Raymarine Ray240 User manual

Ray240 VHF
Radio
with Digital
Selective Calling
Users Manual
Document # 81219_4
Date: July 2006
81219_4.book Page 1 Tuesday, June 27, 2006 1:07 PM

© Copyright - Raymarine 2006
Trademarks and registered trademarks
Autohelm, HSB Raymarine, RayTech, RayTech RNS, Sail Pilot,
SeaTalk and Sportpilot are registered trademarks of Raymarine
Limited.Apelco is a registered trademark of Raymarine Holdings
Limited (Registered in all major marketing territories).
AST, Autoadapt, Auto GST, Autoseastate, Autotrim, Bidata,
Marine Intelligence, Maxiview, On Board, Raychart, Raynav,
Raypilot, Raystar, ST40, ST60, Seaclutter, Smart Route, Tridata
and Waypoint Navigation are trademarks of Raymarine Limited.
All other product names mentioned are trademarks or registered
trademarks (if applicable) of their respective companies.
www.raymarine.com
81219_4.book Page 2 Tuesday, June 27, 2006 1:07 PM

How to make an automatic Distress call i
How to make an automatic Distress call
DISTRESSDISTRESSDISTRESSDISTRESS DISTRESSDISTRESS
LAST/
WX MENU
OK
MEM
SQ
WATCH
12
ABC
5
JKL
8
TUV
0
*
6
MNO
4
GHI
7
PQRS 9 WXYZ
3
DEF
SCAN
16/9 1/25
CH
RAY240
PRESS and
HOLD for 5 SECONDS
FOR
ACKNOWLEDGEMENT
Step 1 Step 2
Step 6
Step 3
Slide up cover
10
15
20
25
30
35
40
45
5055 60 5
Step 5
Step 4
5 second
countdown
commences
Display
backlight
flashes
SLOWLY
and
CLEARLY
Press
and
Hold
PTT
THEN
SPEAK
MAYDAY, MAYDAY, MAYDAY
This is.... (repeat name of vessel 3 times)
MAYDAY
THIS IS.... (name of vessel spoken once)
MY POSITION IS.... (latitude and longitude) or
true bearing and distance from a known point).
IF YOU DON'T KNOW, DON'T GUESS.
I AM.... (sinking, on fire, etc)
I HAVE.... (number of persons on board and any
other information - drifting, flares fired, etc )
I REQUIRE IMMEDIATE ASSISTANCE
OVER
RELEASE THE PTT SWITCH
LISTEN
D6788_1
DISTRESS
16
V0:10
SQ:05
25W
RX
Transmitting the
Distress and activating
automatic
distress mode
DISTRESS
auto DISTRESS TX
5
81219_4.book Page i Tuesday, June 27, 2006 1:07 PM

ii
How to make a Mayday call
16/9
LAST/
WX MENU
OK
MEM
SQ
WATCH
12
ABC
5
JKL
8
TUV
0
*
6
MNO
4
GHI
7
PQRS
9
WXYZ
3
DEF
SCAN
16/9 1/25
CH
RAY240
Step 1
Step 2
Step 3
SLOWLY and CLEARLY
THEN
MAYDAY, MAYDAY, MAYDAY
This is.... (name of vessel, spoken 3 times)
MAYDAY
This is....(name of vessel spoken once)
MY POSITION IS....(latitude and longitude.
or true bearing and distance from a known
point - IF YOU DON'T KNOW, DON'T GUESS).
I AM....(sinking, on fire, etc)
I HAVE.... (number of persons on board and
any other information - drifting, flares fired, etc)
I REQUIRE IMMEDIATE ASSISTANCE
OVER
RELEASE THE PTT SWITCH
FOR ACKNOWLEDGEMENT AND INSTRUCTIONS
IF AN ACKNOWLEDGEMENT IS NOT RECEIVED
THEN REPEAT THE DISTRESS CALL
16
V0:10
SQ:05
25W
RX
D6790_1
Press
and
Hold
PTT
16
V0:10
SQ:05
25W
RX
81219_4.book Page ii Tuesday, June 27, 2006 1:07 PM

