multi-mode Smart
LTE Cat.4 modules with built-in Android 5.1 Lollipop OS. It sup-
ports short-range wireless communication via Wi-Fi 802.11b/g/n
and BT4.1 LE, and offers data rate up to 150Mbps. It is ideal for
both industrial and consumer applications requiring the highest
data-rate and high-speed internet access.
SC20 series comes in five variants: SC20-CE, SC20-E, SC20-A,
SC20-AU and SC20-J. This makes it backward-compatible with
existing EDGE and GSM/GPRS networks, ensuring that it can
be connected even in remote areas devoid of 3G or LTE cover-
age.
SC20 features multiple-input multiple-output (MIMO) technology,
a cutting edge antenna technology capable of transmitting multi-
ple data streams on multiple transmitters to multiple receivers.
The antennas at each end of the communications circuit are
combined to minimize errors and optimize data speed. The
module also combines high-speed wireless connectivity with
embedded multi-constellation and high-sensitivity GPS+
GLONASS+BeiDou receiver for positioning.
A rich set of interfaces (such as LCM, Camera, Touch Panel,
MIC, SPK, UART, USB, I2C) and abundant drivers (USB driv-
ers for Windows XP, Windows Vista, Windows 7, Windows
8/8.1, Linux) extend the applicability of the module to a wide
range of M2M applications, such as CPE, wireless POS, smart
metering, router, data card, automotive, smart phone, digital
signage, alarm panel, security and industry PDA.
Smart LTE
LCC Package
Android 5.1 Powerful Multimedia
Function
GPS+GLONASS
+BeiDou
USB 2.0 High Speed
Interface
Quectel Enhanced
AT Commands
USB Drivers
Integrates Android OS, Wi-Fi, Bluetooth and GNSS into one
module
Worldwide LTE, UMTS/HSPA+ and GSM/GPRS/EDGE cov-
erage
MIMO technology meets demands for data rate and link
reliability in modem wireless communication systems
Multi-constellation GNSS receiver available for applications
requiring fast and accurate fixes in any environment
LCC package ensures reliable connectivity with applications
Max. 42Mbps (DL)
Max. 5.76Mbps (UL)
LTE
Smart LTE Cat.4 Module
Max. 150Mbps (DL)
Max. 50Mbps (UL)

General Features
Frequency Bands SC20-CE
FDD LTE: B1/B3/B8
TDD LTE: B38/B39/B40/B41
TDSCDMA: B34/B39
EVDO/CDMA: BC0
WCDMA: B1/B8
GSM: 900/1800MHz
SC20-E*
FDD LTE: B1/B3/B5/B7/B8/B20
TDD LTE: B38/B40/B41
WCDMA: B1/B5/B8
GSM: 850/900/1800/1900MHz
SC20-A*
FDD LTE: B2/B4/B5/B7/B12/B13/B25/B26
WCDMA: B1/B2/B4/B5/B8
GSM: 850/1900MHz
SC20-AU*
FDD LTE: B1/B3/B5/B7/B8/B28
TDD LTE: B40
WCDMA: B1/B2/B5/B8
GSM: 850/900/1800/1900MHz
SC20-J*
FDD LTE: B1/B3/B8/B18/B19/B26
TDD LTE: B41
WCDMA: B1/B6/B19
OS Android 5.1
LTE Version 3GPP E-UTRA Release 11
Bandwidth 1.4/3/5/10/15/20MHz
Antenna DL MIMO 2×2, supports Rx-diversity
Supply Voltage Range 3.5V ~ 4.2V, 3.8V Typ.
