Rainforest Automation RFA-Z109 EAGLE User manual

EAGLE™
Energy Access Gateway Link to Ethernet
Uploader API
Manual
Version 6
July 2014

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
2
Copyright © 2014 by RAINFOREST AUTOMATION, INC (“RFA”). All rights reserved.
No part of this manual may be reproduced or transmitted in any from without the expressed, written
permission of RFA.
Under copyright law, this manual or the software described within, cannot be copied, in whole or part,
without the written consent of the manufacturer, except in the normal use of the software to make a
backup copy. The same proprietary and copyright notices must be affixed to any permitted copies as
were affixed to the original. This exception does not allow copies to be made for others, whether or not
sold, but all of the material purchased (with all backup copies) can be sold, given, or loaned to another
person. Under the law, copying includes translating into another language or format.
Rainforest Automation may have patents, patent applications, trademarks, copyrights, or other intellectual
property rights covering subject matter in this document. Except as expressly provided in any written
license agreement from Rainforest Automation, the furnishing of this document does not give you any
license to these patents, trademarks, copyrights, or other intellectual property.
Trademarks
Third-party brands and company Names mentioned herein may be trademarks and/or registered
trademarks of their respective companies and are the sole property of their respective manufacturers.
Notice
The author(s) assumes no responsibility for any errors or omissions that may appear in this document nor
does it make a commitment to update the information contained herein.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
3
EAGLE™–Energy Access Gateway Link to Ethernet
RFA-Z109
Version 6
Uploader API Manual
Table of Contents
OVERVIEW.....................................................................................................................4
EAGLE™ Uploader API ..............................................................................................4
Communications Model...............................................................................................4
Data Structures............................................................................................................4
1. Requests .............................................................................................4
2. Replies ................................................................................................6
XML FRAGMENTS.........................................................................................................8
1. DeviceInfo............................................................................................8
2. NetworkInfo .........................................................................................8
3. InstantaneousDemand ........................................................................9
4. PriceCluster.......................................................................................10
5. Message............................................................................................11
6. CurrentSummation ............................................................................12
7. MeterInfo ...........................................................................................13
8. FastPollStatus ...................................................................................13
9. HistoryData........................................................................................14
10. ProfileData.......................................................................................14
XML COMMANDS........................................................................................................16
1. Command: set_fast_poll....................................................................16
2. Command: get_ fast_poll_status.......................................................16
3. Command: get_history_data..............................................................17
4. Command: get_ profile_data .............................................................17
5. Command: set_schedule...................................................................18
HANDLING THE NUMBERS........................................................................................19
Summation and Demand Readings...........................................................................19
Price Readings..........................................................................................................20

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
4
OVERVIEW
EAGLE™ Uploader API
The EAGLE™is an Ethernet device that communicates with a smart meter over a secured
ZigBee wireless network. The EAGLE™is an endpoint on the ZigBee network that is authorized
and authenticated to communicate with the smart meter. The API (Application Programming
Interface) described in this document provides a mechanism to allow external web servers to
receive smart meter data from the EAGLE™.
Communications Model
The EAGLE™is a Linux-based device that is running an internal web server. This web server
receives real time data from the smart meter, and can forward this data to external web servers
using HTTP POST requests. The body of these POST requests contains the meter data
structured as XML Fragments.
Data Structures
1. Requests
The EAGLE™ sends data in a POST request. POST requests have the following structure:
POST <URL> HTTP/1.1
<headers>
<blank>
<body>
Where:
- Every line ends with the newline character (0x0A).
- <URL> is the Uniform Resource Locator (web address) of the external web server.
- <headers> are a variable number of HTTP headers; each header is on its own line.
- <blank>is a blank line, consisting only of the newline character (0x0A).
- <body>is the main text of the POST request, which has the structure shown below.
The body of the POST request has the following structure:
<?xml version="1.0"?>
<rainforest macId="0xffffffffffff" version=”undefined”
timestamp="0000000000s">
<XML>
</rainforest>
The first line is the standard XML (eXtensible Markup Language) Prolog. This is followed by the
Root Element, which for our purposes is enclosed by the tags <rainforest> and
</rainforest>. The Root Element has three attributes:

