Raidon iR8023 User manual

󾙚󾙒󾙔󾙕󳐯󸴐󲰉󸀌󲴘󳊷
󵥄󱽢󶀲󳘍󲍍󷇤󸾇󱘎󷼲
󵍙󷮾󸎢󳻛
󱮇󸆓󲍍 󶼾󸆓󲍍
󾙓󴮶󳽹󹰇󶀲󹩌󴄯
󾙔󸸂󳲃󹏘
󾙕󱸇󴭷󹏘
󾙖󵽎󸍣󹏘
󾙗󹨺󹭁󳥿󹏘
󾙓󹱉󳡙
󾙔󹱉󳡙󸴠󳩻󲑬
󾙕󾙔󾙕󾙔󸴠󳩻󲑬
󾙖󾙙󸝕󳸄󸴠󳩻󲑬󵘱󶍐󵻓󵼟
󾙗󾙓󾙗󹥧󴴰󸬹󱨭󲑬
󾙘󾙙󸝕󳸄󸴠󳩻󲑬󵻓󵼟
󾙘󹥧󴴰󳵻󹢥󹰇󶀲󵍙
󾙙󵻓󵼟󳤊󱸇󵱍󳣈󳡧
󾙚󹭝󱬕󳥿󹏘
󾙛󵻓󵼟󳤊󱸇󵱍󹗕󱳕󲮠
󾙓󾙒󵻓󵼟󸕷󲳖󵍙
10
󾙚󾙒󾙔󾙕󱓻󺁪󾙓
󳐯󸴐󲰉󸀌󲴘󳊷󾙓 󷷹󶣙󱷸󹗕󱳕
󵥄󱽢󸾇󱘎󷼲
󳡳󹜈󱲯󸀌󲙼󵱍󳎕󾙍󱲯󸀌󱨱󲱬󳝶󱲯󱺃󱒷󱬼󶡿󱘎󽙡
󱨱󳩻󸴠󳩻󶦹󾙓
󸏤󱧾󵽎󸍣󵲉󹞐󸾇󱘎󷇤󵥄󱽢󴂸󸩑󳼎󱹷󴁹󱸉󳬨󳟾󳼎󶰎󲴞󸾇󱘎󾙍󷏖󴁹󱘕󱚑󵧰󲀷󾙍󸏤󷇤󳕝󵯔󶤛
󹉙󲀫󳟾󴑧󱱪󱖶󱾇󶺅󶢺󾙋
󸏤󱮇󳎃󲰨󶥢󱒷󸫝󸎢󳻛󴁕󾙊󹽥󱱣󾐍󳊬󱗴󱷸󱩎󹵁󵲉󹞐󸝕󴴰󾙋


