Razer RZ04-0322 User manual

Dat: 06 May 2020
Product Manual for Gaming Headset
Model: RZ04-0322
.

WHAT’S INSIDE / WHAT’S NEEDED
WHAT’S INSIDE
Gaming Headset (Model: RZ04-0322)
djustable padded headband
ltra-soft breathable memory
foam ear cushions
olume knob
.5 mm audio + mic jack
harging port
tatus indicator
ic mute button
H. Power button
Removable RazerTM HyperClear
Supercardioid Mic
FOR GAMERS. BY GAMERS.™1

USB wireless transceiver
Charging cable
3.5 mm combo cable
Important Product Information Guide
WHAT’S NEEDED
PRODUCT REQUIREMENTS
PC with a free USB port
Devices with 3.5 mm combo jack*
RAZER SYNAPSE REQUIREMENTS
Windows® 7 64-bit (or higher)
Internet connection for software installation
*Compatible with PC / Mac / Switch / PS4 / Xbox One (Xbox One Stereo Adapter may be
required, purchased separately).
FOR GAMERS. BY GAMERS.™1

LET’S GET YOU COVERED
You’ve got a great device in your hands, complete with a 2-year limited warranty coverage.
Now maximize its potential and score exclusive Razer benefits by registering at
razerid.razer.com
Got a question? Ask the Razer Support Team at support.razer.com
Your product’s serial
number can be found
h
FOR GAMERS. BY GAMERS.™1

GETTING STARTED
CHARGING YOUR HEADSET
Connect your Razer BlackShark V2 Pro to a powered USB port using the charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted
unit will fully charge in about 3 hours.
STATUS INDICATOR BEHAVIORS
When plugged in When unplugged
Indicator
Battery Status
Blinking green
Charging
FOR GAMERS. BY GAMERS.™2

Static green
Fully charged
CONNECTING YOUR HEADSET
A. TO YOUR PC VIA USB PORT
1. Plug the USB wireless transceiver to your PC.
2. Press and hold the power button until the status indicator is lit, or until you hear a tone.
Indicator
Sound
Battery Status
Static green
None
Fully
charged
Slow blinking
red
Warning
tone
Low (30%)
Rapid blinking
red
Warning
tone
Critical(10%)
FOR GAMERS. BY GAMERS.™3

3. Wait until the status indicator briefly becomes static blue indicating that the headset is
now connected to the USB wireless transceiver.
Indicator Status
Blinking blue
Pairing
Static blue Connected
4. On your PC, right-click on the sound icon on the system tray, and then select Sounds.
5. On the Playback and Recording tabs, set Razer BlackShark V2 Pro as the Default
Device.
FOR GAMERS. BY GAMERS.™4

Your headset is now ready to use.
B. TO OTHER DEVICES VIA USB PORT
Plug the USB wireless transceiver to your device and make sure your Razer BlackShark V2
Pro is the default input and output audio device.
C. TO DEVICES VIA 3.5MM COMBO PORT
If your device has a 3.5mm audio + mic combined jack, simply plug the 3.5mm combo cable
from your headset to your device’s audio jack.
FOR GAMERS. BY GAMERS.™5

POWER BUTTON FUNCTIONS
Power ON/OFF
Power on or off your headset by holding the power button for at least 3 seconds or until you
hear 2 short beeps.
Play / Pause a track
While powered on, press the power button to play or pause the current track.
Next track Previous track
While powered on, double press the power
button to go to the next track.
While powered off, triple press the power
button to go to the previous track.
ADJUSTING THE VOLUME
Rotate the volume knob as shown to increase or decrease the volume.
FOR GAMERS. BY GAMERS.™6

USING THE RAZERTM HYPERCLEAR SUPERCARDIOID MIC
Plug the RazerTM HyperClear Supercardioid Mic to the headphone and bend until it is parallel
to your mouth. Make sure the mic diaphragm is in front and the air vent is facing away from
your mouth.
MUTING / UNMUTING THE MICROPHONE
Press the mic mute button to mute or unmute the microphone.
FOR GAMERS. BY GAMERS.™1