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
5
macId –this is a 12-digit hexadecimal number. It is the MAC Address of the EAGLE™.
version –this is for future use and is currently undefined.
timestamp -- this is an integer with a standard Unix timestamp, i.e., number of seconds
since Jan.1, 1970.
The body of the Root Element consists of XML Fragments. An XML Fragment is a stripped
down XML Element. The EAGLE™uses XML Fragments to simplify the parsing of the data
stream, while providing a data structure that is flexible and human readable.
The XML Fragments have the following structure:
<tag>
<element>value</element>
…
</tag>
Where:
- Every line ends with the newline character (0x0A).
- <tag> is the start tag for the XML Fragment; each type will have a unique tag name;
- <element> is the start tag for an element; there will be one or more child elements in the
fragment; each element will have a unique element name.
- … indicates the variable number of specific elements
Element values can be of various types:
- {string} indicates an element consisting of Extended ASCII text
- {enumeration} indicates an element that can have a specific list of values.
- 0xFFFFF indicates an element consisting of a base16 (hex) number
- 00 indicates an element consisting of an integer
- 000.000 indicates an element consisting of a signed decimal number
[<element>]–square brackets indicate optional elements.
value1|value2|value3 –vertical bars separate valid values in an enumeration list.
Note that element names are case insensitive; the case is used strictly for legibility. XML
parsers should be designed to ignore case when receiving requests from the EAGLE™.
Example
Here is an example of a POST request:
POST /rfaeagle.php HTTP/1.0
Host: 192.168.11.3:8888
Accept: */*
From: [email protected]
User-Agent: Raven Uploader/v1
Content-Length: 483
Content-Type: application/x-www-form-urlencoded
<?xml version="1.0"?>
<rainforest macId="0xf0ad4e00ce69" timestamp="1355292588s">

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
6
<InstantaneousDemand>
<DeviceMacId>0x00158d0000000004</DeviceMacId>
<MeterMacId>0x00178d0000000004</MeterMacId>
<TimeStamp>0x185adc1d</TimeStamp>
<Demand>0x001738</Demand>
<Multiplier>0x00000001</Multiplier>
<Divisor>0x000003e8</Divisor>
<DigitsRight>0x03</DigitsRight>
<DigitsLeft>0x00</DigitsLeft>
<SuppressLeadingZero>Y</SuppressLeadingZero>
</InstantaneousDemand>
</rainForest>
Note that every line in the above example actually ends with the newline character (0x0A). This
is not shown explicitly for clarity.
2. Replies
The EAGLE™ expects to see a valid HTTP response to each POST request. These look like:
HTTP/1.0 <code>
<headers>
<blank>
<body>
Where:
- Every line ends with the newline character (0x0A).
- <code> is an HTTP status code, which consists of a 3-digit number and a short text
phrase. This is usually “200 OK”.
- <headers> are a variable number of HTTP headers; each header is on its own line.
- <blank> is a blank line, consisting only of the newline character (0x0A).
- <body> is optional and can contain a single XML fragment.
Example
Here is an example of a reply:
HTTP/1.0 200 OK
Date: Wed, 18 Dec 2013 21:28:44 GMT
Server: Apache/2.2.15 (CentOS)
X-Powered-By: PHP/5.3.3
Content-Length: 168
Connection: close
Content-Type: text/html; charset=UTF-8
<LocalCommand>
<Name>get_history_data</Name>
<MacId>0x00178d0000000004</MacId>

