Instructions for use
Before riding the electric kick-scooter for the first time, the battery must be fully charged.
Follow the instructions on this user manual to avoid technical problems.
Try to recharge after each ride, which can greatly extend the service life of the battery.
First put the electric kick-scooter on a flat surface.
The electric kick-scooter is developed for flat grounds. Take care of uneven and bumpy grounds.
Press the power button on the display, to turn-on the display and the unit.
Verify the level of the battery power on the display.
Select the desired gear.
Put one foot on the pedal. Stand on the pedal with one leg only. Keep the two hands on the handlebar.
This E-scooter has a “kick-and-go” (aka “kick-start) function for your safety.
Just push with the foot your E-scooter forward and the motor will be activated when you reach 3km/h.
Gently press the lever on the right handle: the device will accelerate.
Step on with the other foot whilst the electric kick-scooter is moving.
Release the acceleration lever to slow-down.
Pull the brake lever on the left handle: the electric kick-scooter will brake.
Stop the electric kick-scooter and remove the feet, one by one.
Turn off the display.
Use the easel to keep the electric kick-scooter standing alone, when not in use.
Distance
The maximum range of the scooter is approx. 10 to 25 km.
This maximum range is affected by the road type (flat and smooth ground will increase the distance, otherwise the distance
will be reduced), ambient temperature, maintenance (tyres, battery, driving modes (ECO / Normal / Speed) and weight of driver.