󵥄󱽢󱛔󵥌󴪒󳘍󱕥󹭢


󸴠󳩻󶦹
󹥧󴴰󶦹
󱨱󳩻󱓻󴘣󴢰󶀲󳘍󲍍
1
2
iR8023
iR8023
銳銨科技
󹥧󷁷󳟾󱙫󴁽󲈜󾈸󱢶󾙊󳟾󱗏󹩌󾙋
󾙔󱤋󸷙󵥌󾙔󾙔󾙖󾙔󾙔󾙔󾙘󾙒󾙔󾙔󾙚󾙒󱒵󶇫󲵚󲳲󾙋
󾍐󱒶󳹂󵯔󵘱󶍐󵻓󵼟󵇾󴩰󷇤󱓻󾙊󴞂󵻓󵼟󱩇󱹒󸊥󲰬󴖹󳊬󾙍󵅂󱰖󶾩󵘱󶍐󵯔󵻓󵼟󾙋
󳋼󵅗󳊈󸕓󱛔󵥌󾙚󾙒󾙔󾙕󱮇󱧾󸊥󲰬󲜳󴖹󳊬󹭰󸊥󱠍󳼎󾙓󾙋
󱒪󳺞󱛔󵥌󴖹󳊬󵽎󸍣󳎕󱛔󵥌󵲉󱹒󵯔󵻓󵼟󸵂󷼇󴖹󳊬󱬫󳫘󲴌󴁮󲴘󷆼󸝕󳸄󸸉󲚫󲜿󴅞󹥰󸅳󸵂󷼇󴖹
󳊬󸖎󴁍󸏤󳹆󸖎󴁍󱮇󱧾󸵂󷼇󸝕󳸄󱢶󱘙󾙋
󲍨󳸯󲖮󳟾󸖎󴁍󴖹󳊬󳎕󹥰󹂧󳸯󲁑󱱣󾙍󱗴󵽎󱝬󲰏󳟸󴁍󳸯󵅂󳸯󵯔󴖹󳊬󾙋
󴂸󶟯󶣗󱧳󸊫󱛔󵥌󱒹󱹒󳉑󵑡󵯔󵻓󵼟󾙋󱙺󲜿󴅞󸅳󵙃󳎣󴁍󲜳󵯔󳵿󶾩󾙍󳟹󱟀󳋼󵅗󳊈󸕓󱛔󵥌󵲉󱹒󳉑󵑡󲏵
󷮾󵯔󵻓󵼟󾙋
󲰉󸀌󵻓󵼟󱮇󸏤󱧾󵽎󸍣󳡇󱛔󵥌󵯔󵻓󵼟󱓟󵇾󲘢󸪍󳟾󳼎󱩎󱗟󲀷󹯎󾙍󱗴󱨇󲴘󷆼󶟯󶣗󳬨󴢹󳟾󸝕󳸄󸸉󲚫󾙋
󵻓󵼟󴉓󳊬󱳎󳎕󾙍󾙚󾙒󾙔󾙕󵯔󶪎󱛔󵥌󱧗󲮨󲱬󹂩󳟾󸊫󴁮󷇤󵻓󵼟󲱬󹂩󱰗󶪎󳎕󵯔󴁹󳡇󱒹󱹒󾙋
󳋼󵅗󳊈󸕓󹠾󱕞󱛔󵥌󾙚󾙒󾙔󾙕󵯔󸝕󳸄󱧗󲮨󱰖󶾩󲙼󾙍󸏤󹃂󲴕󹂧󸅳󸝕󳸄󱢶󱘙󱭞󱸢󱒪󱞶󱧗󲮨󸀌󶱭󱒶󳟾
󸶿󶎙󱢶󱘙󾙍󹤢󹂧󱢶󳬅󳕝󹂧󸅳󵯔󸝕󳸄󾙋󷏖󳕝󱧗󲮨󲍨󾙚󾙒󾙔󾙕󵯔󸝕󳸄󳬨󴢹󳟾󸸉󲚫󾙍󲴌󱒹󸜘
󱘕󱚑󵯔󸜫󱘕󾙋
󾙓
󾙔
󾙕
󾙖
󾙗
󾙘
󾙙
󾙚
󾙛
󾙓󾙒
󵘱󶍐󵻓󵼟
󱓻󵻓󵼟
󴞂󵻓󵼟
󵻓󺁪󲰉󸀌
󸏤󱷪󵊉󱗴󱒷󴠁󹾘󲰏󳟸󵻓󺁪󲰉󸀌󽙡
󾙔󾙕󾙔󸴠󳩻󲑬󱼑󾙔󾙕󾙔󸴠󳩻󶦹󳫁󱜁󳂥󳩿󵥄󴑧󳟾󵥄󴑧󸳣󸶋
󾙔󾙕󾙔󸵂󷼇󵻓󺁪󵔜󳙿󱡲󴲏󾙍󲜿󴁹󹥰󸅳󱸯󱹙󹉐󹈽󹉙󱿺󲰺󴁽󱖶󱾇
[email protected]󶡁󱸇󵲉󹞐󸝕󳸄󾙋
󱮇󹩌󴄯󳲋󱚝