1
Contents
Important Information ................................................................................................ 3
Safety notices .................................................................................................3
Purpose ...........................................................................................................4
FCC Notice ......................................................................................................4
EMC conformance ..........................................................................................4
Declaration of conformity ...............................................................................5
Licensing requirements ...................................................................................5
Additional Information ...................................................................................6
Maritime Mobile Service Identity .................................................................... 6
Automatic Transmission Identification System ............................................... 7
Waste Electrical and Electronic Equipment Directive ......................................7
Handbook information ...................................................................................7
Warranty .........................................................................................................8
Chapter 1: General Information .........................................................................9
1.1 What is the Ray240? ..............................................................................9
1.2 What is DSC? .......................................................................................... 9
1.3 Can I use the Ray240 as part of an integrated system? ........................ 10
1.4 How do I use the Ray240? .................................................................... 11
Chapter 2: Operations ........................................................................................17
2.1 Introduction ......................................................................................... 17
2.2 The handset controls ............................................................................ 17
....power the radio On and Off? ...................................................... 17
....adjust the handset volume? ....................................................... 17
....set the squelch? ......................................................................... 18
....change channels? ...................................................................... 18
....tune to the priority channel? ...................................................... 18
....get the weather forecast? .......................................................... 19
....select private channels? ............................................................. 19
...monitor channels? ...................................................................... 19
....scan the channels? ..................................................................... 20
....use the Memory? ....................................................................... 20
....change the transmitting power? ................................................ 20
....navigate the menus? .................................................................21
....use the Menu shortcuts? ............................................................22
....adjust the active speaker volume? ............................................. 22
2.3 Using the handset - station control ...................................................... 23
2.4 Using the handset ................................................................................ 24
....use the intercom? ...................................................................... 24
....view phone book details? .......................................................... 24
....add an entry to the DSC phone book? ........................................ 25
2.5 Using the handset -making and receiving DSC calls ............................26
....make an individual routine call? ................................................ 26
81219_4.book Page 1 Tuesday, June 27, 2006 1:07 PM

2 Ray240 User Manual
....make a group routine call? .........................................................27
....make a specified Distress call? ...................................................28
....cancel a Distress call? .................................................................29
....receive a distress acknowledgement .........................................30
....receive a distress call? ...............................................................31
....make an All Ships Safety call? .....................................................32
How do I .........................................................................................33
....make an AllShips Urgency call? .................................................33
....make a position request? ...........................................................34
....receivea position request? .........................................................35
....access the DSC call log? .............................................................35
....delete an entry from the DSC call log? ........................................36
2.6 Receiving weather alerts ......................................................................36
2.7 Additional functions .............................................................................36
Intercom .........................................................................................37
Fog warnings ..................................................................................37
....set up the automatic fog signal? ................................................38
Hailer ..............................................................................................38
Radio Sensitivity .............................................................................39
Handset Settings ............................................................................39
Chapter 3: Installation .......................................................................................41
3.1 EMC Installation Guidelines .................................................................41
3.2 What’s in the box? ................................................................................42
3.3 Where should I install my radio? ...........................................................43
3.4 Typical installation ................................................................................46
3.5 How much space does the Ray240 need? .............................................47
3.6 How do I make the electrical connections? ...........................................48
3.7 How do Iget position data? ..................................................................50
3.8 Setting up the Ray240 ..........................................................................51
....enter my boat’s MMSI number? .................................................51
....enter my ATIS number? ..............................................................52
Chapter 4: Maintenance and Troubleshooting ..............................................53
4.1 Introduction ..........................................................................................53
4.2 What maintenance can I do? ................................................................53
4.3 How do I troubleshoot the Ray240? .....................................................53
4.4 How do I get technical support? ...........................................................54
Appendix 5: VHF Channels .................................................................................55
Appendix 6: Technical specification .................................................................63
Appendix 7: Hints and Tips .................................................................................65
Appendix 8: List Of Abbreviations ....................................................................67
81219_4.book Page 2 Tuesday, June 27, 2006 1:07 PM