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
7
<StartTime>0x0</StartTime>
<Demand>0x001738</Demand>
<Frequency>300</Frequency>
</LocalCommand>
Note that every line in the above example actually ends with the newline character (0x0A). This
is not shown explicitly for clarity.
Most replies will not have a <body> component, and will simply acknowledge a POST sent by
the EAGLE™. However, it is also possible to send a single XML-formatted command to the
EAGLE™ in the <body> of the reply. While a command sent in this way is being processed,
the EAGLE™ will not accept any additional commands found in a reply. So, only one command
can be put in the <body> of a reply.
A command sent to the EAGLE™ in the <body> of a reply may change the operation of the
gateway, and may also cause the generation of a POST request containing specific data.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
8
XML FRAGMENTS
1. DeviceInfo
DeviceInfo fragments provide some basic information about the EAGLE™ device.
<DeviceInfo>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<InstallCode>0xFFFFFFFFFFFFFFFF</InstallCode>
<LinkKey>0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF</LinkKey>
<FWVersion>{string}</FWVersion>
<HWVersion>{string}</HWVersion>
<ImageType>0xFFFF</ImageType>
<Manufacturer>{string}</Manufacturer>
<ModelId>{string}</ModelId>
<DateCode>{string}</DateCode>
</DeviceInfo>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ZigBee radio
InstallCode
16 hex digits
Install Code for EAGLE™ ZigBee radio
LinkKey
32 hex digits
ZigBee radio Link Key
FWVersion
Text
Firmware Version
HWVersion
Text
Hardware Version
ImageType
4 hex digits
ZigBee code image type
Manufacturer
Text
“Rainforest Automation”
ModelId
Text
“RFA-Z109”
DateCode
YYYYMMDDZZZZZZZZ
Manufacturer’s date code and lot number
2. NetworkInfo
NetworkInfo fragments provide detailed information about the ZigBee network that the
EAGLE™ is connected to.
<NetworkInfo>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<CoordMacId>0xFFFFFFFFFFFFFFFF</CoordMacId>
<Status>{enumeration}</Status>
[<Description>{string}</Description>]
[<StatusCode>0xFF</StatusCode>]
[<ExtPanId>0xFFFFFFFFFFFFFFFF</ExtPanId>]
[<Channel>00</Channel>]
[<ShortAddr>0xFFFF</ShortAddr>]
<LinkStrength>0xFF</LinkStrength>
</NetworkInfo>

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
9
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
CoordMacId
16 hex digits
MAC Address of Meter
Status
Initializing | Network
Discovery | Joining | Join: Fail
| Join: Success |
Authenticating |
Authenticating: Success |
Authenticating: Fail |
Connected | Disconnected |
Rejoining
Indicates the current state of the EAGLE™
ZigBee radio.
Description
Text; Optional
Description of ZigBee radio.state
StatusCode
2 hex digits; Optional
Status code for the current state
ExtPanId
16 hex digits; Optional
Extended PAN ID of the ZigBee network
Channel
11 –26; Optional
Indicates the radio channel on which the
EAGLE™ is operating
ShortAddr
4 hex digits; Optional
The short address assigned to the
EAGLE™ by the network coordinator
LinkStrength
0x00 –0x64
Indicates the strength of the radio link
3. InstantaneousDemand
InstantaneousDemand fragments provide the current consumption rate as recorded by the
meter. Note that readings are recorded as integers and are converted into a decimal number by
using the multiplier and divisor, i.e., Demand Reading = demand value X multiplier / divisor.
<InstantaneousDemand>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<Demand>0xFFFFFF</Demand>
<Multiplier>0xFFFFFFFF</Multiplier>
<Divisor>0xFFFFFFFF</Divisor>
<DigitsRight>0xFF</DigitsRight>
<DigitsLeft>0xFF</DigitsLeft>
<SuppressLeadingZero>{enumeration}</SuppressLeadingZero>
</InstantaneousDemand>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
TimeStamp
Up to 8 hex digits
UTC Time (offset in seconds from 00:00:00
01Jan2000) when demand data was received
from meter.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
10
Demand
6 hex digits
The raw instantaneous demand value. This is
a 24-bit signed integer.
Multiplier
Up to 8 hex digits
The multiplier; if zero, use 1
Divisor
Up to 8 hex digits
The divisor; if zero, use 1
DigitsRight
Up to 2 hex digits
Number of digits to the right of the decimal
point to display
DigitsLeft
Up to 2 hex digits
Number of digits to the left of the decimal point
to display
Suppress
LeadingZero
Y | N
Y: Do not display leading zeros
N: Display leading zeros
4. PriceCluster
PriceCluster fragments provide the current price in effect on the meter, or the user-defined price
set on the EAGLE™. If the user-defined price is not set and the meter price is not set, then the
price returned is zero.
<PriceCluster>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<Price>0xFFFFFFFF</Price>
<Currency>0xFFFF</Currency>
<TrailingDigits>0xFF</TrailingDigits>
<Tier>00</Tier>
[<TierLabel>{string}</TierLabel> |
<RateLabel>{string}</RateLabel>]
</PriceCluster>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
TimeStamp
Up to 8 hex digits
UTC Time (offset in seconds from 00:00:00
01Jan2000) when price data was received
from meter or set by user
Price
Up to 8 hex digits
Price from meter or set by user; will be zero if
no price is set
Currency
Up to 4 hex digits
Currency being used; value of this field
matches the values defined by ISO 4217
TrailingDigits
Up to 2 hex digits
The number of implicit decimal places in the
price. (e.g. 2 means divide Price by 100).
Tier
1 - 5
The price Tier in effect.
RateLabel
Text
Rate label for the current price tier; will be “Set
by User” if a user-defined price is set

