C
B
A
B
D
E
FGHI J
C
B
A
B
D
E
FGHI J
Product Diagrams and Contents of Product Package
Precautions Before Application
After you open the outer package, make sure that the following items are contained
in the package:
Please check the product and accessories for any defect or missing parts. If you have
any questions, please contact your product supplier.
Please visit the official website (www.raidon.com.tw) to download user manuals, drivers
and other related resources.
˙
˙
HDD/SSD Tray & Tray Handle
A
Tray Key Lock & Push Open Button
B
HDD / SSD Access LED
C
Mute Switch
D
RAID Switch
E
RESET
F
15 PIN Power Connector
G
Front View Rear View
iR2774C-S3 body x1 Quick Guide x1 Screws and key
Please install iR2774C-S3 as the following instruction.
Hardware Installation
Install the product unit into the comput er chassis and make the necessary
connections and mount the product unit properly and securely to the bay position
desired.
Mounting Positions
1.
After unlocking the HDD tray key lock with the key attached to the accessory,
push the HDD tray ejection to the right and the removable drive tray will pop open
to remove the removable tray.
For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the
accessory kit. and re-insert the removable tray when completed.
2.
3.
When hardware installation is completed, you can turn on the power of the main
unit to proceed with relevant settings and applications.
Installation completed. Your operating system should automatically detect the hard
drives within. Please proceed to format the drives. Once formatting is completed,
you may then start to operate the device.
4.
5.
We suggest you using 2 brand new 2.5-inch SATA hard drives with the same brand
and model number for the best performance. When any one of the hard drives is
failed, please ensure that the capacity of the new hard drive is the same or bigger
than the original one.
Please ensure that the hard drives are free of bad tracks before using, otherwise, it
may cause system crash in turn resulting in data loss.
We strongly suggest you that the RAID mode should be decided before starting use
iR2774C-S3(The default is
). If you need to reset the RAID mode after using
iR2774C-S3, please remember to backup your data on the other hard drives or the
data may lose.
A reboot is required after adding or changing RAID mode to ensure that the update is
completed to the new RAID mode.
We strongly recommend you to keep an extra copy at your important personal data
other than stored in your iR2774C-S3 product. RAIDON will not be responsible of your
data loss problem.
1.
2.
3.
4.
5.
Raidon
iR2774C-S3 Quick Installation Guide
LED Instruction
Contents of Product Package
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual
product specifications may have changed before shipping; Latest product specifications
and updates can be found at www.RAIDON.com.tw or through your sales representa-
tive. No separate notifications will be provided by our company.
If you have any questions about RAIDON products or would like to receive the latest
product information, instruction manuals, or firmware, please contact Support-
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
v1.0 (JAN. 2023)
Screw positions to
mount like a
3.5" hard drive
Screw positions to mount
like a floppy drive
Lock Unlock
RAID Mode setting
Buzzer setting
If you want to change the RAID mode, change to JBOD mode first then change to the
RAID mode you want to use.
How to change the RAID mode:
Turn the power off and then press the RESET button when power on. After about 5
seconds, when the Buzzer beeps and the HDD LED flash, you can release the button
and the RAID mode changed complete.
Red light always on Red light always on
C
B
A
B
D
E
FGHI J
SATA Port
H
USB Type-C for Power Input
I
USB3.2 Gen1 Type-C埠(5Gbps)
J
1.
2.