Important Information 3
Important Information
Safety notices
WARNING
Electrical safety
Make sure the power supply is switched off before you make
any electrical connections.
WARNING
Electromagnetic exposure
Failure to observe the Antenna and EME Exposure guidelines
may expose those within the Maximum Permissible Exposure
radius to RF radiation absorption that exceeds the FCC MPE
limit. It is the Radio Operator’s responsibility to ensure that no
one is within this radius before transmitting.
WARNING
Navigation aid
Although we have designed this product to be accurate and reliable,
many factors can affect its performance. As a result, it should only be
used as an aid to navigation and never replace common sense and
navigational judgement. Always maintain a permanent watch so you
can respond to situations as they develop.
CAUTION
Compass safe distance
The compass safe distance for any part of the Ray240
installation including transceiver, handset and speaker,
measured in accordance with EN 60945, for the Ray240 is 0.9 m.
81219_4.book Page 3 Tuesday, June 27, 2006 1:07 PM

4
Purpose
This handbook contains important information on the installation, operation and
maintenance of the US and European versions of the Ray240 VHF radio, which is
intended for light marine use and covers the following models:
•E42001 Ray240 System - US and Canadian version.
•E42002 Ray240E System - European version.
To get the best results in operation and performance, please take the time to read
this handbook thoroughly.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications to thisequipment,notexpresslyapprovedin writingby
Raymarine Inc., could violate compliance with FCC rules and void the operator’s
authority to operate the equipment.
EMC conformance
All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility (EMC)
standards, but correct installation is required to ensure that performance is not
compromised.
Antenna mounting and EME exposure
Ensure that the antenna is connected to the radio before transmitting.
Raymarine declares a Maximum Permissible Exposure (MPE) radius of 1.5 meters
(per OET Bulletin 65) for this system, assuming 25 watts output to an
omnidirectional antenna of 3dBi gain or less.
For watercraft with suitable structures, the antenna base must be at least 3.5
meters above the main deck to meet the MPE for persons up to 2 meters tall. For
watercraft withoutsuch structures, the antenna must be mounted so that itsbase
is a minimum of 1.5 meters vertically from the heads of all persons.
81219_4.book Page 4 Tuesday, June 27, 2006 1:07 PM

Important Information 5
DonottransmitwhenanyoneiswithintheMPEradiusof theantenna,unlessthey
are shielded from the antenna field by a grounded metallic barrier.
Declaration of conformity
Raymarine UK Limited hereby declare that the products to which this handbook
relates comply with the appropriate rquirements and provisions of the R&TTE
Directive 1999/5/EC.
The full Declaration of Conformity may be viewed on the relevant product pages
at www.raymarine.com
Licensing requirements
United States
An Operator License is not requiredto operate a VHF Marine Radiowithin US
territorial waters.However, a license is requiredto operate the radio if youdock in
a foreign port (including Canada and Mexico) or leave a foreign port to dock in a
US port. You can request a Restricted Radiotelephone Operator Permit from the
Federal Communications Commission (FCC) by filing Form 753.
Canada
A license is not required to operate this radio within the sovereign waters of
Canada. You will require a license to operate thisradio outside of these waters.To
obtain Industry Canada licensing information,contact the nearest field or
regional office or write to:
Industry Canada
Radio Regulatory Branch
300 Slater Street
Ottawa
Ontario
Canada, K1A 0C8
Attention: DOSP
Europe
Regulations in some areas require that an Operator’s license is obtained before
operating a VHF radio. It is your responsibility to determine whether a license is
required in your area before operating this equipment.
81219_4.book Page 5 Tuesday, June 27, 2006 1:07 PM