󳏃󳆭󸸂󳲃󹭢󵱹
󸤆󲋲󱒶󱒪󲶜󳟾󳼎󱸇󴭷
󸵂󱨭󱒷󱒪󲶜󳟾󳼎󵽎󸍣
󵧈󱬕󵜐󳼩󾙍󳼎󱗰󷼲󶟯󶣗󸶋󵌥󵯔󸔾󱺵󾙍󱙺󳼎󱒹󷆹󳹆󳍧
󹭘󴟽󳄜󸝕󳸄󱣪󸬹󾙍󱸧󸅳󳵫󲂆󵡌󲖀󴵟󳇓󾙍󲵊󱸯󳓦󳎿󴟽󳄜󾙋
󹰇󶀲󵯔󱹉󶇫󸉜󳓽
RAIDON RAIDbox2
RAID-1 vxxxxxx.x
Pri HDD : OK
Sec HDD : OK
󾙓󹜈󴘣󷇤󴟽󳄜󳎊󴘣󵔜󳙿
󾙔󴵟󳇓󸶋󺁷≥50 °C
Pri HDD : OK
Sec HDD : OK T
󾙖󵻓󵼟󳬨󴢹
Pe i HDD:OK
Sec HDD:FAILED
Pei HDD:FAILED
Sec HDD:OK
󾙗󸝕󳸄󹂧󳊈
Rebuilding
Sec→Pri 32%
󾙕󹱉󳡙󳵻󹢥
Pri HDD : OK F
Sec HDD : OK
RAIDON󵅂銳銨科技股份有限公司󳹾󱒷󱽢󵑡󱔐󱒪
󳘬󸒡󳕝󱛔󵥌銳銨科技股份有限公司󵯔󵥄󱽢󾙋
󴂸󳡧󱩩󸀖󵯔󸝕󸉜󲍨󱬕󵑙󱮇󹤚󵈨󳂷󶤛󷾩󸌭󶡙󵽎󸍣󾙍󱙺󲳉󹢣󵥄󱽢󸆉󴉓󲴌󳂷󱬕󸜤󳼩󵅂󴴸󽙢󱘕󱚑󵯔󵥄󱽢
󸆉󴉓󳟾󵲉󹞐󸝕󸉜󴁍󳸯󾙍󸏤󳕝󵲃󳩻󱒶 www.RAIDON.com.tw󶥢󶍨󴇉󸌋󾙍󳟾󵲃󳩻󷇤󳕝󵯔󴑧󱱪󶺅󶢺
󶋍󱸟󶺅󶫵󾙍󴂸󱨿󱸻󲴌󱒹󱸢󷼇󸴂󵸔󾙋
󲜿󴅞󳕝󲴕󹉐󹈽󶅎󳢸󵯔󵥄󱽢󴁹󱘕󱚑󵧰󲀷󾙍󳟾󳼎󳗗󵙃󳎣󾍐󳸯󵥄󱽢󸉜󳓽󾙊󱛔󵥌󳡧󱩩󳟾󹫼󺁪󾙍󸏤󳕝󶺅󶢺
[email protected]󾙍󳟹󱟀󲴌󱦦󸴐󲋲󸅻󳕝󾙋
󴂸󸎢󳻛󵲉󹞐󵥄󱽢󱨱󲱬󴠟銳銨科技股份有限公司󵑙󴝘󳡇󴁹
狀態 獨立硬碟指示燈 RAID 硬碟指示燈 電源 /