Operation Temperature -40°C ~ +85°C
Dimensions 40.5mm × 40.5mm × 2.8mm
Package LCC
Weight Approx. 9.8g
Control via AT Commands 3GPP TS27.007 and enhanced AT commands
Electrical Characteristics
Output Power Class 3 (23dBm±2dB) for LTE FDD bands
Class 3 (23dBm±2dB) for LTE TDD bands
Class 3 (24dBm+1/-3dB) for WCDMA bands
Class 2 (24dBm+1/-3dB) for TD-SCDMA bands
Class 3 (24dBm+3/-1dB) for CDMA BC0
Class 4 (33dBm±2dB) for EGSM900
Class 1 (30dBm±2dB) for DCS1800
Class E2 (27dBm±3dB) for EGSM900 8-PSK
Class E2 (26dBm±3dB) for DCS1800 8-PSK
Consumption 20uA @Power off
3mA @Sleep, Typ.
Sensitivity
(10MHz for LTE)
LTE FDD B1: -102dBm
LTE FDD B2: -101dBm
LTE FDD B3: -101dBm
LTE FDD B4: -101dBm
LTE FDD B5: -101dBm
LTE FDD B7: -100dBm
LTE FDD B8: -101dBm
LTE FDD B12: -100dBm
LTE FDD B13: -100dBm
LTE FDD B18: -100dBm
LTE FDD B19: -100dBm
LTE FDD B20: -99dBm
LTE FDD B25: -99dBm
LTE FDD B26: -99dBm
LTE FDD B28: -99dBm
LTE TDD B38: -100dBm
LTE TDD B39: -101dBm
LTE TDD B40: -100dBm
LTE TDD B41: -100dBm
WCDMA B1: -110dBm
WCDMA B2: -110dBm
WCDMA B4: -110dBm
WCDMA B5: -112dBm
WCDMA B6: -110dBm
WCDMA B8: -110dBm
WCDMA B19: -110dBm
TD-SCDMA: -108dBm
CDMA/EVDO: -109dBm
GSM 850: -110dBm
GSM 900: -109dBm
GSM 1800: -109dBm
GSM 1900: -108dBm
HQ address: Office 501, Building 13, No.99,
Tianzhou Road, Shanghai, China 200233
Tel: [phone]
Fax: [phone]
Email: [email protected]
Interfaces
LCM 4-lane MIPI_DSI, up to 1.5Gbps for each
HD (720P) @60fpbs
Camera Use MIPI_CSI, up to 1.5Gbps per lane
Support two cameras:
2-lane MIPI_CSI for rear camera, up to 8MP
1-lane MIPI_CSI for front camera, up to 2MP
Touch Panel Capacitive-screen
Audio MP3, AAC, AAC+, eAAC, AMR-NB, - WB, G.711,
WMA 9/10 Pro
Video Encode: 30fps 720P (H.264), 30fps WVGA (MPEG-4/VP8)
Decode: 30fps 1080P (H.264/MPEG-4/VP8/H.265
DivX4/5/6), 30fps WVGA (H.263)
USB 2.0 Device ×1, high Speed, 480Mbps
I2C ×3
USIM ×2, support 1.8/2.95V
GPIO ×25
UART ×2, high-speed UARTs
SDIO ×1, 3.0, 4bit SDIO
PWRKEY
Antenna 4 pads for Main Antenna, Diversity Antenna, GNSS Antenna
and Wi-Fi/BT Antenna, respectively
ADC ×3 (BAT_SNS, BAT_THERM, ADC)
Quectel SC20
Multi-mode Smart LTE Module
with Wi-Fi & Bluetooth
* Under development
Specifications
Data LTE LTE-FDD Max 150Mbps (DL) Max 50Mbps (UL)
LTE-TDD Max 130Mbps (DL) Max 35Mbps (UL)
DC-HSPA+ Max 42Mbps (DL) Max 5.76Mbps (UL)
WCDMA Max 384Kbps (DL) Max 384Kbps (UL)
TD-SCDMA Max 4.2Mbps (DL) Max 2.2Mbps (UL)
EDGE Max 236.8Kbps (DL) Max 236.8Kbps (UL)
GPRS Max 85.6Kbps (DL) Max 85.6Kbps (UL)
Voice Speech Codec Modes HR, FR, EFR, AMR, AMR-WB
Echo Arithmetic Echo Cancellation
Noise Reduction
VoLTE Analog Audio and VoLTE (Voice over LTE)
(Optional)
Special Features
Firmware Update Firmware updated via USB
WLAN 2.4G, 802.11 b/g/n (SC20-CE)
2.4G/5.8G, 802.11 a/b/g/n (SC20-E/-A/-AU/-J)*
BT BT2.1+EDR/3.0/4.1 LE
GNSS GPS/GLONASS/BeiDou
40.5 mm
40.5mm 2.8mm
Copyright ©2016 Quectel Wireless Solutions Co., Ltd. All Rights Reserved http://www.quectel.com
Certification
Approval CCC/CE*/FCC*/GCF*/PTCRB*/AT&T*/ACMA RCM*/Verizon*

Smart EVB User Guide
LTE Module Series
Rev. Smart_EVB_User_Guide_V1.0
Date: 2016-09-30
www.quectel.com

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 1 / 29
Our aim is to provide customers with timely and comprehensive service. For any
assistance, please contact our company headquarters:
Quectel Wireless Solutions Co., Ltd.
