Raymarine Ray240 User manual

UP
RAY 240 VHF
Radio Loudspeaker
FLUSH MOUNT
Template
Remove material
from shaded area only
Drill hole,
20 mm (4/5 in)
diameter in
4 positions
112 mm (4.4 in )
113 mm (4.45 in)
Surface mount template on reverse
Flush mount speaker template
How do I install the handset connector?.......
Step 1 Step 2
Step 3 Step 4
Use appropriate
drill bit for
pilot holes
Ensure flat edge is located to
left side for correct orientation
Note: Remove protective cover
from each side of gasket
25 mm hole saw No.4 x 3/8"screw
How do I install the cradle?.......
Step 1 Step 2 Step 3
x2
x2
x2
Use appropriate drill
bit for pilot holes
No.8 x 3/4"screw (x2)
D7158-1 D7160-1
D7159-1 D7161-1
Step 1
Step 3
Step 2
Check
How do I install the transceiver?....
50mm
A 50 mm space must be left around the
unit to ensure adequate airflow
x4
x4
x4 Use appropriate
drill bit for
pilot holes
Vertical
Check
No.8 x 3/4"screw (x4)
Minimum 1.0 m (3 ft)
Keep the transceiver away from....
Pozi-drive
screwdriver
Power Drill Jigsaw
Pencil
Adhesive tape
20mm, 25mm and 86 mm
hole saws
5mm Drill
What do I need to fit it?....
Ray240 VHF Radio
Installation Guide
Whats in the box?.......
www.raymarine.com
RAY 240
User
Manual
Transceiver
Handset Handset
Cradle
Active
speaker
Gasket
set
Connector plate
Mounting
bracket
Dust
cover
Handbook
Quick reference
guide
Screw,
No.8 x 3/4"(x6)
Stud (x2) Thumb nut (x2)
Screw,
No.4 x 3/8"(x3)
Power/NMEA/Hailer cable
5 m extension cable
RAY 240
RAY 240
User Guide
VHFRadio with DSC
VesselName
MMSINumber
CallSign
DocumentNo:86088_1
All manuals and user guides at all-guides.com
all-guides.com

D7162-1 D7164-1
D7163-1
D7165-1
Please recycle after use
Raymarine Limited
Robinson Way, Anchorage Park
Portsmouth, Hampshire
England PO3 5TD
Tel: + 44 (0)23 9269 3611
Fax: + 44 (0)23 9269 4642
www.raymarine.com
Raymarine Incorporated
22 Cotton Road, Unit D
Nashua, New Hampshire 03063 - 4219
USA
Tel: [phone]
Fax: [phone]
www.raymarine.com
Flush mount template on reverse
Surface mount speaker template
RAY 240 VHF
Radio Loudspeaker
SURFACE MOUNT
Template
Cut hole
86 mm (3.38 in)
diameter
Drill hole,
5 mm (3/16 in)
diameter in
2 positions
Remove material
from shaded areas only
UP
30.1 mm (1.185 mm) 30 mm (1.18 mm)
47.68 mm (1.88 in) 42 mm (1.65 in)
D87015-1
RAY 240 VHF
Radio Loudspeaker
SURFACE MOUNT
Template
Cut hole
86 mm (3.38 in)
diameter
Drill hole,
5 mm (3/16 in)
diameter in
2 positions
Remove material
from shaded areas only
UP
30.1 mm (1.185 in) 30 mm (1.18 in)
47.68 mm (1.88 in) 42 mm (1.65 in)
How do I surface mount the active speaker?....
RAY 240 VHF
Radio Loudspeaker
SURFACE MOUNT
Template
Cut hole
86 mm (3.38 in)
diameter
Drill hole,
5 mm (3/16 in)
diameter in
2 positions
Remove material
from shaded areas only
UP
30.1 mm (1.185 in) 30 mm (1.18 in)
47.68 mm (1.88 in) 42 mm (1.65 in)
Step 1
Step 4
Step 2 Step 3
x2
Note: Remove protective cover
from each side of gaskets
How do I flush mount the active speaker?....
UP
RAY 240 VHF
Radio Loudspeaker
FLUSH MOUNT
Template
Remove material
from shaded area only
Drill hole,
20mm (4/5 in)
diameter in
4 positions
112 mm (4.4 in)
113 mm (4.45 in)
UP
RAY 240 VHF
Radio Loudspeaker
FLUSH MOUNT
Template
Remove material
from shaded area only
Drill hole,
20 mm(4/5 in)
diameter in
4 positions
112 mm (4.4 in )
113mm(4.45 in)
Step 1
Step 2 Step 3
Step 4
x4
Note: Remove protective cover
from each side of gasket
All manuals and user guides at all-guides.com