故障顯示燈 蜂鳴器
無硬碟
N/A 紅燈恆亮 紫燈恆亮 鳴叫
待機 藍燈恆亮 藍燈恆亮 藍燈恆亮 N/A
資料存取 藍燈閃爍 紫燈閃爍 藍燈恆亮 N/A
Rebuilding-Source 藍燈恆亮 藍燈恆亮 藍燈恆亮 N/A
Rebuilding-Target 藍燈恆亮 紅燈閃爍 藍燈恆亮 N/A
風扇故障 藍燈恆亮 藍燈恆亮 紫燈恆亮 鳴叫
V1.0 (Nov. 2021)
󳸄󷮾󽙡󾙓󾙕󾙒󾙓󾙒󾙒󾙚󾙙
󱽢󱹓󾙚󾙒󾙔󾙕󳐯󸴐󲰉󸀌󲴘󳊷
󵑙󴂸󾙓󾙒
󴃮󸞎󹇺󵑙󶠬󾙓󾙗󾙒󵽟󱴨󲮦󳯷󷏱󳷥󴂝󲙼
󲵚󲳲󾙔󾙓󾙒󾙔󾙛󾙙󾙖
12 3 4
56 7 8
Lock Unlock
󾙓󸏤󱛔󵥌󹥝󱘎󱲯󱨱󹠎󵯔󹗕󱳕󸈏󹐙󵻓󵼟󳤊󱸇󵱍󹐙󾙍
󲴌󹭝󱬕󳥿󹏘󱹙󱸴󳪁󶆐󾙋
󾙔󵻓󵼟󳤊󱸇󵱍󳣈󳡧󱜹󴁮󳌛󹜈󾙍󱵫󱸯󱸇󱬕󳤊󱸇󵱍󾙋
󾙕󳤊󱬕󾙔󳡼󵱨󶡿󱸇󱒷󱒶󷟰
󵯔󾙔󹯅󷷹󶣙󾙋
󾙖󳡳󹜈󱒶󷟰󱸇󱬕󷷹󶣙󾙋
󾙗󳫆󱨭󾙔󱓟󹐙󱒶󷷹󶣙󾙋
󾙘󳰠󱒷󱒶󷟰󸀖󳶨󵌥󵑖󵯔󹤸󲏵󶠬󾙍󷟰󲋲󱒶󷟰󾙋
󾙙󹐙󱒶󷷹󶣙󾙋
󾙚󾙔󲰉󸀌󲰏󳟸󳎕󸏤󲴌󳤊󱸇󵱍󳅷󶆐󳵳󱨭󱓻󴘣󱨱
󱓟󹞐󱒶󳣈󳡧󾙋
󾙛󲴌󵥄󱽢󲰉󸀌󳹆󹥧󷁷󴘣󴢰󱒶󵯔󱚅󶱭󾙍
󱓟󱛔󵥌󸾇󱘎󱲯󸀖󵯔󷷹󶣙󲌟󲰬󾙍󱓟󸴠󳩻󸴠
󳩻󶦹󷇤󹥧󴴰󶦹󾙋
󾙓󾙒󵻓󺁪󲰉󸀌󲰏󳟸󾙋󱒪󳺞󹜈󲁑󹥧󷁷󾙍󳕝󵯔󱚝󴑧󶟯󶣗󴁮󷆦󱱣󸯤󸔣󳡇󸀌󶱭󲜳󵯔󵻓󵼟󾙋󲜿󴅞󳕝󵯔󵻓󵼟󳼎
󳏳󹭥󷾩󴉓󳊬󱳎󵯔󾙍󸏤󱜅󵊉󹥧󷁷󵯔󱚝󴑧󶟯󶣗󸵂󷼇󵻓󵼟󴉓󳊬󱳎󴠁󹾘󾙋󵧈󲰏󳟸󵻓󵼟󴉓󳊬󱳎󳎕󾙍󵻓󵼟
󱜹󱸯󱗴󸵂󷼇󸝕󳸄󸕷󲳖󾙋

