Operating Instructions
Press the POWERbuttontoturnthemeteron.“CAP-”willauto-appear
ontheLCDdisplay.After“CAL-”appears,themeterautomaticallyadjusts
tozero.Whenautomaticzeroadjustmentiscompleted,“CAL-”
disappearsand“0.0”willappear,conrmingthecapcanberemovedto
start measuring. Press the POWERbuttonagaintoturnoffthemeter,and
coverthelightsensorwiththeprotectivecap.
Note:If“ERR1”appears,checktheprotectivecaptoinsureitis
properly secured.
Protective Cap
This is used to protect the light
sensor from damage and creates a
completedarkenvironmentforthe
metertoself-calibrateonstart-up.
Adjustable Probe
Dependingontheapplication,thelight
probecanbeadjustedorremoved
from the meter.
Power Button
Pushthisbuttontoturnonthemeter.
Pushandholdthisbuttonfor3
seconds to turn the meter off. The unit
willautomaticallyturnitselfoffafter
30minutesofinactivity.Todisablethe
automaticpowerofffunction,turnthe
meteroff,pushandholdthe“ ”
button,thenpushthePOWER button
toturnthemeteron.The“ ”will
disappearfromtheLCDconrming
this setting.
continued ...
1.888.610.7664info@REED-Direct.com REED-Direct.com