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
11
5. Message
Message fragments provide the current text message from the meter. If a confirmation is
required, the ConfirmationRequired flag is set. If the user has already confirmed the message,
then the Confirmed flag is set to Y. The ID is the reference to a particular message. The
message text is HTML escape encoded.
<MessageCluster>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<Id>0xFFFFFFFF</Id>
<Text>{string}</Text>
<Priority>{enumeration}</Priority>
<ConfirmationRequired>{enumeration}</ConfirmationRequired>
<Confirmed>{enumeration}</Confirmed>
<Queue>{enumeration}</Queue>
</MessageCluster>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
TimeStamp
Up to 8 hex digits
UTC Time (offset in seconds from 00:00:00
01Jan2000) when message was received from
meter
Id
Up to 8 hex digits
Message ID from meter
Text
Text
Contents of message, HTML encoded:
&gt; replaces the > character
&lt; replaces the < character
&amp; replaces the & character
&quot; replaces the " character
Priority
Low | Medium | High |
Critical
Message priority
Confirmation
Required
Y | N
Y: a user confirmation is required;
N: a user confirmation is not required (default)
Confirmed
Y | N
Y: the user confirmation has been sent;
N: the user confirmation has not been sent
(default)
Queue
Active | Cancel Pending
Active: Indicates message is in active queue
Cancel Pending: Indicates message is in
cancel pending queue

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
12
6. CurrentSummation
CurrentSummation fragments provides the total consumption to date as recorded by the meter.
Note that readings are recorded as integers and are converted into a decimal number by using
the multiplier and divisor, i.e., Summation Reading = summation value X multiplier / divisor.
<CurrentSummationDelivered>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<SummationDelivered>0xFFFFFFFF</SummationDelivered>
<SummationReceived>0xFFFFFFFF</SummationReceived>
<Multiplier>0xFFFFFFFF</Multiplier>
<Divisor>0xFFFFFFFF</Divisor>
<DigitsRight>0xFF</DigitsRight>
<DigitsLeft>0xFF</DigitsLeft>
<SuppressLeadingZero>{enumeration}</SuppressLeadingZero>
</CurrentSummationDelivered>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
TimeStamp
Up to 8 hex digits
UTC Time (offset in seconds from 00:00:00
01Jan2000) when demand data was received
from meter.
Summation
Delivered
Up to 8 hex digits
The raw value of the total summation of
commodity delivered from the utility to the
user.
Summation
Received
Up to 8 hex digits
The raw value of the total summation of
commodity received from the user by the
utility.
Multiplier
Up to 8 hex digits
The multiplier; if zero, use 1
Divisor
Up to 8 hex digits
The divisor; if zero, use 1
DigitsRight
Up to 2 hex digits
Number of digits to the right of the decimal
point to display
DigitsLeft
Up to 2 hex digits
Number of digits to the left of the decimal point
to display
Suppress
LeadingZero
Y | N
Y: Do not display leading zeros
N: Display leading zeros

