Warranty Info:
Warnings:
!
Charging Instructions:
Specifications:
This product includes a 90 day warranty against factory defects. Warranty starts at date of purchase and the original product re-
ceipt is necessary for all warranty claims. This warranty does not cover improper use or any use other than specified as proper
use in this manual.
1. Plug the charger into an AC power supply (100-240V)
2. Once connected to a power supply, all the LED lights will turn green.
3. Plug in a 2S or 3S LiPo battery, that has been unplugged and removed from the RC vehicle, into the corresponding balance
3. Plug in a 2S or 3S LiPo battery, that has been unplugged and removed from the RC vehicle, into the corresponding balance
port. 2S for 2S battery packs & 3S for 3S battery Packs. NOTE: LiPo batteries have 2 plugs on them, 1x main plug (large
plug used to plug into the RC car) & 1x balance plug (small white plug used for charging). ENSURE THE LARGE MAIN
PLUG IS DISCONNECTED FROM THE VEHICLE AND ISN’T PLUGGED INTO ANYTHING WHILE CHARGING THE BAT-
TERY WITH THE HX-A3 CHARGER!
4. LED lights will turn red. This means the battery is charging.
5. LED lights turn green when the corresponding battery cells are fully charged. When all LEDs are green, the battery pack is
completely charged.
6. Unplug the battery pack from the charger.
7. Unplug the charger from the power supply.
• AC input : 100-240V
• Charges LiPo batteries: 2S - 3S
• Charge current: 900mAh x 3
• Two output ports: 1x2S, 1x3S LiPo Balance ports
3S Balance Port
2S Balance Port
LEDs
Power Input