6
Additional Information
The following additional information will be required for completing a license
application in Canada or the US:
Maritime Mobile Service Identity
A nine-digit Maritime Mobile Service Identity (MMSI) number is required to
operate the Digital Selective Calling (DSC) equipment in this radio.
United States
You can request an MMSI number from the FCC when you apply for a Station
License. If your vessel does not require a license, you may obtain an MMSI by
contacting either:
BoatUS (www.boatus.com), or
MariTEL (www. maritelusa.com).
Once obtained,you can program the MMSI number into your Ray240using the
Menu Operation described in this handbook.
Canada
You can obtain an MMSI number from your nearest Industry Canada Office.
Once obtained you canprogram the MMSI number intoyour Ray240 using the
Menu Operation described in this handbook.
Europe
An MMSI number should be requested from the same agency that issues radio
operator licenses in your area.
Once obtained,you can program the MMSI number into your Ray240using the
Menu Operation described in this handbook.
Industry Canada Certification Number IC: 4069B-RAY240D
FCCID PJ5RAY240
FCC Type Accepted Parts 2,15 and 80
Output Power 1 watt (low), 25 Watts (high)
Modulation Frequency
Frequency Range 156.000 - 165.000 MHz
81219_4.book Page 6 Tuesday, June 27, 2006 1:07 PM

Important Information 7
If regulations in your area do not permit you to program the MMSI number
yourself, your Raymarine dealer can program the number for you.
For full details of programming your MMSI number into the Ray240 - see
Chapter 3:Installation .
Automatic Transmission Identification System
Some European inland waterways require the use of the AutomaticTransmission
Identification System (ATIS). An ATIS number can be requested from the same
agency that issues radio operator licenses in your area.
The ATIS function must be enabled by yourRaymarine dealer before you can enter
an ATIS number into your Ray240.
Waste Electrical and Electronic Equipment Directive
The Waste Electrical and Electronic Equipmwent (WEEE) Directive requires the
recycling of waste electronic and electricalequipment. Whilst the WEEE Directive
does notapply to some of Raymarine’s products, we supportits policy and ask yu
to be aware of how to dispose of this product.
The crossed out wheeliebin symbol, illustrated above, and foundon our product
signifies that the product should not be disposed of in general waste or landfill.
Please contact your local dealer, national distributor or Raymarine Technial
Services for information on product disposal.
Handbook information
To the best of our knowledge, the information in this handbook was correct as it
went to press. However, our policy of continuous product improvement and
updatingmaychangespecificationswithoutpriornotice.Asa result,unavoidable
differences between the product and handbook may occur from time to time.
Raymarine cannot accept liabilityfor any inaccuracies or omissions it may
contain.
For the latest product information visit our website:
www.raymarine.com
81219_4.book Page 7 Tuesday, June 27, 2006 1:07 PM

8
Warranty
To register your new Raymarine product, please take a few minutes to fill out the
warranty card. It is important that you complete the owner informationand
return the card to us to receive full warranty benefits.
81219_4.book Page 8 Tuesday, June 27, 2006 1:07 PM

9
Chapter 1: General Information
1.1 What is the Ray240?
The Ray240 is a combined VHF radio and Class D Digital Selective Calling (DSC)
system, using a phone style handset to access and control all functions. It enables
you to make digitally selected calls, which arequicker and simpler to make than
traditional voice calls using Channel 16. Itcan transmit and receive on all
available US, Canadian and International Marine VHF channels.
Should a distress situation occur, using the Ray240 you canquickly raise an alert,
automatically indicating your identity and position, and establishing distress
communication on the emergency voicechannel.
1.2 What is DSC?
The present VHF radio system requires users to listen until someone speaks, and
then determine whether the call is for them - more often than not, it isn’t. DSC
makes sure that you receive messages, and alerts you to the fact that it is for you.
DSC is part of the Global Maritime Distress and Safety System (GMDSS), a
maritime communication system - not just for emergency and distress messages,
but also for all types of existing ship-to-ship and ship-to-shore routine
communications.
DSC is simplya tone signalling system, which operates on VHF Channel 70 and is
similar tothe tone dialling on your phone, but with the ability to include other
information such as your boat’s identification number, the purpose of the call,
your position and the channel you want to speak on.
DSC calls can be divided intofourcategories:
• Calls to other ships.
• Group calls.
• Safety broadcasts.
• Distress alerts.
Calls to other ships
To call another ship or a coast station, you simply enter their dedicated Maritime
Mobile Service Identity (MMSI) number, select your chosen VHF working channel
and send the call -it’s like using a telephone. Both your radio and the one you are
calling automaticallyswitch to the chosen channel for conversation.
81219_4.book Page 9 Tuesday, June 27, 2006 1:07 PM

