QuickWorldWide Little Sweetie 10 Pro Quick guide

Page 1 of 69

Page 2 of 69
TABLE OF CONTENTS
INTRODUCTION 3
CUSTOMER SERVICE 4
FEATURES 5
FRE-ASSEMBLY INFORMATION 6
REQUIRED TOOLS 7
HARDWARE & OPTIONAL ACCESSORIES 8
OTHER HARDWARE & OPTIONAL ACCESSORIES 9
OTHER REQUIREMENTS 11
PART LIST 12
SECTION 1: REAR FRAMES 13
SECTION 2: MAIN FRAMES 17
SECTION 3: TAIL ASSMEBLY 32
SECTION 4: CONTROL SYSTEM 39
SECTION 5-A: ROTOR HEAD FOR LITTLE SWEETIE 10 42
SECTION 5-B: ROTOR HEAD FOR SWEET 16V2 47
SECTION 6: LINKAGES 50
SECTION 7: SETTINGS 56
FRE-LIGHT CHECKS 63
WARNINGS 63
ADJUSTMENTS 64
HOW TO HOVER 65
HOW TO FLY FORWARD 67
AFTER FLIGHT CHECKS 69
WHAT IF THE HELICOPTER CRASHED 69
SPECIFICTION 69

Page 3 of 69
INTRODUCTION
Congratulation and thank you for purchasing this great product! It is our sole desire for you
to enjoy the quality workmanship and performance of any of our electric Li-Po powered
helicopters. We believe we have the latest designs and technology incorporated into our
model helicopters. Our CNC parts are produced using the best high density materials &
anodized using material hardening finishes with the tightest of tolerances. Our new
helicopters feature the latest advances in R/C helicopter design. The simple and
mechanically superior EMS design (also known as CCPM) ensures a helicopter that will be
more responsive and more stable than any other R/C helicopter you have ever flown. Three
servos are attached directly to the Swashplate to ensure precise control. This kit features all
metal construction, and a carbon or composite frames are standard. Along with great
products, our staffs are RC people that fly and have hands on experience with total
manufacturing & testing of our helicopters. In addition, we stand behind all our products
100% with satisfaction guaranteed.
For the past several years, we have been devoting ourselves to developing electric powered
helicopters. We feel that our electrics now are more powerful, smoother, and more
responsive than most of the nitro machines in the market. In addition, there is less time for
maintenance and no longer getting dirty from oil and gas. With new technology of batteries
and electric motors, the flying time and the efficiency increase significantly day by day. We
believe so much in our electric helicopters that we have given out for reviews to our fellow
hobbyists EP kits of four different motors and Li-Po battery classes. Electric powered
helicopters are here now to stay and will in time be bigger than the current nitro market. The
market has some very mixed ideas about electric and their safety. Our staff is here to
answer all of your technical questions. Our kits will be shipped 100% complete and we can
assure you that once you fly your EP helicopter you will love it.
The Little Sweetie 10 / Sweet 16V2
We believe you hold in your hands one of the best helicopters manufactured in the world
today. The brand new Little Sweetie 10 & Sweet 16V2 are the newest
designs of our Quick line. These babies carry the power and punch of the Q30 delivered
smoothly throughout the entire range of their electric motor. The Little Sweetie 10
& Sweet 16V2 Pro version feature a fully machined head, metal grips,
carbon fiber frames, and carbon fiber boom supports. The Little Sweetie 10 &
Sweet 16V2 Sport version features a G10 fiberglass frame, and molded
main blade grips and tail blade grips. Our helicopters are carefully designed and tested, and
manufactured of the highest quality materials available.
In a short time, you can be flying.
We ask that you please read the entire manual before starting the construction of the
Little Sweetie 10 & Sweet 16V2, and if you have any questions our
technical support staff can be reached at
[phone] M-F 9-6, S 9-4 Eastern time,
or by email at [email protected].
For the latest information and updates, please visit our website at
www.quickworldwide.com

CUSTOMER SERVICE
Quickworldwide
201 South 3rd. St. & 309 N.
Coopersburg, PA 18036
Phone: [phone]
Fax: [phone]
Websites:
http://www.hhiheli.com
http://www.quickheli.com
http://www.giantscaleplanes.com
E-mail: [email protected]
Office Hours: Mon – Fri: 8:30 – 6:00
Sat: 8:30 – 1:30
(Eastern Daylight Time)
Technical Support Personnel:
Chuck – [email protected]
Jon – [email protected]
Page 4 of 69

Page 5 of 69
FEATURES
Little Sweetie 10 & Sweet 16V2
1. Frame Construction: Little Sweetie 10 / Sweet 16v2 frames are made of the
highest quality Carbon Fiber or Black G-10. These frames are not only rigid but will
provide excellent vibration absorption.
2. Belt driven Tail: Smooth, reliable, and low maintenance.
3. High Quality Ball Bearings: Little Sweetie 10 / Sweet 16v2 offer ball
bearings on all moving parts.
4. EMS Collective System:The EMS Collective design allows ease of setup
with fewer moving parts. EMS demonstrates overall design simplicity and represents the
future of helicopter technology.
5. Control Linkages: The control linkages provided with the Quick Learner Kit
are high quality 2.3mm stainless steel rods with Delrin® acetal resin rod ends.
6. Single Blade Axle Design: simple, very responsive, with exceptionally
consistent flight characteristics.
7. Advanced Airfoil Fly-bar Paddles: These paddles will provide the best
flight characteristics for both 3D & Sport flying: Smooth forward flight, with quick
response upon demand.
8. Low Cost: Little Sweetie 10 / Sweet 16v2 have low cost replacement parts.

