Raisecom ISCOM5508 Guide

ISCOM5508 (B)
Hardware Description
(Rel_01)
www.raisecom.com

Raisecom Technology Co., Ltd. provides customers with comprehensive technical support and services. For any
assistance, please contact our local office or company headquarters.
Website: http://www.raisecom.com
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Address: Raisecom Building, No. 11, EastArea, No. 10 Block, East Xibeiwang Road, Haidian District, Beijing,
P.R.China
Postal code: 100094
-----------------------------------------------------------------------------------------------------------------------------------------
Notice
Copyright © 2014
Raisecom
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in Writing from Raisecom
Technology Co., Ltd.
is the trademark of Raisecom Technology Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.

Raisecom
ISCOM5508 (B) Hardware Description
Preface
Raisecom Technology Co., Ltd.
1
Preface
Objectives
This document describes the chassis, hardware components, and cables of the ISCOM5508,
including hardware features, components, supported functions and technical specifications of
each component, and appearance and technical specifications of cables.
Versions
The following table lists the product versions related to this document.
Product name
Hardware version
Software version
ISCOM5508
B.00 or later
V2.2 or later
Related manuals
The following table lists manuals and their contents related to the ISCOM5508.
Name
Description
ISCOM5508 (B) Hardware
Description
This guide mainly introduces product overview,
components, fiber and cables, pluggable modules,
lookup table of LEDs, and lookup table of weight and
power consumption.
ISCOM5508 (B) Configuration
Guide
This guide mainly introduces basic configuration, data
service configuration, multicast service configuration,
VoIP service configuration, CATV service
configuration, TDM service configuration, MAC
address table configuration, VLAN configuration,
Spanning Tree configuration, routing configuration,
DHCP configuration, QoS configuration, OAM
configuration, link security configuration, and system
management configuration.

Raisecom
ISCOM5508 (B) Hardware Description
Preface
Raisecom Technology Co., Ltd.
2
Conventions
Symbol conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Indicate a hazard with a medium or low level of risk which, if
not avoided, could result in minor or moderate injury.
Indicate a potentially hazardous situation that, if not avoided,
could cause equipment damage, data loss, and performance
degradation, or unexpected results.
Provide additional information to emphasize or supplement
important points of the main text.
Indicate a tip that may help you solve a problem or save time.
General conventions
Convention
Description
Times New Roman
Normal paragraphs are in Times New Roman.
Arial
Paragraphs in Warning, Caution, Notes, and Tip are in Arial.
Boldface
Names of files, directories, folders, and users are in boldface.
For example, log in as user root.
Italic
Book titles are in italics.
Lucida Console
Terminal display is in Lucida Console.
Change history
Updates between document versions are cumulative. Therefore, the latest document version
contains all updates made to previous versions.
Issue 01 (2013-10-18)
Initial commercial release

Raisecom
ISCOM5508 (B) Hardware Description
Contents
Raisecom Technology Co., Ltd.
3
Contents
1 Product overview...........................................................................................................................1
1.1 Overview..........................................................................................................................................................1
1.2 Appearance and slots........................................................................................................................................2
1.2.1 Appearance of chassis.............................................................................................................................2
1.2.2 Distribution of slots.................................................................................................................................2
1.3 Physical parameters..........................................................................................................................................2
2 Components ...................................................................................................................................4
2.1 Overview of components .................................................................................................................................4
2.1.1 Classification of components..................................................................................................................4
2.1.2 Appearances of components....................................................................................................................5
2.1.3 Hardware information label ....................................................................................................................7
2.2 MCC (EPSC)....................................................................................................................................................8
2.2.1 Introduction.............................................................................................................................................8
2.2.2 Panel and slots.........................................................................................................................................8
2.2.3 Interfaces.................................................................................................................................................8
2.2.4 LEDs.....................................................................................................................................................10
2.2.5 Technical specifications ........................................................................................................................10
2.3 4-EPON interface sub-card (EP4B) ............................................................................................................... 11
2.3.1 Introduction........................................................................................................................................... 11
2.3.2 Panel and slots....................................................................................................................................... 11
2.3.3 Interfaces............................................................................................................................................... 11
2.3.4 LEDs.....................................................................................................................................................12
2.3.5 Technical specifications ........................................................................................................................12
2.4 4-GE interface sub-card (GE4B)....................................................................................................................12
2.4.1 Introduction...........................................................................................................................................12
2.4.2 Panel and slots.......................................................................................................................................12
2.4.3 Interfaces...............................................................................................................................................13
2.4.4 LEDs.....................................................................................................................................................13
2.4.5 Technical specifications ........................................................................................................................14
2.5 AC power module (RPA1101-SI-220S12) .....................................................................................................14
2.5.1 Introduction...........................................................................................................................................14
2.5.2 Panel and slots.......................................................................................................................................15