Office 501, Building 13, No.99, Tianzhou Road, Shanghai, China, 200233
Tel: [phone]
Email: [email protected]om
Or our local office. For more information, please visit:
http://www.quectel.com/support/salesupport.aspx
For technical support, or to report documentation errors, please visit:
http://www.quectel.com/support/techsupport.aspx
Or email to: [e-mail]
GENERAL NOTES
QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION
PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT
TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT
MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT
ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR
RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO
CHANGE WITHOUT PRIOR NOTICE.
COPYRIGHT
THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF
QUECTEL CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS
DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT
PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS
ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL
OR DESIGN.
Copyright © Quectel Wireless Solutions Co., Ltd. 2016. All rights reserved.
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 2 / 29
About the Document
History
Revision
Date
Author
Description
1.0
2016-09-30
Vae LIU
Initial
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 3 / 29
Contents
About the Document...................................................................................................................................2
Contents.......................................................................................................................................................3
Table Index...................................................................................................................................................4
Figure Index.................................................................................................................................................5
1Introduction..........................................................................................................................................6
1.1. Safety Information ...................................................................................................................7
2General Overview.................................................................................................................................8
2.1. Key Features ...........................................................................................................................8
2.2. Interface Overview...................................................................................................................9
2.3. EVB View............................................................................................................................... 11
2.4. EVB Accessories ................................................................................................................... 11
3Interface Application .........................................................................................................................13
3.1. Power Interface .....................................................................................................................13
3.2. USB Device Interface............................................................................................................14
3.3. Audio Interface ......................................................................................................................15
3.3.1. Loud Speaker.................................................................................................................15
3.3.2. Earphone........................................................................................................................16
3.3.3. MIC and Speaker ...........................................................................................................17
3.4. USIM Card Interfaces............................................................................................................18
3.5. UART Interfaces....................................................................................................................19
3.6. Switches and Buttons............................................................................................................20
3.7. Status LEDs...........................................................................................................................22
3.8. Test Points.............................................................................................................................23
4Operation Procedure.........................................................................................................................25
4.1. Power ON..............................................................................................................................25
4.2. Power OFF ............................................................................................................................25
4.3. Reset .....................................................................................................................................26
4.4. Communication Via USB or UART Interface.........................................................................26
4.4.1. Communication via USB Interface.................................................................................26
4.4.2. Communication via UART Interface...............................................................................26
4.5. Firmware Upgrade.................................................................................................................27
5EVB Accessories Assembly .............................................................................................................28
6Appendix A Reference.......................................................................................................................29
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 4 / 29
Table Index
TABLE 1: FEATURES OF SMART EVB.............................................................................................................. 8
