Razer RZ04-0269 User manual

Date: 20
September
2018
USER MANUAL FOR GAMING HEADSET
SYSTEM MODEL RZ04-0269, CONTAINTS
Gaming Headset MODEL RC30-026901 AND
WIRELESS USB TRANSCEIVER RC30-026902

FOR GAMERS. BY GAMERS.™ 1
PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
Gaming Headset (System model RZ04-0269, contains Gaming Headset model
RC30- 0268901 and USB WIRELESS TRANSCEIVER RC30-026902)
WIRELESS USB TRANSCEIVER
Charging cable
Important Product Information Guide
SYSTEM REQUIREMENTS
HARDWARE REQUIREMENTS
Devices with a USB port
RAZER SYNAPSE 3 REQUIREMENTS
Windows® 7 64-bit (or higher)
Internet connection
500 MB of free hard disk space

FOR GAMERS. BY GAMERS.™ 2
2. REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your product online at razerid.razer.com/warranty to get real-time information on your
product’s warranty status.
If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of
Razer benefits.
TECHNICAL SUPPORT
1 year limited manufacturer’s warranty
Free online technical support at support.razer.com
Your product’s serial number can be found
underneath the ear cushion, as shown here.

FOR GAMERS. BY GAMERS.™ 3
DEVICE LAYOUT
A. Auto-adjusting headband
B. Leatherette ear cushions
C. Flip microphone
D. Charging port
E. Power button
F. Status indicator
G. Volume control
H. USB wireless transceiver
I. Charging cable

FOR GAMERS. BY GAMERS.™ 4
SETTING UP YOUR RAZER NARI ESSENTIAL
CHARGING YOUR HEADSET
Connect your Razer Nari Essential to a powered USB port using the charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted unit
will fully charge in about 4 hours.
UNDERSTANDING THE CHARGING NOTIFICATIONS
Your Razer Nari Essential will send out notifications depending on its current charging status, as
shown here:
STATUS INDICATOR SOUND INDICATOR DESCRIPTION
Static red None
Charging/low
battery
Static green None
Fully charged/full
battery
Blinking red Warning tone
Battery is critically
low

FOR GAMERS. BY GAMERS.™ 5
CONNECTING TO YOUR PC
1. Plug the USB wireless transceiver to your PC.
2. Right-click on the sound icon on the system tray, and then select Sounds.
3. On the Playback tab, select Razer Nari Essential from the list, and then set it as the Default
Device.

FOR GAMERS. BY GAMERS.™ 6
4. In the Recording tab, select Razer Nari Essential from the list and click the ‘Set Default’
button.
CONNECTING TO OTHER DEVICES
1. Plug the USB wireless transceiver to your device and make sure your Razer Nari Essential is
the default input and output audio device.
CONNECTING TO YOUR HEADSET
1. Power on your headset by holding the power button for at least 3 seconds or until you hear
2 short beeps.

FOR GAMERS. BY GAMERS.™ 7
2. Wait until the status indicator is static blue.
NOTIFICATION STATUS
Blinking
Pairing
Rapid blinking
Connecting
Static
Connected
Note: Keep your headset within close
proximity of the USB wireless
transceiver for a faster and more
stable connection. If your headset fails
to connect, it will automatically power
off after a few minutes.

FOR GAMERS. BY GAMERS.™ 8
USING YOUR RAZER NARI ESSENTIAL
USING THE VOLUME CONTROL
Rotate the volume control to increase or decrease the volume.
USING THE FLIP MICROPHONE
To enable the mic, pull it down until you feel a click an push it up until you feel the same click to
disable the mic.

FOR GAMERS. BY GAMERS.™ 9
Bend the mic until it is parallel to your mouth, then adjust the length as preferred. Make sure the
mic diaphragm is in front and the air vent is facing away from your mouth.
EXTENDING YOUR HEADSET’S LIFESPAN
We recommend stretching the headset gently apart before placing them over your head to
minimize headband stress. However, please avoid overstretching the headset beyond its technical
limits.