Raisecom
ISCOM5508 (B) Hardware Description
Contents
Raisecom Technology Co., Ltd.
4
2.5.3 Interfaces...............................................................................................................................................15
2.5.4 LEDs.....................................................................................................................................................15
2.5.5 Technical specifications ........................................................................................................................16
2.6 DC power module (RPD1101-48S12)............................................................................................................16
2.6.1 Introduction...........................................................................................................................................16
2.6.2 Panel and slots.......................................................................................................................................17
2.6.3 Interfaces...............................................................................................................................................17
2.6.4 LEDs.....................................................................................................................................................17
2.6.5 Technical specifications ........................................................................................................................18
2.7 Fan module (FANS306) .................................................................................................................................18
2.7.1 Introduction...........................................................................................................................................18
2.7.2 Panel and slots.......................................................................................................................................18
2.7.3 LEDs.....................................................................................................................................................19
2.7.4 Technical specifications ........................................................................................................................19
3 Fiber and cables...........................................................................................................................20
3.1 Fiber...............................................................................................................................................................20
3.1.1 Introduction...........................................................................................................................................20
3.1.2 Connector..............................................................................................................................................21
3.1.3 Wiring scheme ......................................................................................................................................22
3.2 Ethernet cable.................................................................................................................................................23
3.2.1 Introduction...........................................................................................................................................23
3.2.2 Appearance............................................................................................................................................23
3.2.3 Technical specifications ........................................................................................................................23
3.3 Configuration cable........................................................................................................................................26
3.3.1 Introduction...........................................................................................................................................26
3.3.2 Appearance............................................................................................................................................26
3.3.3 Technical specifications ........................................................................................................................27
3.4 DC power cable..............................................................................................................................................28
3.4.1 Introduction...........................................................................................................................................28
3.4.2 Appearance............................................................................................................................................28
3.4.3 Technical specifications ........................................................................................................................29
3.5 AC power cable..............................................................................................................................................29
3.5.1 Introduction...........................................................................................................................................29
3.5.2 Appearance............................................................................................................................................30
3.5.3 Technical specifications ........................................................................................................................30
3.6 Grounding cable.............................................................................................................................................31
3.6.1 Introduction...........................................................................................................................................31
3.6.2 Appearance............................................................................................................................................31
3.6.3 Technical specifications ........................................................................................................................32
4 Pluggable modules .....................................................................................................................34
4.1 1000 Mbit/s SFP optical module....................................................................................................................34

Raisecom
ISCOM5508 (B) Hardware Description
Contents
Raisecom Technology Co., Ltd.
5
4.1.1 Functions and appearance.....................................................................................................................34
4.1.2 Label .....................................................................................................................................................34
4.1.3 Technical specifications ........................................................................................................................35
4.2 1000 Mbit/s SFP electrical module ................................................................................................................36
4.2.1 Functions and appearance.....................................................................................................................36
4.2.2 Techinical specifications .......................................................................................................................36
4.3 PON SFP optical module ...............................................................................................................................37
4.3.1 Functions and appearance.....................................................................................................................37
4.3.2 Label .....................................................................................................................................................37
4.3.3 Technical specifications ........................................................................................................................38
5 Lookup table of LEDs.................................................................................................................39
6 Lookup table of weight and power consumption ................................................................41
7 Appendix ......................................................................................................................................43
7.1 Terms..............................................................................................................................................................43
7.2 Acronyms and abbreviations ..........................................................................................................................44