TABLE 2: INTERFACES OF SMART EVB.......................................................................................................... 9
TABLE 3: ACCESSORIES LIST .........................................................................................................................11
TABLE 4: PIN ASSIGNMENT OF USB DEVICE INTERFACE J602................................................................. 15
TABLE 5: PIN ASSIGNMENT OF J702 ............................................................................................................. 16
TABLE 6: PIN ASSIGNMENT OF USIM CARD................................................................................................. 19
TABLE 7: PIN ASSIGNMENT OF J901............................................................................................................. 20
TABLE 8: DESCRIPTION OF SWITCHES AND BUTTONS ............................................................................. 21
TABLE 9: DESCRIPTION OF STATUS LEDS................................................................................................... 22
TABLE 10: DETAILS OF TEST POINTS ........................................................................................................... 23
TABLE 11: RELATED DOCUMENTS ................................................................................................................ 29
TABLE 12: TERMS AND ABBREVIATIONS...................................................................................................... 29
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 5 / 29
Figure Index
FIGURE 1: INTERFACE OVERVIEW ................................................................................................................. 9
FIGURE 2: EVB TOP VIEW ...............................................................................................................................11
FIGURE 3: EVB ACCESSORIES...................................................................................................................... 12
FIGURE 4: SIMPLIFIED POWER SUPPLY SCHEMATIC ................................................................................ 13
FIGURE 5: POWER INTERFACE ..................................................................................................................... 14
FIGURE 6: USB INTERFACE CIRCUIT............................................................................................................ 14
FIGURE 7: LOUD SPEAKER CIRCUIT ............................................................................................................ 15
FIGURE 8: EARPHONE CIRCUIT .................................................................................................................... 16
FIGURE 9: PIN ASSIGNMENT OF J702........................................................................................................... 16
FIGURE 10: THE SKETCH OF AUDIO JACK................................................................................................... 17
FIGURE 11: MIC AND SPEAKER CIRCUIT...................................................................................................... 17
FIGURE 12: SCHEMATIC OF SIMPLIFIED USIM CARD INTERFACES......................................................... 18
FIGURE 13: PINS ASSIGNMENT OF USIM CARD HOLDER.......................................................................... 18
FIGURE 14: UART BLOCK DIAGRAM ............................................................................................................. 19
FIGURE 15: MAIN UART PORT (J901) ............................................................................................................ 20
FIGURE 16: SWITCHES AND BUTTONS ........................................................................................................ 21
FIGURE 17: STATUS LEDS.............................................................................................................................. 22
FIGURE 18: PINS ASSIGNMENT OF J904 ...................................................................................................... 23
FIGURE 19: MENU ON LCM ............................................................................................................................ 25
FIGURE 20: SELECT THE USB PORT TO UPDATE FIRMWARE................................................................... 27
FIGURE 21: SMART EVB AND ACCESSORIES ASSEMBLY.......................................................................... 28
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 6 / 29
1Introduction
This document describes the evaluation board of Quectel SC20 Smart module series. The Smart
evaluation board is an assistant system integrator for developing and evaluating products based on
Quectel Smart modules.
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 7 / 29
1.1. Safety Information
The following safety precautions must be observed during all phases of the operation, such as usage,
service or repair of any cellular terminal or mobile incorporating Quectel module. Manufacturers of the
cellular terminal should send the following safety information to users and operating personnel, and
incorporate these guidelines into all manuals supplied with the product. If not so, Quectel assumes no
liability for customer’s failure to comply with these precautions.
Full attention must be given to driving at all times in order to reduce the risk of an
accident. Using a mobile while driving (even with a handsfree kit) causes
distraction and can lead to an accident. You must comply with laws and regulations
restricting the use of wireless devices while driving.
Switch off the cellular terminal or mobile before boarding an aircraft. Make sure it is
switched off. The operation of wireless appliances in an aircraft is forbidden, so as
to prevent interference with communication systems. Consult the airline staff about
the use of wireless devices on boarding the aircraft, if your device offers an
Airplane Mode which must be enabled prior to boarding an aircraft.
