RAB Lighting Lightcloud Touch User manual

Welcome
LCTOUCH10
Touch
© RAB Lighting, Inc
170 Ludlow Avenue Northvale, NJ 07647
Custom manufactured in China
1 (844) LIGHTCLOUD
1 [phone]
[email protected]
Lightcloud is a commercial
wireless lighting control system
& service. It’s powerful and
flexible, yet easy to use
and install. Learn more at
lightcloud.com
1 (844) LIGHTCLOUD
1 [phone]
[email protected]
WE’ RE HERE TO HELP:

Lightcloud is a wireless lighting
control service. The Lightcloud
Touch is a wall-mounted 10"
touchscreen tablet that gives
users a convenient and
customizable interface for
controlling a Lightcloud site.
Hello
Product Features
AC-powered for permanent installation
Customizable zone and scene control
Direct local control for minimum latency
Easy setup from your computer or
mobile device—or just call RAB
Patent Pending

Contents
PART NUMBER
LCTOUCH10
INPUT
120VAC, 50/60Hz, 0.3A
OPERATING TEMPERATURE
-10ºC to 40ºC
OPERATING HUMIDITY
10% RH to 95% RH
Specifications
OVERALL DIMENSIONS
11” x 7.8” x 2.3”
WIRELESS RANGE
Line of Sight 1000 feet
Obstructions 100 feet
Warranty is active as long as service
plan is active.
Indoor Rated.
Lightcloud Touch Instruction ManualSix #6-18 x 1” Drywall Screws
What You Need
Lightcloud Gateway
A Lightcloud installation requires
at least one Lightcloud Gateway to
manage your devices.
1 (844) LIGHTCLOUD
1 [phone]
[email protected]
WE ’ RE HERE TO HELP:
Lightcloud Controller
(Or similar Lightcloud actuation device)

Finding a Suitable
Location 2Install the Touch
a. Choose a junction box at which to
install the Touch, keeping in mind
the guidelines from "Finding a
Suitable Location".
b. Ax the bracket to the wall using
the six #6-18 x 1" screws included.
c. Connect hot and neutral wires to
the wires on the back of the Touch
as shown in the “Wiring” section.
d. Hang the touch from the bracket.
1
Lightcloud uses a wireless mesh network
to connect devices such as the Dimmer
to the Gateway. Unlike a WiFi router,
each Lightcloud device may connect
another device to the network. If there
is a clear line of sight between two
Lightcloud devices, they can be placed
up to 1000 feet apart. If the two devices
are separated by ordinary drywall
construction, try to keep them within
100 feet of each other. Brick, concrete
and steel construction may require
additional AC-powered Lightcloud
devices to go around the obstruction.
See the Deployment section of your
Gateway for more information.
Setup & InstallationWiring
BLACK / HOT
WHITE / NEUTRAL
PANEL OFF
WARNING
OFF
Turn o power

Setup & Installation(cont’d)
3Labeling your device
For setup and maintenance, we provide two Lightcloud Device Tables with the Gateway:
one that you can attach to your panel and one to hand o to a building manager. Attach
the Device Identification stickers included with each device to a row, then write in
additional information, such as Zone name, Panel/Circuit Number, and whether or not
a zone uses dimming.
4Enabling your device
DEVI C E IDs
ZONE NAME PA N E L /
CIRCUI T #
4a Turn the Touch on by holding the power button on top.

Setup & Installation(cont’d)
4Enabling your device (cont’d)
4b Call RAB at 1 (844) LIGHTCLOUD, or email us at [email protected],
to add the Touch to your Lightcloud network. 4c Once the Touch has joined your network, you'll see the screen below.

Functionality
All Lightcloud products can be commissioned and configured by:
• Logging on to lightcloud.com
• Calling RAB at 1 (844) LIGHTCLOUD
• Emailing us at [email protected]
Configure
1 (844) LIGHTCLOUD
1 [phone]
[email protected]
1Configuring the Touch by calling or emailing RAB
2Configuring the Touch using the web/mobile application
Navigate to https://control.lightcloud.com and log in.
2a

Functionality(cont’d)
2Configuring the Touch using the web/mobile application (cont’d)
Click the menu icon in the top left.
2b Navigate to your Site, then click Devices.
2c
Find your Touch device in the Device List on the left
2d

Functionality(cont’d)
2Configuring the Touch using the web/mobile application (cont’d)
Within a few seconds, the tablet UI refreshes to reflect our changes.
2f
Click the icon to add zone and/or
scene controls to your Touch.
2e In this example, we've configured our
Touch to control two zones and one scene:

FCC Information:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This device has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try and correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To comply with FCC RF exposure limits for general population/uncontrolled exposure, this transmitter must be installed to
provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
CAUTION: Changes or modifications to this equipment not expressly approved by RAB Lighting, Inc. may void the user’s
authority to operate this equipment.