10
Group calls
When groups of ships need the same information (yacht races, club rallies etc.) a
special group-call identity can be used to enable restricted broadcast messages.
Safety broadcasts
Safety broadcasts from coast stations and other shipping automatically generate
an alert to ensure that this vital informationis not missed.
Distress alerts
At the touch of a button, you can send your ships identity, your position and the
nature of your distress. The position given will be precise and the alert will be
heard immediately by all DSC equipped vessels and coast stations within range.
The message is automatically repeated at approximately 4 minute intervals until
it is acknowledged either by a coast station or a vessel within radio range.
Note: To transmit precise positions, the radio must beinterfaced to your Global Position-
ing System (GPS). Otherwise, regular manual position updating is required.
1.3 Can I use the Ray240 as part of an integrated system?
Your Ray240can sendand receiveposition information, e.g.latitude and
longitude, using either of the following protocols:
• National Maritime Electronics Association (NMEA) 0183.
• SeaTalk
enabling DSC integration with other instruments.
Using theseprotocolsenables yourRay240 to send position information to other
instruments in your system whenever it receives:
• a response to a DSC position request.
• a DSC Distress call.
You can also add an additional handset and active speaker to the standard
Ray240, giving two fully functional stations with an intercom function. This is
particularlyusefulwhereyourboathasdualhelmsor asecondnavigationstation.
81219_4.book Page 10 Tuesday, June 27, 2006 1:07 PM

11
1.4 How doI usethe Ray240?
You can accessallof the functions oftheRay240, withthe exception of adjusting
the active speaker volume, from the handset. The clearly marked buttons and
alpha-numeric keypad make operation simple.
The DISTRESS button can be found beneatha sliding cover on the back of the
handset. By simply sliding the cover up and pressing the button, the DSC Distress
Call procedure is started.
DISTRESS
WX
MEM
SQ
WATCH
12
ABC
5
JKL
8
TUV
0
*
6
MNO
4
GHI
7
PQRS 9 WXYZ
3
DEF
CH
RAY240
L
N
5
1
S
1
2
3
4
5
6
7
8
9
10
11
12
Front Back
RAY240 HANDSET
Product Code: E32002
Input: 11.6 - 15.6 VDC
Raymarine Ltd
Portsmouth PO3 5TD England
FCC ID PJ5RAY240
IC: 4069B-RAY240
D6741_1
DISTRESS
81219_4.book Page 11 Tuesday, June 27, 2006 1:07 PM