Raisecom
ISCOM5508 (B) Hardware Description
Figures
Raisecom Technology Co., Ltd.
6
Figures
Figure 1-1 Appearance of the ISCOM5508 chassis ...............................................................................................2
Figure 1-2 Distribution of slots on the ISCOM5508..............................................................................................2
Figure 2-1 Appearance of the MCC (EPSC)..........................................................................................................5
Figure 2-2 Appearance of the EP4B sub-card ........................................................................................................5
Figure 2-3 Appearance of the GE4B sub-card .......................................................................................................6
Figure 2-4 Appearance of the power module .........................................................................................................6
Figure 2-5 Appearance of the fan module..............................................................................................................6
Figure 2-6 Hardware information label on the ISCOM5508 .................................................................................7
Figure 2-7 Panel of the EPSC card.........................................................................................................................8
Figure 2-8 Panel of the EP4B sub-card................................................................................................................ 11
Figure 2-9 Panel of the GE4B sub-card ...............................................................................................................13
Figure 2-10 Panel of the RPA1101 power module...............................................................................................15
Figure 2-11 Panel of the RPD1101 power module...............................................................................................17
Figure 2-12 Panel of the FANS306 module .........................................................................................................19
Figure 3-1 LC/PC fiber connector........................................................................................................................21
Figure 3-2 SC/PC fiber connector........................................................................................................................22
Figure 3-3 Ethernet cable.....................................................................................................................................23
Figure 3-4 Wiring of the straight-through cable wiring .......................................................................................24
Figure 3-5 Wiring of the 100 Mbit/s crossover cable...........................................................................................25
Figure 3-6 Wiring of the 1000 Mbit/s crossover cable.........................................................................................25
Figure 3-7 Configuration cable ............................................................................................................................26
Figure 3-8 Wiring between the Console interface and the RS-232 serial interface..............................................28
Figure 3-9 DC power cable..................................................................................................................................29
Figure 3-10 European standard AC power cable..................................................................................................30
Figure 3-11 American standard AC power cable..................................................................................................30
Figure 3-12 Grounding cable ...............................................................................................................................31

Raisecom
ISCOM5508 (B) Hardware Description
Figures
Raisecom Technology Co., Ltd.
7
Figure 3-13 OT terminal ......................................................................................................................................32
Figure 4-1 1000 Mbit/s SFP optical module ........................................................................................................34
Figure 4-2 Label of the 1000 Mbit/s SFP optical module ....................................................................................35
Figure 4-3 1000 Mbit/s SFP electrical module.....................................................................................................36
Figure 4-4 PON SFP optical module....................................................................................................................37
Figure 4-5 Label of the PON SFP optical module................................................................................................37

Raisecom
ISCOM5508 (B) Hardware Description
Tables
Raisecom Technology Co., Ltd.
8
Tables
Table 1-1 Physical parameters of the ISCOM5508................................................................................................3
Table 2-1 Components of the ISCOM5508............................................................................................................4
Table 2-2 Items on the hardware information label................................................................................................7
Table 2-3 Interfaces on the EPSC card...................................................................................................................8
Table 2-4 Parameters of the Console interface.......................................................................................................9
Table 2-5 Parameters of the SNMP interface .........................................................................................................9
Table 2-6 Parameters of the GE interface based on 10/100/1000BASE-T standard ..............................................9
Table 2-7 LEDs on the EPSC card .......................................................................................................................10
Table 2-8 Technical specifications of the EPSC card........................................................................................... 11
Table 2-9 Interfaces on the EP4B sub-card .......................................................................................................... 11
Table 2-10 LEDs on the EP4B sub-card...............................................................................................................12
Table 2-11 Technical specifications of the EP4B sub-card...................................................................................12
Table 2-12 Interfaces on the GE4B sub-card .......................................................................................................13
Table 2-13 Parameters of the 1000BASE-X SFP optical interface ......................................................................13
Table 2-14 LEDs on the GE4B sub-card..............................................................................................................14
Table 2-15 Technical specifications of the GE4B sub-card..................................................................................14
Table 2-16 Interface on the RPA1101 power module...........................................................................................15
Table 2-17 LEDs on the RPA1101 power module................................................................................................16
Table 2-18 Technical specifications of the RPA1101 power module ...................................................................16
Table 2-19 Interface on the RPD1101 power module ..........................................................................................17
Table 2-20 LEDs on the RPD1101 power module ...............................................................................................17
Table 2-21 Technical specifications of the RPD1101 power module...................................................................18
Table 2-22 LEDs on the FANS306 module..........................................................................................................19
Table 2-23 Technical specifications of the FANS306 module..............................................................................19
Table 3-1 Type and usage of the fiber ..................................................................................................................20
Table 3-2 Fiber connectors...................................................................................................................................21