Switch off your wireless device when in hospitals, clinics or other health care
facilities. These requests are desinged to prevent possible interference with
sensitive medical equipment.
Cellular terminals or mobiles operating over radio frequency signal and cellular
network cannot be guaranteed to connect in all conditions, for example no mobile
fee or with an invalid SIM card. While you are in this condition and need emergent
help, please remember using emergency call. In order to make or receive a call,
the cellular terminal or mobile must be switched on and in a service area with
adequate cellular signal strength.
Your cellular terminal or mobile contains a transmitter and receiver. When it is ON,
it receives and transmits radio frequency energy. RF interference can occur if it is
used close to TV set, radio, computer or other electric equipment.
In locations with potentially explosive atmospheres, obey all posted signs to turn
off wireless devices such as your phone or other cellular terminals. Areas with
potentially explosive atmospheres include fuelling areas, below decks on boats,
fuel or chemical transfer or storage facilities, areas where the air contains
chemicals or particles such as grain, dust or metal powders, etc.
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 8 / 29
2General Overview
Quectel supplies Smart EVB kit for testing basic functionalities on Smart modules.
2.1. Key Features
Smart EVB offers the following features:
Two USIM interfaces
Two UART interfaces
Multiple audio interface
USB interface
Keypads and LED indication lights
Table 1: Features of Smart EVB
Features
Implementation
Power Supply
USB supply voltage: 4.75~6.0V; typical supply voltage: 5.0V
VBAT supply voltage: 3.5~4.3V; typical supply voltage: 3.8V
USIM Interfaces
Support card detection
Support USIM/SIM cards: 3.0V and 1.8V
Audio Interface
Analog interface used for loud speaker, microphone, earphone and
handset
UART Interfaces
Two UART interfaces:
Main UART for data transmission
Debug UART for debugging
Max. baud rate: 460800bps
USB Interface
USB 2.0, support high speed and OTG function
Signal Indication
4 LEDs are available for signal indication
Buttons
9 buttons
Switches
4 switches
Physical Characteristics
Size: 24cm ×18cm
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 9 / 29
2.2. Interface Overview
Figure 1: Interface Overview
Table 2: Interfaces of Smart EVB
Interface
Reference Number
Description
VBAT
J801
Connector used for battery
Power Switch
S801
Switch for battery and DC_POWER
S803
Control power ON/OFF
PWRKEY
S901
PWRKEY push button
It’s used to turn on/off the module.
J903
Jumper is used to connect PWRKEY to GND
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 10 / 29
Some of these functions may not be supported on some modules. For details, please refer to relative
module reference designs and hardware designs.
RESET
S908
Reset push button. It’s used to reset the module.
Micro USB
J602
USB device interface
USB_VBUS supply voltage: +5.0V
Audio
Speaker
Loud speaker
Earphone
Earphone
MIC
Microphone
J702
Headset
USIM
J503
Main USIM card holder
J504
Sub USIM card holder
UART
J901
Main UART port
J604
Debug UART port
LEDs
D805, D806, D807,
D808
D805 and D807 indicate network registration mode of
the module.
D806 indicates the power ON/OFF status.
D808 indicates operation status of the module.
TE-A
J101, J102
TE-A module connector
NOTE
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 11 / 29
2.3. EVB View
Figure 2: EVB Top View
2.4. EVB Accessories
All the items of EVB kit are listed in table and figure below. Please contact the supplier if there is
something missing.
Table 3: Accessories List
Items
Description
Quantity
Cables
USB to UART converter cable
1
USB cable
1
RF cable
4
Antennas
Main antenna
2
WiFi antenna
1
Smart
Module
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 12 / 29
Figure 3: EVB Accessories
The main antenna can also be used for diversity reception.