12
1. CHANNEL UP/DOWN moves the selected channel up or down, or scrolls
through the menus.
2. MENU Press to access the menus, or to select a menu option. Press and hold to
access the phone book.
3. 1/25 changes the transmitting power setting from 1 watt (low) to 25 watt
(high) or vice versa.
4. WATCH Press to activate the Dual Watch function (2 channels). Press and hold
to activate the Tri-Watch function (3 channels).
5. SQUELCH mutes any background noise. Alsoused for the backspace function
when making alpha-numeric entries.
6. Key pad The alpha-numeric keypad has multi-tap operation, the same as a
mobile phone.
7. MEMORY commits a channel to the radio memory.
8.SCAN startsthescanningofavailablechannels. Presstostartpriorityscanning.
Press and hold to start non-priority scanning.
9. 16/9 (16) Press to power up the radio. Press and hold for 5seconds to power off
the radio. When using the radio, press to re-tune to the priority channel.
10. LAST/WX (PRIV) Press to return to either the last selected channel, or when
navigating the menus to return to the previous screen. Press and hold to access
the Weather channels. (Press and hold to access private channels).
11. Push to Talk Press and hold to send a voice message. Release to return to
receive mode.
Note: The maximum transmit time is limited to 5 minutes to prevent non-intentional
transmissions from occupying the VHF channel.
12. Volume adjusts the volume of the handset up or down.
Note: Differences for European versions of the radio are shown in brackets.
81219_4.book Page 12 Tuesday, June 27, 2006 1:07 PM

13
Which menu do I need?
Notes: (1) A Maritime Mobile Service Identity (MMSI)number is required to operate
DSC functions.
(2) ATISfunction only available on European models. An Automatic
Transmission Identification System (ATIS) number is required to operate.
(3) ATIS Inland (Waterways)Mode - transmit power is limited to 1W on
Channels 6, 8, 10, 11, 12, 13, 14, 15, 17, 71, 72, 74, 75 76 and 77 in
accorance with regulations for European Inland Waterways.
(4) ATISSea Mode - transmit power restrictions are disabled foruse at sea.DO
NOT use this mode when operating on European Inland Waterways.
Main Menu
Intercom/Hailer/Fog
Phone book
VHF Operations
DSC Operations
ATIS
Settings
System Information
Clear Memory
Radio Sensitivity
Call
Call All Ships
Call log
Position
Position Request
Settings
ATIS Number
Intercom
Hailer
Foghorn
Backlighting
Key beep
Show GPS data
1
D6742_2
Software
Hardware
Urgency
Safety
My MMSI Group
My MMSI
2
Add new entry
Select name from list
Call
Position request
View
Delete
Auto
Manual
USA
Canada
International
Frequency Group
Distant
Local
ATIS Information
ATIS Mode 3 & 4
81219_4.book Page 13 Tuesday, June 27, 2006 1:07 PM

14
What does the display tell me?
The liquid crystal display (LCD) screen will give you the following information
depending on which screen you choose to display:
Memory mode
shows when available channels are
selected from the memory.
Operating mode
shows which operating mode the radio is
in., transmit (TX) or receive (RX).
ATIS Status
when shown indicates ATIS is active.:
ATIS - Inland (Waterways ) mode
SEA - Sea mode
Radio sensitivity
shows when Local sensitivity level selected.
GPS Status
GPS OK - indicates position data available.
NO GPS - indicates no GPS data available.
Foghorn
shows when automatic foghorn is running.
Volume level
shows the current volume level.Adjustable
from 0 to 10.
Frequency group
shows selectedfrequency group,USA, Can-
ada or International.
Squelch level
shows the current squelch level. Adjustable
from 0 to 10.
Active channel
shows the channel on which the radio is
currently operating.
Power setting
shows the power level. 1 Watt (low) or 25
Watts (high).
GPS Data
when available shows current position.
Volume level
Squelch level
Power setting/
Operating mode
Foghorn
D8061_1
16
V0:10
SQ:05
25W RX
FOG
LOCAL INT 10:26
16
V0:10
SQ:05
25W RX
RX
INT 10:26
52 01.234N
002 00.000W
GPS Status
ATIS Status
Memory mode MEMORY
ATIS
GPS OK
MEMORY
ATIS
GPS OK
Radio
sensitivity
Frequency
group
GPS
Data
Active
channel
Default screen Optional GPS Data screen
M M
Time
Channel
in Channel list
81219_4.book Page 14 Tuesday, June 27, 2006 1:07 PM

15
81219_4.book Page 15 Tuesday, June 27, 2006 1:07 PM

16
81219_4.book Page 16 Tuesday, June 27, 2006 1:07 PM