Raisecom
ISCOM5508 (B) Hardware Description
Tables
Raisecom Technology Co., Ltd.
9
Table 3-3 Wiring of the fiber................................................................................................................................22
Table 3-4 Wiring of the straight-through cable ....................................................................................................23
Table 3-5 Technical specifications of the Ethernet cable .....................................................................................26
Table 3-6 PIN definitions of the Console interface and RJ45 interface ...............................................................27
Table 3-7 Technical specifications of the configuration cable..............................................................................28
Table 3-8 Technical specifications of the DC power cable ..................................................................................29
Table 3-9 AC power cable of the ISCOM5508 ....................................................................................................29
Table 3-10 Technical specifications of the European standard AC power cable ..................................................30
Table 3-11 Technical specifications of the American standard AC power cable..................................................30
Table 3-12 Technical specifications of the grounding cable.................................................................................32
Table 3-13 Technical specifications of the OT terminal.......................................................................................33
Table 4-1 Model of the 1000 Mbit/s SFP optical module.....................................................................................35
Table 4-2 Technical specifications of the 1000BASE-X SFP optical module......................................................35
Table 4-3 Technical specifications of the 1000BASE-T SFP electrical module...................................................36
Table 4-4 Model of the PON SFP optical module................................................................................................37
Table 4-5 Technical specifications of the CLASS B+ optical module .................................................................38
Table 5-1 LEDs of the ISCOM5508.....................................................................................................................39
Table 6-1 Weight and power consumption of the ISCOM5508 ...........................................................................41

Raisecom
ISCOM5508 (B) Hardware Description
1 Product overview
Raisecom Technology Co., Ltd.
1
1 Product overview
This chapter describes orientation, appearance, and physical parameters of the ISCOM5508,
including the following sections:
Overview
Appearance and slots
Physical parameters
1.1 Overview
The ISCOM5508 is a next-generation, small-capacity, 1 U, and plug-in Ethernet Passive
Optical Network (EPON) Optical Line Terminal (OLT). It is oriented to industrial customers,
providing rich features and flexible networking schemes to meet low-density and long-
distance requirements for optical fiber access.
Work with the Optical Network Unit (ONU) as the OLT in EPON to construct the low-
cost, high-bandwidth, and long-distance access network, thus addressing problems of
small-and medium-scale fiber access.
Meet Fiber To The Home (FTTH) and Fiber To The Building (FTTB) networking
requirements.
Support automatically collecting information about the power grid, and meet
requirements on building the intelligent community.
Support providing Triple Play services using the single-fiber.
Meet networking requirements on bidirectional reconstruction of the Hybrid Fiber
Coaxial (HFC) network (EPON+EoC).
The ISCOM5508 can be installed in the following scenarios:
ETSI 600-mm cabinet
19-inch 450-mm cabinet
19-inch 600-mm cabinet
Open rack
Workbench

Raisecom
ISCOM5508 (B) Hardware Description
1 Product overview
Raisecom Technology Co., Ltd.
2
When installing the chassis to the 19-inch 600-mm cabinet, you need to purchase
brackets applicable to the cabinet.
1.2 Appearance and slots
1.2.1 Appearance of chassis
The ISCOM5508 is a cartridge device, which is flexible to be deployed. Dimensions of the
chassis are: 440 mm (Width) ×266 mm (Depth) ×44 mm (Height) (without brackets).
Figure 1-1 shows the appearance of the ISCOM5508 chassis.
Figure 1-1 Appearance of the ISCOM5508 chassis
1.2.2 Distribution of slots
The ISCOM5508 provides the following 6 slots:
1 Main Control Card (MCC) slot (slot 1)
2 extended sub-card slots (slot 2 and slot 3)
1 fan module slot (slot 6)
2 power module slots (slot 4 and slot 5)
Figure 1-2 shows distribution of slots on the ISCOM5508.
Figure 1-2 Distribution of slots on the ISCOM5508
1.3 Physical parameters
Table 1-1 lists physical parameters of the ISCOM5508.

Raisecom
ISCOM5508 (B) Hardware Description
1 Product overview
Raisecom Technology Co., Ltd.
3
Table 1-1 Physical parameters of the ISCOM5508
Technical specification
Description
Dimensions
440 mm (Width) ×266 mm (Depth) ×44 mm
(Height) (without brackets)
Standard
configuration
Weight
5.51 kg
Power consumption
40 W
Full
configuration
Weight
6.24 kg
Power consumption
63 W
DC power
Rated voltage
-48 VDC
Voltage range
-38 to -72 VDC
AC power
Rated voltage
110/220 VAC
Voltage range
100–240 VAC
Frequency
50/60 Hz
Standard configuration: chassis, MCC (EPSC), 2 power modules, and 1 fan
module.
Full configuration: chassis, MCC (EPSC), 2 extended sub-cards, 2 power modules,
and 1 fan module.