GNSS antenna (passive)
1
Audio
Earphone
1
Disk
USB2.0 to RS232 driver and USB driver disk
1
Battery
Li-polymer battery
1
Other
Bolts and nuts for fixing EVB
1
NOTE
USB to UART converter cable
Li-polymer battery
Earphone
Main antenna
Driver disk
WiFi antenna
GNSS antenna
Bolts and nuts
USB cable
RF cable
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 13 / 29
3Interface Application
This chapter describes the hardware interfaces of Smart EVB, shown as follows:
Power interface
USB interface
Audio interface
USIM card interfaces
UART interfaces
It also provides information about LEDs, buttons and test points to help customers use the Smart EVB.
3.1. Power Interface
The power supply of Smart EVB could come from the external input which is connected with USB
receptacle. The USB receptacle is connected with a step-down converter to provide the supply voltage
(VBAT) required for operating the module.
The following figures show the simplified power supply schematic and the power interface of Smart EVB.
Power ON/OFF
down converter
Power supply to
the module
J602
USB
interface
Step-
U801
DCDC
S801
J801
VBAT
interface
S803
Power switch
Figure 4: Simplified Power Supply Schematic
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 14 / 29
Figure 5: Power Interface
3.2. USB Device Interface
The Smart EVB provides a USB 2.0 interface which complies with USB 2.0 standard and supports OTG
function. It is used for AT command communication, data transmission, firmware upgrade and GNSS
NEMA output.
Meanwhile, Smart EVB provides a micro-USB receptacle J602 to connect with a host device. The
USB_DP and USB_DM data lines are connected directly to the module. The schematic of the USB
interface is shown in the following figure and the pin assignment of the J602 is listed in the table below.
Figure 6: USB Interface Circuit
J602
USB 5V
J801
VBAT
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 15 / 29
Table 4: Pin Assignment of USB Device Interface J602
3.3. Audio Interface
Smart module provides a digital audio interface (PCM). The analog interface J702 on the Smart EVB is
used for loud speaker, earphone and microphone.
3.3.1. Loud Speaker
Loud speaker is soldered via TP701 and TP702. The following figure shows the loud speaker circuit.
SPK_P
SPK_N
10pF
10pF 33pF
33pF
Close to speaker
GND
GND
ESD
ESD
FB
FB
Smart EVB
Figure 7: Loud Speaker Circuit
J602
Pin Name
Function
1
USB_VBUS
This pin is used for USB detection and power supply.
2
USB_DM
USB serial differential bus (minus)
3
USB_DP
USB serial differential bus (positive)
4
USB_ID
USB serial ID signal
5
GND
GND for USB interface
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 16 / 29
3.3.2. Earphone
An earphone can be used in audio interface J702. The following figures and table show the circuit of J702
audio interface for earphone and pin assignment of J702.
Figure 8: Earphone Circuit
Figure 9: Pin Assignment of J702
Table 5: Pin Assignment of J702
J404
Pin Name
Function
1
MIC
Positive microphone input
2
GND
Dedicated GND for audio
3
R-AUDIO
Earphone right channel
1
2
3
6
4
5
Quectel
Confidential

LTE Module Series
Smart EVB User Guide
Smart_EVB_User_Guide Confidential / Released 17 / 29
The following figure shows the sketch of audio jack which matches the Smart EVB.
2
1
MIC
GND
SW
SPK_R
SPK_L
3
4
32Ω
32Ω
Figure 10: The Sketch of Audio Jack
3.3.3. MIC and Speaker
SMT U701 MIC is used for microphone and speaker is soldered on TP703 and TP704. The following
figure shows the schematic of the MIC and Speaker.
ESD
33pF
ESD
ESD ESD
33pF
33pF33pF
100pF
100pF
MIC1_P
MIC1_N
EAR_P
EAR_N
FB
EVB
MIC_BIAS
HPH_R
HPH_L
U701 MIC
TP703
TP704 REC
Figure 11: MIC and Speaker Circuit
4
DETECT
Earphone detection
5
L-AUDIO
Earphone left channel
6
GND
Dedicated GND for audio
Quectel
Confidential