Razer Nari Ultimate Use and care manual

RAZER NARI
MASTER GUIDE

FOR GAMERS. BY GAMERS.™
1
The Razer Nari Ultimate is the wireless gaming headset equipped
with HyperSense technology for an additional layer of immersion. The
swiveling earcups are equipped with cooling gel-infused cushions with
memory foam that reduce heat buildup for comfortable gaming. THX
Spatial Audio delivers next-generation virtual surround sound, while
Game/Chat Balance in wireless mode provides the perfect mix of
game and chat volume. The headset also functions in wired mode
with both USB and 3.5 mm analog options. Powered by Razer
Chroma™.

FOR GAMERS. BY GAMERS.™
2
CONTENTS
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS ........................................................3
2. REGISTRATION / TECHNICAL SUPPORT .........................................................................4
3. TECHNICAL SPECIFICATIONS...........................................................................................5
4. DEVICE LAYOUT.................................................................................................................6
5. SETTING UP YOUR RAZER NARI ULTIMATE....................................................................7
6. USING YOUR RAZER NARI ULTIMATE............................................................................12
7. INSTALLING RAZER SYNAPSE 3 FOR YOUR RAZER NARI ULTIMATE........................15
8. CONFIGURING YOUR RAZER NARI ULTIMATE VIA RAZER SYNAPSE 3.....................16
9. SAFETY AND MAINTENANCE ..........................................................................................29
10. LEGALESE.......................................................................................................................30

FOR GAMERS. BY GAMERS.™
3
1. PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
▪Razer Nari Ultimate gaming headset
▪USB wireless transceiver
▪Charging cable
▪3.5mm combo cable
▪Important Product Information Guide
SYSTEM REQUIREMENTS
HARDWARE REQUIREMENTS
▪Devices with a USB port
▪Mobile devices with a 3.5mm combo port
RAZER SYNAPSE 3 REQUIREMENTS
▪Windows® 7 64-bit (or higher)
▪Internet connection
▪500 MB of free hard disk space

FOR GAMERS. BY GAMERS.™
4
2. REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your product online at razerid.razer.com/warranty to get real-time information on
your product’s warranty status.
If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide
range of Razer benefits.
TECHNICAL SUPPORT
▪1 year limited manufacturer’s warranty.
▪Free online technical support at support.razer.com.
Your product’s serial number can be found
underneath the leatherette cushion, as shown
here.

FOR GAMERS. BY GAMERS.™
5
3. TECHNICAL SPECIFICATIONS
HEADPHONES
▪Frequency response: 20 Hz –20 kHz
▪Impedance: 32Ω at 1 kHz
▪Sensitivity (@1 kHz): 107 ± 3 dB
▪Input power: 30 mW (Max)
▪Drivers: 50 mm, with Neodymium magnets
▪Inner ear cup diameter: Width 56mm / Length 67mm
▪Oval ear cushions: Designed for full-ear coverage with cooling gel, perfect for long-
wearing comfort
▪Connection type: Wireless USB Transceiver / 3.5mm analog
▪Wireless range: 12 m / 40 ft
▪Wireless frequency: 2.4 GHz
▪Analog connection: 4 –pole
▪Battery life: 8 hours with Razer Chroma lighting and HyperSense / 24 hours without
Razer Chroma lighting and HyperSense
MICROPHONE
▪Frequency response: 100 –6.5 kHz
▪Signal-to-noise ratio: > 50 dB
▪Sensitivity (@1 kHz): -42 ± 3 dB
▪Pick-up pattern: Unidirectional
LOFELT L5 HAPTIC
▪1 in each earcup
▪Frequency Response: 20 –200 Hz
▪Maximum Generated Force: 4.3 G
▪Intelligent Digital Signal Processing

FOR GAMERS. BY GAMERS.™
6
4. DEVICE LAYOUT
A. Auto-adjusting headband
B. Cooling gel-infused ear cushions
C. 50mm drivers with HyperSense
Technology
D. Razer Chroma backlighting
E. Mic mute indicator
F. Retractable mic
G. Transceiver storage
H. USB wireless transceiver
I. Volume control
J. 3.5mm combo port
K. Charging port
L. Power button
M. Status indicator
N. Game/Chat balance
O. Mic mute button
P. Charging cable
Q. 3.5mm combo cable

FOR GAMERS. BY GAMERS.™
7
5. SETTING UP YOUR RAZER NARI ULTIMATE
CHARGING YOUR HEADSET
Connect your Razer Nari Ultimate to a powered USB port using the charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted
unit will fully charge in about 4 hours.
UNDERSTANDING THE CHARGING NOTIFICATIONS
Your Razer Nari Ultimate will send out notifications depending on its current charging status,
as shown here:
STATUS
INDICATOR
SOUND INDICATOR
DESCRIPTION
Static red
None
Charging/low
battery
Static green
None
Fully charged/full
battery
Blinking red
Warning tone
Battery is critically
low

FOR GAMERS. BY GAMERS.™
8
CONNECTING TO YOUR PC VIA USB PORT
1. Plug the USB wireless transceiver to your PC.
2. Right-click on the sound icon on the system tray, and then select Sounds.
3. On the Playback tab, select Razer Nari Ultimate - Chat from the list, and then set it as
the Default Communication Device.

FOR GAMERS. BY GAMERS.™
9
4. On the Playback tab, select Razer Nari Ultimate - Game from the list, and then set it
as the Default Device.
5. In the Recording tab, select Razer Nari Ultimate - Chat from the list and click the ‘Set
Default’ button.