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
4
2 Components
This chapter describes the appearances, dimensions, and technical specifications of
components of the ISCOM5508, including the following sections:
Overview of components
MCC (EPSC)
4-EPON interface sub-card (EP4B)
4-GE interface sub-card (GE4B)
AC power module (RPA1101-SI-220S12)
DC power module (RPD1101-48S12)
Fan module (FANS306)
2.1 Overview of components
2.1.1 Classification of components
The ISCOM5508 is composed of the following four types of components:
MCC
Extended sub-card
Power module
Fan module
Table 2-1 lists components of the ISCOM5508.
Table 2-1 Components of the ISCOM5508
Component
Name
Description
MCC
EPSC
Control, management, aggregation, and
switching card
Extended sub-card
EP4B
Sub-card providing 4 EPON interfaces
GE4B
Sub-card providing 4 GE interfaces
Power module
RPA1101-SI-220S12
110/220 VAC power module

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
5
Component
Name
Description
RPD1101-48S12
-48 VDC power module
Fan module
FANS306
Fan module
2.1.2 Appearances of components
Appearance of MCC
Figure 2-1 shows the appearance of the MCC (EPSC).
Figure 2-1 Appearance of the MCC (EPSC)
Appearance of sub-card
Figure 2-2 shows the appearance of the EP4B sub-card.
Figure 2-2 Appearance of the EP4B sub-card
Figure 2-3 shows the appearance of the GE4B sub-card.

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
6
Figure 2-3 Appearance of the GE4B sub-card
Appearance of power module
Figure 2-4 shows the appearance of the power module.
Figure 2-4 Appearance of the power module
Appearance of fan module
Figure 2-5 shows the appearance of the fan module.
Figure 2-5 Appearance of the fan module

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
7
2.1.3 Hardware information label
Hardware information of ISCOM5508 components will be described by a label pasted on the
Printed Circuit Board (PCB) to facilitate you to view it, as shown in Figure 2-6.
Figure 2-6 Hardware information label on the ISCOM5508
The position of hardware information labels may be different because the layouts of
elements are different, so search for it carefully.
Table 2-2 lists items on the hardware information label.
Table 2-2 Items on the hardware information label
Item
Description
P/N
Name and type of the component
REV
Hardware version of the component, where "A" means a release
version and "00" means a build
Bar code
Bar code of the component

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
8
2.2 MCC (EPSC)
2.2.1 Introduction
The EPSC card is the main unit for accessing, processing, and switching services. It provides
4 EPON optical interfaces, 2 GE electrical interfaces (RJ45), and 4 GE optical interfaces
(SFP). Moreover, it supports managing and maintaining the ISCOM5508 through the SNMP
interface and Console interface.
2.2.2 Panel and slots
The EPSC card can be inserted into slot 1 only.
Figure 2-7 shows the panel of the EPSC card.
Figure 2-7 Panel of the EPSC card
2.2.3 Interfaces
There are 12 interfaces on the EPSC card.
Table 2-3 lists interfaces on the EPSC card.
Table 2-3 Interfaces on the EPSC card
Interface
Type
Usage
Description
CONSOLE
RJ45
Local maintenance
serial interface
RS-232 serial interface
SNMP
RJ45
Remote network
management
interface
10/100BASE-T self-adaptive
electrical interface
GE 1/2
RJ45
Ethernet service
interface
10/100/1000BASE-T self-adaptive
electrical interface
GE 3/4/5/6
SFP
Ethernet service
interface
Supported optical module type:
1000BASE-X
PON 1/2/3/4
PON SFP
EPON service
interface
Supported optical module type:
1000BASE-PX20-D
For details of the optical module, see chapter 4 Pluggable modules.
Table 2-4 lists parameters of the Console interface.

Raisecom
ISCOM5508 (B) Hardware Description
2 Components
Raisecom Technology Co., Ltd.
9
Table 2-4 Parameters of the Console interface
Parameter
Description
Connector
RJ45
Working mode
Duplex UART
Electrical features
RS-232
Baud rate
9600 Baud
Data bit
8
Parity check
None
Stop bit
1
Flow control
None
Cable specifications
8-core shielded cable
Table 2-5 lists parameters of the SNMP interface.
Table 2-5 Parameters of the SNMPinterface
Parameter
Description
Connector
RJ45
Interface rate
10/100BASE-T auto-negotiation
Wiring
Support straight-through and crossover cable self-adaption in host
mode
Compliant standard
IEEE 802.3
Table 2-6 lists parameters of the GE interface.
Table 2-6 Parameters of the GE interface based on 10/100/1000BASE-T standard
Parameter
Description
Connector
RJ45
Working mode
10/100/1000 Mbit/s auto-negotiation
Full duplex and half duplex auto-negotiation
Cable specifications
When the working mode is 10 Mbit/s or 100 Mbit/s, we
recommend using the Cat 5 UTP cable.
When the working mode is 1000 Mbit/s, we recommend
using Cat 5 better STP cable.
Compliant standard
IEEE 802.3
Supported network protocol
IP