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
13
7. MeterInfo
MeterInfo fragments provide information about meters that are on the ZigBee network.
<MeterInfo>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<Type>{enumeration}</Type>
<NickName>{string}</NickName>
[<Account>{string}</Account>]
[<Auth>{string}</Auth>]
[<Host>{string}</Host>]
[<Enabled>{enumeration}</Enabled>]
</MeterInfo>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
Type
electric | gas | water |
other
Type of meter
Nickname
Text
Nickname set for the meter
Account
Text
Account Identification
Auth
Text
Authentication code
Host
Text
Hosting Provider
Enabled
Y | N
Y: to start transmitting data to host
N: to stop transmitting data to host
8. FastPollStatus
FastPollStatus fragments provide the current status of fast poll mode, as negotiated with the
meter. A value of zero for Duration indicates that fast poll mode is not active.
<FastPollStatus>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<Frequency>0x00</Frequency>
<EndTime>0xFFFFFFFF</EndTime>
</FastPollStatus>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
Frequency
0x01 –0xFF
Frequency to poll meter, in seconds

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
14
EndTime
Up to 8 hex digits
UTC Time (offset in seconds from 00:00:00
01Jan2000) when fast poll will end. If
EndTime is earlier than the current time, then
fast poll mode is turned off.
9. HistoryData
AHistoryData fragment contains a series of elements; each element is a CurrentSummation
fragment. It is sent in response to a get_history_data command.
<HistoryData>
<CurrentSummation>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<SummationDelivered>0xFFFFFFFF</SummationDelivered>
<SummationReceived>0xFFFFFFFF</SummationReceived>
<Multiplier>0xFFFFFFFF</Multiplier>
<Divisor>0xFFFFFFFF</Divisor>
<DigitsRight>0xFF</DigitsRight>
<DigitsLeft>0xFF</DigitsLeft>
<SuppressLeadingZero>{enumeration}</SuppressLeadingZero>
</CurrentSummation>
:
:
<CurrentSummation>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<TimeStamp>0xFFFFFFFF</TimeStamp>
<SummationDelivered>0xFFFFFFFF</SummationDelivered>
<SummationReceived>0xFFFFFFFF</SummationReceived>
<Multiplier>0xFFFFFFFF</Multiplier>
<Divisor>0xFFFFFFFF</Divisor>
<DigitsRight>0xFF</DigitsRight>
<DigitsLeft>0xFF</DigitsLeft>
<SuppressLeadingZero>{enumeration}</SuppressLeadingZero>
</CurrentSummation>
</HistoryData>
10.ProfileData
AProfileData fragment is sent in response to a get_profile_data command. It contains a set of
interval data points that have been stored by the meter (support for this feature varies by meter
and utility). Each data point represents the change in total summation reading over a specified
time interval. This time interval is reported in the ProfileIntervalPeriod field. The type of interval
data (summation delivered or received) depends upon the IntervalChannel field in the
get_profile_data command. Data is organized in reverse chronological order: the most recent
interval is transmitted first and the oldest interval is transmitted last.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
15
<ProfileData>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>
<EndTime>0x00000000</EndTime>
<Status>0x00</Status>
<ProfileIntervalPeriod>0</ProfileIntervalPeriod>
<NumberOfPeriodsDelivered>0x00</NumberOfPeriodsDelivered>
[<IntervalData1>0x000000</IntervalData1>]
[<IntervalData2>0x000000</IntervalData2>]
:
:
[<IntervalData12>0x000000</IntervalData12>]
</ProfileData>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
MAC Address of Meter
EndTime
Up to 8 hex digits
UTC Time (offset in seconds from
00:00:00 01Jan2000) of the end of the
most chronologically recent interval; 0x0
indicates the most recent interval block.
Status
0x0 –0x05
Status of returned data:
0x00
Success
0x01
Undefined Interval Channel
requested
0x02
Interval Channel not