Page 6 of 69
PRE-ASSEMBLY INFORMATION
Warning
The radio-controlled model helicopter contained in this kit is not a toy.
Rather, it is a sophisticated piece of equipment. This product is not recommended for
use by children without adult supervision. Radio controlled models such as this are
capable of causing both property damage and/or bodily harm to both the
operator/assembler and spectators if not properly assembled and operated. Hobbies &
Helis International assumes no liability for damage that could occur from the mis-
assembly and/or use/misuse of this product.
Academy of Model Aeronautics
We strongly encourage all prospective and current R/C aircraft pilots to join the
Academy of Model Aeronautics. The AMA is a non-profit organization that provides
services to model aircraft pilots. As an AMA member, you will receive a monthly
magazine entitled Model Aviation, as well as a liability insurance plan to cover against
possible accident or injury. All AMA charter aircraft clubs require individuals to hold a
current AMA sporting license prior to the operation of their model. For further information,
please contact AMA at:
Academy of Model Aeronautics
5161 East Memorial Drive
Muncie, IN 47302-9252
USA
Phone: [phone]
www.modelaircraft.org
Before you begin
Quick Helicopter kits are packaged with care and attention to detail. We recommend
when you are ready to begin building this model that you examine the kit carefully,
inspect the contents of each package, and read and understand these instructions
thoroughly before starting assembly. It is suggested that you purchase a parts box for
the small fasteners and hardware, or use small bowls or other containers.

Page 7 of 69
REQUIRED TOOLS
Dremel Tools and Sandpapers would be helpful for building.

HARDWARE & OPTIONAL ACCESSORIES
GLUES AND THREAD LOCK COMPOUNDS
RADIO MOUNTING ACCESSORIES
Page 8 of 69

OTHER HARDWARE & OPTIONAL ACCESSORIES
3MM FLYBAR STIFFENERS
HHI 402
30 SIZE SKID STOPS
HHI 200 AVAILABLE IN COLORS
SERVO ARM SET
LANDING GEAR DAMPENERS
HHI 2004
BASE LOAD ANTENNA
HHI 53**
AVAILABLE IN BLUE, GOLD,
PURPLE
AND IN 40, 50, AND 72 MHz
Page 9 of 69

FINISHING CAPS
•Adds color and style
•Distributes force across larger surface area
3mm 4mm
(20 pcs in a package) (8 pcs in a package)
BLACK HHIM11100B ---
W
ITHOUT BLUE HHIM11103 HHIM11108
GOLD HHIM11101 HHIM11106
GREEN HHIM11100G ---
PURPLE HHIM11100 HHIM11105
W
ITH RED HHIM11100R ---
SILVER HHIM11100 HHIM11107
Page 10 of 69

Page 11 of 69
OTHER REQUIREMENTS
Radios:
Any radio that supports EMS/CCPM Mixing will work fine. Hobbies & Helis
International & its distributors carry various lines of helicopter radios.
Note: Please consult the instruction for your Gyro for setting the overall travel
and limits to ensure proper operation and travel of Tail Pitch Slider.
Servos:
Any sport servo will offer acceptable performance. However, because servos
operate all critical functions of the helicopter, they can be the single most
important component that contributes to proper function of the helicopter. Due to
the nature of EMS collective, we suggest the use of digital servos to enhance
and ensure matched servo timing without servo interaction.
Locktite Warning (CRITICAL):
This is a general warning about the use of Locktite and its
importance. Locktite must be used anywhere that a metal
fastener i.e. (M2, M3, M4 Cap Head Bolts, Set Screws etc.) is
threaded into a metal part i.e. (Bearing Blocks, Cross-members,
etc.). Failure to use Locktite can result in loosening of critical
operating components, loss of control of the model, and can
lead to a crash.

Page 12 of 69
PART LIST
•In your kit, parts are bagged according to each major assembly and are labeled “Bag
1, Bag 2, Bag 2-10, etc.” You will note that the heading for each assembly indicates
which bag correlates with each assembly.
•For a good installation, only open up the bag that you need for particular assembly.
•Please check the parts in that bag against the parts list shown for each assembly as
well as each subassembly to make sure there are no missing parts.
•Small parts such as nuts and bolts can be put into containers or trays to prevent
losing parts.
•No. with ***** means that part is not included in the kit.
•Colors of the drawings for parts in this manual may look differently from the real parts
in the kit.
•Check out our website for latest information and updates: www.quickworldwide.com
No. Bag No. Description Quantity Check
1 Frame Frame Bag 1
2 Bag 1 For Rear Frame Assembly 1
3 Bag 2 For Main Frame Assembly 1
4 Bag 2-10 For Landing Gear Assembly 1
5 Bag 3 For Tail Assembly 1
6 Bag 4 Control System 1
7 Bag 5 Rotor Head 1
8 Bag 6 Linkage 1
9 Bag 7 For Settings 1
10 Loose in Box
Tail Boom with End
Timing Belt
Boom Support (only Sweet 16V2)
Standard Flybar
Canopy
Rudder Push Rod
Instruction CD
Decal Sheet
Extra Hardware Bag
Locktite Warning
1
1
2
1
1
1
1
1
1
1
11 HB Hardware Bag 1