Raidon
iR8023 Quick Setup Guide
Package Contents and Product Views
Front View Rear View
1.LCD Display
2.UP/DOWN Button
3.ESC Button
4.Enter Button
5.MUTE Button
6.Power Failure Indicator
7.HDD Tray Handle
8.HDD Tray Ejection
9.HDD tray key lock
10.HDD Access Indicator
Open the package and you should find the following:


󽘂





SATA Cable
SATA Power Cable

1
2
iR8023
iR8023
Computers or servers must be with SATA I, SATA II, or SATA III interface.
Only support 2242/2260/2280 M.2 SATA SSD dimension.
The independent drive at the top cannot be set into RAID mode with primary or
secondary drive. It is an independent drive.
You are strongly advised to set the storage mode before using your iR8023. (The default
setting is the RAID 1.)
Once the drive mode configuration has been completed, re-configuration using the
same hard drives to set the drive mode will result in complete data loss. If you must
change the drive mode, make sure to backup all data prior to the mode change.
A reboot is required after adding or changing RAID mode to ensure that the update is
completed to the new RAID mode.
iR8023 product allows user to simultaneously use the two different hard drives from two
different manufactures. However, if the user expects a better efficiency, we strongly
recommend the user to use the two hard drives from the same manufacturer.
Please make sure that the two hard drives are free from bad blocks or defects prior to
installation in order to avoid system crashes or data loss.
The actual storage capacity of iR8023 recognized by the system may differ from the
total capacity stated on the hard drives combined once the drives have been formatted.
It is highly recommended for user to back up important data contained within the iR8023
unit on a regular basis or whenever the user feels necessary to a remote or a separate
storage device. RAIDON will not be responsible for any lost of data caused during the
use of the unit or the recovery of the data lost.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Hardware Installation
󾙚󾙒󾙔󾙕
󾙓󾙒




10
1.Cooling Fan
2.3-pin Fan Connector
3.RS232 Connector
4.7-pin SATA Connector (Standalone HDD)
5.15-pin Power Connector
6.7-pin SATA Connector (RAID HDD)
Standalone HDD
Pri HDD
󽙺ec HDD
iR8023 Device x1

󾙓

Contents of Product Package
Internal SATA Cable x1
RS232 Port: For industrial control system or IPC to monitor the hardware status.
More information, please contact your sales window or [email protected]
LED Instruction
Hard Disk Status on LCD Screen
Description of Front Panel Operation
Select Items
Back to next level or Cancel
Enter to next level or Confirm
Important Notice
RAIDON RAIDbox2
RAID-1 vxxxxxx.x
Pri HDD : OK
Sec HDD : READY
󾙓
󾙔
Pri HDD : OK
Sec HDD : READY T
󾙖
Pe i HDD:OK
Sec HDD:FAILED
Pei HDD:FAILED
Sec HDD:OK
󾙕󾙗󾙒
Pri HDD : OK F
Sec HDD : READY
When “T” is shown, it's an alert of system over heating, but it would still work fine.
And as long as the ambient temperature is improved, system shuts off the alert.
󾙗
Rebuilding
Sec→Pri 32%
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or rmware, please contact S[email protected] for assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
Status Standalone HDD RAID HDD System Indication Buzzer
No HDD
N/A
Red light always on Purple light always on ON
HDD Idle Blue light always on Blue light always on Blue light always on N/A
Access Blue light always on N/A
Rebuilding-Source Blue light always on Blue light always on Blue light always on N/A
Rebuilding-Target Blue light always on Blue light always on N/A
Fan Failure Blue light always on
Blue light always on
Purple light always on ON
V1.0 (Nov. 2021)
1. Unlock the M.2 SATA Bridge Tray Key Lock
and .
2. Pull out the M.2 SATA Bridge Tray.
3. Remove the screws of the upper cover of the
M.2 SATA Bridge.
4. Open the upper cover .
5. Insert M.2 and fix the screw.
6. Remove the paper from the heat sink in the
upper cover and put the upper cover back.
7. Fix the screws.
8. Install the M.2 SATA Bridge tray
back into the iR8023.
󾙛





12 3 4
56 7 8
Lock Unlock