supported
0x03
Invalid End Time
0x04
More periods Requested
than can be returned
0x05
No intervals available for
the requested time
ProfileIntervalPeriod
0 - 7
The length of each sampling interval:
0
Daily
1
60 minutes
2
30 minutes
3
15 minutes
4
10 minutes
5
7.5 minutes
6
5 minutes
7
2.5 minutes
NumberOfPeriodsDelivered
0x0 –0xFF
The number of intervals being returned.
IntervalDataX
Up to 6 hex digits
X = 1-12. Series of up to 12 interval
data points from the meter. Most recent
interval is first; oldest is last. Invalid
intervals are marked as 0xFFFFFF.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
16
XML COMMANDS
These XML-formatted commands can be used in the body of a reply to change the operation of
the EAGLE™, and to cause the EAGLE™to generate a POST request containing specific data.
The <body> of a reply can only contain one command.
1. Command: set_fast_poll
Send the set_fast_poll command to have the EAGLE™ set the fast poll mode on the meter. In
fast poll mode, the meter will send Instantaneous Demand updates at the frequency requested.
This is a ZigBee Smart Energy 1.1 feature.
For ZigBee Smart Energy 1.0 meters, the EAGLE™ will emulate this feature, if possible. For
some meters fast poll mode will not be allowed. In that case, polling will default to a maximum
frequency of every 4 seconds for up to 15 minutes.
If Duration is zero, then fast poll mode is turned off.
Note that the tag <RavenCommand> is used instead of <LocalCommand>.
<RavenCommand>
<Name>set_fast_poll</Name>
<MacId>0xFFFFFFFFFFFFFFFF</MacId>
<Frequency>0x00</Frequency>
<Duration>0x00</Duration>
</RavenCommand>
Element
Range
Description
MacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
Frequency
0x01 –0xFF
Frequency to poll meter, in seconds
Duration
0x00 –0x0F
Duration of fast poll mode, in minutes;
maximum is 15 minutes
2. Command: get_ fast_poll_status
Send the get_fast_poll_status command to get the current status of fast poll mode. The
EAGLE™ will send a FastPollStatus fragment in response.
<LocalCommand>
<Name>get_fast_poll_status</Name>
<MacId>0xFFFFFFFFFFFFFFFF</MacId>
</LocalCommand>
Element
Range
Description
MacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
17
3. Command: get_history_data
Send the get_history_data command to get a series of summation values over an interval of
time. In response, the EAGLE™ will send a HistoryData fragment containing a series of
CurrentSummation fragments –one for each sample over the interval.
<LocalCommand>
<Name>get_history_data</Name>
<MacId>0xFFFFFFFFFFFFFFFF</MacId>
<StartTime>0xFFFFFFFF</StartTime>
[<EndTime>0xFFFFFFFF</EndTime>]
[<Frequency>0x0000</Frequency>]
</LocalCommand>
Element
Range
Description
MacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
StartTime
Up to 8 hex digits
UTC Time (offset in seconds from
00:00:00 01Jan2000) of the start of the
history interval. If StartTime is older than
the oldest sample, then the interval will
start from the oldest sample.
EndTime
Up to 8 hex digits
UTC Time (offset in seconds from
00:00:00 01Jan2000) of the end of the
history interval. If not specified, EndTime
will be the current time.
Frequency
4 hex digits
Requested number of seconds between
samples. Availability limited by what has
been collected by EAGLE™. Default is
all of the existing samples in the interval.
4. Command: get_ profile_data
Send the get_profile_data command to have the EAGLE™ retrieve interval data information
stored in the meter. The EAGLE™ will send a ProfileData fragment in response.
Note that the tag <RavenCommand> is used instead of <LocalCommand>.
<RavenCommand>
<Name>get_profile_data</Name>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
[<MeterMacId>0xFFFFFFFFFFFFFFFF</MeterMacId>]
<NumberOfPeriods>0x00</NumberOfPeriods>
<EndTime>0xFFFFFFFF</EndTime>
<IntervalChannel>{enumeration}</IntervalChannel>
</RavenCommand>

