REED R6010 User manual

reedinstruments
www com
Pinless
Moisture Meter
Instruction
Manual
INSTRUMENTS
INSTRUMENTS
Model R6010
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
2
INSTRUMENTS
INSTRUMENTS
Table of Contents
Features......................................................................................... 3
Specications................................................................................ 3
Instrument Description .................................................................. 4
Display Description ....................................................................... 4
Operating Instructions................................................................... 5
Taking a Measurement................................................................ 5
Alarm Set Mode.......................................................................... 5
Backlighting ................................................................................ 5
Moisture Comparison Table .......................................................... 6
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
3
INSTRUMENTS
INSTRUMENTS
Features
• Non-invasivemeasurements,runsensoroversurfacebeingtested
withoutscratchingorpenetratingthesurface
• Classiesmoisturestatusas:dry,atriskorwet
• Detectsmoisturecontentinvariousbuildingmaterials
• Measurementdepthfrom0.8"(20mm)to1.6"(40mm)
• DataHoldandMin/Maxfunctions
• Useradjustablealarmswithaudibleandvisualindicators
• LargebacklitLCDdisplay
• Lowbatteryindicatorandautoshut-off
Specifications
MeasuringRange: 0to100.0%MoistureContent
DepthDetection: 0.8to1.6"(20to40mm)
Resolution: 0.1%
SensorType: Pinless
Display LCDDisplay
BacklitDisplay: Yes
DataHold: Yes
Min: Yes
Max: Yes
AutoShut-off: Yes(30secs)
LowBatteryIndicator: Yes
PowerSupply: 3xAAAbatteries
ProductCertications: CE
OperatingTemperature: 32to104°F(0to40°C)
StorageTemperature: 14to140°F(-10to60°C)
OperatingHumidityRange: 0to85%
Dimensions: 9.5x2.5x1.2"(242x63x30mm)
Weight: 8oz(226g)
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
4
INSTRUMENTS
INSTRUMENTS
Instrument Description
1. MoistureSensor
2. UP/BacklightButton
3. LCDDisplay
4. AlarmSETButton
5. DOWNButton
6. Measure/DataHoldButton
7. PowerButton
8. BatteryCover
Display Description
1. LowBatteryIndicator
2. DataHoldIndicator
3. Current Moisture Value
4. DRYIndicator
5. RISKIndicator
6. WETIndicator
7. MAXIndicator
8. MAXMoistureValue
9. MINIndicator
10.MINMoistureValue
12
3
7
8
4
5
6
9
10
1
3
2
7
8
4
5
6
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
5
INSTRUMENTS
INSTRUMENTS
Operating Instructions
Taking a Measurement
TurnthemeterONbypressingthe button.Holdthemeterinaupright
positionsotheballsensorisintheairandatleast8to10cmawayfrom
anyobject.PresstheMEASbuttonand“CAL"willdisplayontheLCD
screenwhiletheunitselfcalibrates.Thevaluemustbebelow0.5tobe
abletotakeaccuratemeasurements.Ifthereadingisabove0.5youmust
turnthemeteroffandmovetoadryareatocalibrate.Afterthemeteris
calibrateditwillautomaticallystarttotakemeasurements.Toholdthe
current measurement press the MEASbuttonandthedataholdsymbol
willappearontheLCDscreen.After30secondsofinactivitythemeterwill
autopoweroff.
Note: Whenyoumovefromthelocationofyourinitialcalibrationyou
mustre-calibratethemeter.
Alarm Set Mode
TochangetheRISKandWETalarmvalue,turnonandcalibratethemeter.
PresstheMEASbuttontoputthemeterindataholdandpresstheSET
button.TheRISKsymbolwillappearontheLCDscreenandthevalue
whichtheRISKalarmissetto.Tochangethealarmvalue,presstheUP
or DOWNbuttons.PresstheSETbuttontosaveyoursettingandto
changetheWETalarmvalue.TheWETsymbolwillappearonthescreen
besidetheWETalarmvalue.TochangetheWETalarmvalue,pressthe
UP or DOWNbuttons.PresstheSETbuttontosavetheWETalarmvalue
andtoreturntodataholdmode.Ifthemoisturemeasurementexceeds
theRISKalarmsetting,themeterwillbeepeverysecond.Ifthemoisture
measurementexceedstheWETalarmsetting,themeterwillbeepevery
halfsecond.
Notes
• TheRISKalarmvalueisbetween0-50.Thedefaultsettingis30.
• TheWETalarmvalueisbetween50-100.Thedefaultsettingis60.
Backlighting
Whenthemeterisindatahold,presstheUPbuttontoturnthebacklighting
onoroff.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

reedinstruments
www com
6
INSTRUMENTS
INSTRUMENTS
Moisture Comparison Table
Construction Material Display (Unit) Moisture Status
Gypsum
<30 DRY
30-60 RISK
>60 WET
Cement
<25 DRY
25-50 RISK
>50 WET
Wood
<50 DRY
50-80 RISK
>80 WET
Notes
• Themoisturesensorballheadmustbekeptperpendiculartothe
materialbeingmeasured,pressedrmlyonthesurfaceandnotslanted.
• Ifthethicknessofthematerialbeingmeasuredislessthan20mmthe
readingmaynotbeaccurateduetoconictingvalues.
• If"BAT"appearsontheLCDscreen,thebatteriesshouldbereplaced
immediately.
ForserviceorinformationonthisoranyotherREEDproduct,contact
REEDInstrumentsat[e-mail].
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]