Redmond RJ-916 User manual

Slow Juicer
RJ-916
User manual

Manufacturer: “Power Point Inc Limited” №1202 Hai Yun Ge (В1) Lin Hai Shan Zhuang
Xiameilin Futian Shenzhen. China. 518049. Under license of REDMOND®
Изготовитель: «Пауэр Пойнт Инк. Лимитед» №1202 Хай Юн Гэ (B1) Лин Хай Шан
Чжуан Сямейлин Футьян, Шеньжень, Китай, 518049. По лицензии REDMOND®
Виробник: «Пауер Поінт Інк. Лімітед» № 1202 Хай Юн Ге (B1) Лін Хай Шан Чжуан
Сямейлін Футьян, Шеньжень, Китай, 518049. За ліцензією REDMOND®
Importer (EU): SIA “SPILVA TRADING” Address: Jelgava, Meiju cels 43 — 62, LV-3007
Reg. Nr. 43603078598. BA Uvoznik i distributer za Bosnu i Hercegovinu: ASBIS d.o.o.,
Džemala Bijedića 162, 71 000, Sarajevo, Bosna i Hercegovina. Tel: [phone],
e-mail: [email protected], www.asbis.ba. BG Вносител: АСБИС България ЕООД
И.Н.: BG121655056 Адрес: София, бул. Искърско шосе 7, ТЦ Европа, сгр. 3. Тел.:
02/4284111, www.asbis.bg. CZ Dovozce: ASBIS CZ spol. s r.o Obchodní 103, 251 01
Čestlice, Praha — východ, Praha, Czech Republic. Tel: [phone], www.asbis.
cz. HU Importőr: ASBIS Magyarország Kft., H-1135, Budapest, Reitter Ferenc utca 46-
48. Tel.: [phone], Fax: [phone], www.asbis.hu. PL ASBIS POLAND SP
Z O.O., Ul. Krasnowolska 17 A, 02-849, Warszawa. Tel [phone], www.asbis.pl.
RO Importator: ASBIS Romania SRL, Splaiul Independentei 319, SEMA PARC, Obiectiv
5, Etaj 2, Sector 6, Bucuresti, 062650, Romania. Tel. [phone], www.asbis.ro.
RU Импортер в России: ООО «ИЛОТ», 198099, г. Санкт-Петербург, ул. Промышлен-
ная., д. 38, к. 2, лит. А, тел.: [phone]. SK Importér/distribútor pre SR: ASBIS
SK spol. s r.o., Tuhovská 33, 831 06, Bratislava. Tel: [phone], www.online.
asbis.sk. RS Uvoznik i servis za Republiku Srbiju: ASBIS d.o.o., Cara Dušana 205A,
11080 Zemun, Beograd. Tel: [phone], www.asbis.rs. LV Izplatītājs: SIA
„ASBIS BALTICS”; Latvia, Riga, Bauskas iela 58A-15, LV-1004; Tel.: [phone], e-
mail: [email protected], www.asbis.lv. UA Імпортер в Україні: ТОВ ПІІ «АСБІС-УКРАЇНА»,
03061, м. Київ, вул. Газова, будинок 30. Тел. [phone], www.asbis.ua. SL
Distributer, dajalec garancije in servis za Slovenijo, Asbis d.o.o., Brodišče 15, 1236
Trzin; Tel: + 386 (0) 590 79 927; e-mail: inf[email protected]; www.asbis.si. HR ASBISc-
CR d.o.o.; Slavonska avenija, 24/6 -1 kat; 10000, Zagreb, Croatia; Tel: + 385 1 600
9900, e-mail: [email protected]; www.asbis.hr. EE Maaletooja: SIA „ASBIS BALTICS”;
Türi 10c, 11313, Tallinn, Estonia; Tel.: + 372 66047815, e-mail: [email protected]e; www.
asbis.ee. LT Importuotojas: SIA „ASBIS BALTICS”; Ateities g. 25B, 06326, Vilnius, Li-
etuva; Tel.: [phone], e-mail: [email protected]; www.asbis.lt. CY Importer Cy-
prus: ASBIS Kypros Limited; 26, Spyrou Kyprianou Str, 4040, Germasogeia, Limassol,
Cyprus. Tel: [phone]; Fax: [phone], e-mail: [email protected];
www.asbis.com.cy
CONTENTS
IMPORTANT SAFEGUARDS ............................................................. 5
Technical specications ...........................................................................7
Delivery set .................................................................................................7
Parts list ........................................................................................................7
I. PRIOR TO THE FIRST USE ...........................................................7
II. OPERATION ...................................................................................... 8
Assembly ..................................................................................................... 8
Operation .................................................................................................... 8
Protection system ..................................................................................... 9
III. CLEANING AND MAINTENANCE ......................................... 9
Storage and transportation .................................................................10
IV. BEFORE CONTACTING SERVICE CENTER .....................10