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
18
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
MeterMacId
16 hex digits
Unique MAC Address of meter. Optional
if there is only one meter.
NumberOfPeriods
0x0 –0xc
Number of intervals requested;
maximum is 12.
EndTime
Up to 8 hex digits
UTC Time (offset in seconds from
00:00:00 01Jan2000) of the end of the
most chronologically recent interval; 0x0
indicates the most recent interval block.
IntervalChannel
Delivered | Received
Delivered: Interval data for commodity
delivered by the utility to the user.
Received: Interval data for commodity
received by the utility from the user.
5. Command: set_schedule
Send the set_schedule command to change how the EAGLE™ polls the meter. The rate at
which each type of meter reading is polled can be set.
Note that the tag <RavenCommand> is used instead of <LocalCommand>.
<RavenCommand>
<Name>set_schedule</Name>
<DeviceMacId>0xFFFFFFFFFFFFFFFF</DeviceMacId>
<Event>{enumeration}</Event>
<Frequency>0xffff</Frequency>
<Enabled>{enumeration}</Enabled>
</RavenCommand>
Element
Range
Description
DeviceMacId
16 hex digits
MAC Address of EAGLE™ ZigBee radio
Event
price | summation |
demand | message
Type of reading to get from meter
Frequency
4 hex digits
Frequency to poll meter, in seconds
Enabled
Y | N
Y: Set this rate for this type of reading
N: Disable polling for this type of reading

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
19
HANDLING THE NUMBERS
Summation and Demand Readings
Summation and Demand readings from the meter are reported as hexadecimal integers with
formatting instructions to calculate the decimal value.
Here is a typical InstantaneousDemand notification:
<InstantaneousDemand>
<DeviceMacId>0x00158d0000000004</DeviceMacId>
<MeterMacId>0x00178d0000000004</MeterMacId>
<TimeStamp>0x185adc1d</TimeStamp>
<Demand>0x001738</Demand>
<Multiplier>0x00000001</Multiplier>
<Divisor>0x000003e8</Divisor>
<DigitsRight>0x03</DigitsRight>
<DigitsLeft>0x00</DigitsLeft>
<SuppressLeadingZero>Y</SuppressLeadingZero>
</InstantaneousDemand>
The values from this notification are:
Demand reading = 1738 (hex) = 5944 (decimal)
Multiplier = 1
Divisor = 3E8 (hex) = 1000 (decimal)
The actual Demand value is calculated by using the multiplier and divisor:
5944 x 1 / 1000 = 5.944 kWh
If the multiplier or divisor is zero then use a value of one instead.
For Summation, the same process is used, and the multiplier and divisor are used by both the
SummationDelivered and SummationReceived readings in the CurrentSummation notification.
The other formatting values (DigitsRight, DigitsLeft, SupressLeadingZeros) are the preferred
display settings set by the utility and can be ignored for the purposes of calculating values.

Rainforest Automation, Inc.
EAGLE™
Uploader API Manual
20
Price Readings
Price readings from the meter are reported as a hexadecimal integer with a format instruction to
place the decimal point.
Here is a typical PriceCluster notification:
<PriceCluster>
<DeviceMacId>0x00158d00001ab01e</DeviceMacId>
<MeterMacId>0x00078100011cf431</MeterMacId>
<TimeStamp>0x1a462b4d</TimeStamp>
<Price>0x0000007d</Price>
<Currency>0x0348</Currency>
<TrailingDigits>0x03</TrailingDigits>
<Tier>0x01</Tier>
<RateLabel>Set by User</RateLabel>
</PriceCluster>
The values from this notification are:
Price reading = 7D (hex) = 125 (decimal)
Trailing Digits = 3
Currency Code = 348 (hex) = 840 (decimal)
The actual value of the Price is determined by placing the decimal point 3 digits from the right.
The Currency Code indicates that the value is in US Dollars (see ISO 4217). So the final price
is $0.125.