Page 13 of 69
ASSEMBLY
SECTION 1: REAR FRAMES Bag 1

Page 14 of 69
1-1 TAIL TRANSMISSION ASSEMBLY
No Bag# Description Qty
1 1 Counter Gear 1
2 1 Counter Gear Shaft 1
3 1 Counter Gear Lock Pin 1
4 1 M4 E-clip 1
5 1 Counter Gear Bearing Block 2
6 1 Pulley Gear Plate 1
7 1 Pulley Gear Block Pin 1
8 1 Pulley Gear 1
9 ***** JP Weld glue 1
-Install Counter Gear to Counter Gear Shaft using Counter
Gear Lock Pin (No. 3) to secure it. Apply JP Weld around
the pin
-Put Counter Gear Bearing Block (Lower one ) in with the
Flange facing down
-Install Counter Gear Bearing Block (Upper one) with the
Flange facing down
-Install Pulley Gear Plate (No. 6)
-Insert Pulley Gear Lock Pin (No. 7). Apply JP Weld
around the pin
-Install Pulley Gear and retain with M4 E-clip
Note: Ensure that the 2 x 10mm pin is seated all the way down in the slot in the Counter Gear. If it
is not seated, it will not allow the Bearing Block to go to the proper position and will bind on the
Pulley or Gear. Counter Gear Shaft is designed to fit tightly in bearings on the Bearing Blocks. So
before you do the following assembly, check to see if the shaft can go in the bearings or not. If
not, use sand paper to sand it down a little, it will come right in.

Page 15 of 69
1-2 RUDDER SERVO ASSEMBLY
No. Bag# Description Qty
1 Frame Rear Frame (from Frame Bag) 1
2***** Servo 1
3 HB* M2.5x14 Cap Head Bolt 4
4 HB M2.5 Locknut 4
5 HB Fixing Plate 2
*HB: Hardware Bag
Note: Servos are not included in the kit. If the servos come with anti-vibrating rubber,
insert them on the servos first. Remember to apply Locktite (see Locktite Warning in the
Other Requirement Section)

Page 16 of 69
1-3 REAR FRAME INSTALLATION
No. Bag# Description Qty No. Bag# Description Qty
1
Step 1-2 1 5 HB M3x35 Cap Head Bolt 4
2 Frame Rear Frame 1 6 HB M3x8 Cap Head Bolt 8
3 Step 1-1 1 7 HB M3 Locknut 4
4 1 Boom Holder 2 8 HB M3x7 Flat Washer 8
Do not tighten four nuts
at Tail Boom Holder
Halves too tight since
you are going to install
the Tail later.
Note: If the holes on the Bearing Blocks do not line up to the ones on the Rear Frame,
just grind the holes on the frames a little bit.

Page 17 of 69
SECTION 2: MAIN FRAMES Bag 2

Page 18 of 69
2-1 ELEVATOR SHAFT BEARINGS
No. Bag# Description Qty
1 Frame Main Frame 2
2 2 5x10x4 Flanged Bearing 2
Note: The holes on the frames are designed for “push-fit” feature. Sometime you may have to
sand them a little bit before pushing the bearings in.

Page 19 of 69
2-2 RIGHT AILERON & ELEVATOR SERVO ASSEMBLY
No. Bag# Description Qty
1 Right Frame from Step 2-1 1
2***** Servo 2
3 HB M2.5x14 Cap Head Bolt 8
4 HB M2.5 Locknut 8
5 HB Fixing Plate 4
Note: Servos are not included in the kit. If the servos come with anti-vibrating rubber,
insert them on the servos first.

Page 20 of 69
2-3 LEFT AILERON SERVO ASSEMBLY
No. Bag# Description Qty
1 Left Frame from step 2-1 1
2***** Servo 1
3 HB M2.5x14 Cap Head Bolt 4
4 HB M2.5 Locknut 4
5 HB Fixing Plate 2
Note: Servos are not
included in the kit. If the
servos come with anti-
vibrating rubber, insert
them on the servos first.
2-4 INNER ELEVATOR CONTROL ARM SUBASSEMBLY
Note: Elevator Control Shaft is designed to
fit tightly in M5x11x4 Flange Bearings on the
Upper Frames. So before you do the following
assembly, check to see if the shaft can go in the
bearings or not. If not, use sand paper to sand it
down a little, it will come right in.
No Bag# Description Qty
1 2 Inner Elevator Control Arm 1
2 2 Elevator Control Shaft 1
3 HB M3x5 Set Screw 1
4 HB M3x7 Pivot Ball Stud 1