3
A1
1
2
3
4
5
6
7
8
10
9
0
II
I

4
A2
0
II
I
1
2
3
4 6
5
b
a
b
a
0
II
I
a
b
b
c
c
d
0
II
I
a
e
d
f

RJ-916
5
RUS
Read the user manual carefully and keep it as a reference book.
Proper use of the appliance will signicantly prolong its life.
The safetymeasures and instructions contained in this manual do
not cover all possible situations that mayarise during the opera-
tion of the appliance.When operating the device the user should
be guided by common sense, be cautious and attentive.
IMPORTANT SAFEGUARDS
• The manufacturer is not responsible for any failures
arising from the use of this product in a manner
inconsistent with the technical or safety standards.
• This appliance is intended to be used for nonin-
dustrial use in house hold and similar spheres of
application. Industrial application or any other
misuse will be regarded as violation of proper
service conditions. Should this happen, manufac-
turer is not responsible for possible consequences.
• Before installing the appliance, check that the device
voltage corresponds with the supply voltage in your
home (refer to rating plate or technical data).
• While using the extension cord, make sure that its
voltage is the same as specied on the device. Using
different voltage may result in a re or other acci-
dent, causing appliance damage or short circuit.
• Always unplug the device after use, before clean-
ing or moving. Never handle the plug with wet
hands. Do not pull the power cord to disconnect
from the outlet; instead, grasp the plug and pull
to disconnect.
• Keep the power cord away from hot surfaces (gas or
electric ovens) or sharp edges. Do not let the cord
hang over the edge of a table or a counter.
REMEMBER: damaging the cord may lead to
a failure that will not be covered by the
warranty. If the cable is damaged or requires
replacement, contact an authorized service
centre only to avoid all risks.
• Never place the device on soft surfaces.
• Do not use the juicer disassembled. The juicer lid must
be securely fastened with clamps. Otherwise, the juicer
will not work.

6
• Do not put too much food into the feeding tube.
Do not apply excessive force. The juicer has
overload protection system.
Do not push food into the feeding tube port
with ngers or foreign objects as this can cause
injuries or breakdown. Use pusher that come
with the appliance. Do not touch the blades
located on the lter mesh. They are very sharp!
• Before cleaning the appliance ensure that it is
unplugged and has cooled down, rotation has
stopped. Keep the device clean. Follow the
instructions carefully.
DO NOT immerse the device in water or wash
itunder running water!
• This appliance can be used by children aged from
8years and above and persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Keep the appliance and its cord out of reach of
children aged less than 8years. Cleaning and user
maintenance shall not be made by children without
supervision.
• Keep the packaging (lm, foam plastic and other)
out of reach of children as they may choke on them.
• No modications or adjustments to the product are
allowed. All the repairs should be carried out by an
authorized service center. Failure to do so may result
in device and property damage or injury.
CAUTION! Do not use the appliance in case
of any malfunctions.

RJ-916
7
RUS
Technical specications
Model................................................................................................RJ-916
Type. ..........................................................................................centrifugal
Rated power ....................................................................................400 W
Max. power .......................................................................................750 W
Voltage .................................................................220–240 V, 50/60 Hz
Electric safety .................................................................................class II
Number of available speeds ................................................................ 2
Speed I ................................................................................... 15,500 rpm
Speed II .................................................................................. 19,000 rpm
Noise level ..................................................................................... <78 dB
Suction leg ................................................................................. available
Waste container volume ................................................................. 2.2 l
Separator with stainless steel mesh .................................. available
Diameter of the opening for products loading ................... 74 mm
Protection mechanism to prevent switching
the device if incorrectly assembled .................................... available
Overheat protection ................................................................ available
Housing material .......................................................................... plastic
Overall dimensions ..........................................345 × 390 × 175 mm
Net weight ....................................................................................... 2.7 kg
Power cord lenght ..............................................................................1 m
Delivery set
Juicer .....................................................................................................1 pc.
Plunger.................................................................................................1 pc.
Waste container .................................................................................1 pc.
User manual ....................................................................................... 1 pc.
Service book .......................................................................................1 pc.
The manufacturer has the right to make changes in the design,
conguration or package, as well as in the technical charac-
teristics of the product in the course of continuous improvement
of its products without further notice of these changes. The
specications allow the error of ±10%.
Parts list (scheme A1, p. 3)
1. Plunger
2. Lid with an food supply chamber
3. Separator
4. Processing chamber
5. Juice pouring spout
6. Waste container
7. Lid clamps
8. Juicer base with the motor
9. Speed switch
10. Power cord
I. PRIOR TO THE FIRST USE
Carefully take out the appliance and its components from the box.
Remove all the packaging materials and promotional stickers.
Be sure to keep in place warning labels,index stickers (if any) and
a label with the serial number of the appliance on its body!
After the transportation or storage at low temperatures, it is
necessary to keep the appliance at the room temperature for at
least 2 hours before switching on.

8
Completely unwind the power cord. Wipe the housing with a
moist cloth. Rinse removable parts with warm soapy water and
dry thoroughly before connecting the appliance to an electrical
outlet.
I I. OPERATION
Assembly (scheme A2, p. 4)
1. Place the juicer base on a at, hard, horizontal surface. Make
sure that the appliance is unplugged from the mains and the
speed switch is in position 0.
2. Place the waste container on the base.
3. Place the processing chamber on the base so that the edge of
the waste container is secured in the special tab of the
processing chamber.
4. Place the separator into the center of the processing chamber
on the drive shaft coupling. Press on the upper rim of the
separator from both sides so that it lowers onto the coupling
until it stops. Make sure the separator is secured to the shaft
evenly and rmly. Do not apply excessive force!
5. Place the lid with the food supply chamber on the processing
chamber. Install the juice pouring spout.
6. Raise the clamps, latch them onto the plastic tabs on the lid,
and snap them into place by applying slight pressure to their
bottom.
CAUTION! The lid clamps must be fully latched and tightly secured
to the tabs on the lid.
Operation
CAUTION! The recommended time for juicer continuous operation
at maximum speed when processing solid products should not
exceed 1 minute with a break of at least 3 minutes. The appliance
may only be operated fully assembled.
1. Wash fruits and vegetables before juicing, cut into pieces the
largest ones that do not t into the food supply chamber.
When juicing plums, peaches and other fruits with large pits,
remove the pits rst to avoid damaging the separator. Remove
thick or tough skin from fruit (kiwi, mango, etc.) before juicing.
2. Place the juicer on a at, hard, horizontal surface. Make sure
that the juicer is properly assembled (see the “Assembly”
section), the appliance is unplugged, the speed selector is in
position 0, the food supply chamber is empty.
3. Place a container under the juice pouring spout.
4. Connect the juicer to the mains.
5. Move the speed selector to position I. The motor starts
running. Use this speed setting for juicing berries, soft fruits
and vegetables.
6. To extract juice from hard fruits and vegetables, move the
speed selector to position II.
Do not turn the speed selector further than the limit positions to
avoid mechanical damage!
7. Load prepared fruits and vegetables into the food supply
chamber. Use the plunger to push them through.
CAUTION! Load products into the juicer only while the motor is
running.

RJ-916
9
RUS
Do not use hands or foreign objects to push the products. Do not
put foreign objects into the food supply chamber.
Do not press too hard on the plunger. This may affect the quality
of the juice and lead to the separator malfunction or damage
components of the appliance.
8. If the waste container becomes full during operation, it must
be emptied. To do this, turn off the appliance by moving the
speed selector to position 0 and disconnecting the appliance
from the mains. Follow the instructions in the “Cleaning and
Maintenance” Section.
9. When you nish, turn off the juicer by moving the speed
selector to position 0 and unplug it from the mains.
To increase the appliance efciency, it is recommended to make
short breaks to clean the separator. Rinse the separator after
processing 1.5–2 kg of food. When processing berries (e.g. grapes,
currants, gooseberries), the separator becomes clogged faster than
usual. Pressing juice from these products may require more
frequent cleaning of the juicer and separator.
Soft apple varieties, as well as overripe apples, are not intended
for juice production. When pressing ones, a large amount of waste
is generated that clogs the tray of the processing chamber.
Disruption occurs while the juicer is running; pulp should be
cleaned from the processing chamber more often.
MANUFACTURER’S WARNING!
To improve the productivity and prolong service life it is
recommended:
• To cut rm products, as carrots, beets, radish, apples, pears,
pineapple into 4–5 cm wedges;
• To gradually put the precut vegetables, fruit or berries into
the feed chute and slightly press;
• Not to press the push bar too much to avoid quality
degradation of juice and the auger rotation stopping;
• To remove stones from fruit and berries to avoid auger and
lter breakage;
• To preliminarily defrost food.
CAUTION! This device IS NOT AIMED at squeezing the juice from
beans, nuts, fruit/vegetable stones, frozen foods!
Protection system
• The appliance is equipped with activation protection against
incorrect assembly. If the separator bowl or the appliance lid
is not installed or installed incorrectly, the appliance will not
switch on.
• The appliance is equipped with a motor overheat protection
system. If the temperature is too high, power will be switched
off automatically. In this case, turn off the juicer by setting
the speed switch to position 0 and disconnecting the
appliance from the mains. The motor will have cooled down
after 20–30 minutes and you may continue using the
appliance, but with shorter periods of continuous use and
increasing the intervals between use.
III. CLEANING AND MAINTENANCE
The juicer must be cleaned after each use. See diagram A2, page
4 for disassembly procedure.

10
1. Turn off the juicer. Make sure it is disconnected from the mains
and the speed switch is in position 0.
2. Pull the lower part of the clamps and remove them from the
lid. Remove the lid.
3. Take away the separator by gently pulling it up on the edges.
Do not apply excessive force. Soak the separator in water and
detergent for 10 minutes, then rinse it.
4. Remove the processing chamber and the waste container.
Wash them with the plunger and the lid, using non-abrasive
detergents.
DO NOT immerse the housing and power cord into water or rinse
it under running water.
DO NOT use coarse tissues or sponges, abrasive pastes for cleaning.
It is also not recommended to use any chemically aggressive or
other substances, not recommended for use with items which
contact with food.
Add some lemon juice to clean and shine metal parts.
5. Wipe the housing of the appliance with a damp cloth.
Storage and transportation
Before repeated operation or storage completely dry all parts of
the appliance. Store the assembled appliance in a dry, ventilated
place away from heating appliances and direct sunlight.
During transportation and storage, do not expose the device to
mechanical stress, that may lead to damage of the device and/or
violation of the package integrity.
Keep the device package away from water and other liquids.
I V. BEFORE CONTACTING SERVICE
CENTER
Problem Possible cause Solution
Appliance won’t switch
on
Appliance is not plugged in Plug in the appliance
Electrical socket is not
powered
Connect the appliance to a
properly working electrical
socket
Clamps are not closed After turning off the appliance,
close the clamps
Motor stops while
operating
Overheating protection
tripped
Follow the instructions in the
“Protection system” section
Waste is accumulated in the
processing chamber due to
excessive rotation speed
Clean the processing chamber,
reduce the rotation speed
Waste is accumulated in
the processing chamber
due to excessive pressure
on the plunger
Clean the processing chamber;
do not overload the food supply
chamber with products; reduce
the force when pressing the
plunger.
Pulp is accumulated on
the separator mesh or
gets into the waste con-
tainer with a lot of juice.
Separator is clogged
Clean the separator (see
“Cleaning and Maintenance”
section)
Juice gets out under too
much pressure or leaks
out of the lid
The rotation speed you
have selected is too high Reduce the rotation speed
You apply excessive force
when using the plunger
Reduce the force when using
the plunger
Strong vibration of the
appliance during opera-
tion
Separator is damaged Check the separator for cracks or other damage; if any, contact
the service center

RJ-916
11
RUS
In case you didn’t manage to eliminate the defects, please, refer
to the authorized service centre.
Environmentally friendly disposal (WEEE)
The packaging, user manual and the device itself shall
be taken to the applicable collection point for the recy-
cling of electrical and electronic equipment. Do not throw
away the electronic waste to help protect the environment.
Old appliances must not be disposed with other household waste
but must be collected separately. Municipal disposal of recyclable
wastes is free of charge. The owners of old appliances are required
to bring it to a waste facility centre. With this little extra effort,
you can help to ensure that valuable raw materials are recycled
and pollutants are treated as appropriate.
This appliance is labelled in accordance with European Directive
2012/19/EU – concerning used electrical and electronic appli-
ances (waste electrical and electronic equipment WEEE).
The guideline determines the framework for the return and recy-
cling of used appliances as applicable throughout the EU.

www.redmond.company
www.multivarka.pro
www.store.redmond.company
www.smartredmond.com
Made in China
RJ-916-ENG-UM-1