Reflecta x11-Scan User manual

-0-
x11-Scan
User’s Manual

-1-
Table of Contents
1. Precaution.................................................................2
2. Preparation................................................................3
Standard Accessories..............................................3
Part Names.............................................................4
3. Start Using Your Digital Film Scanner..........................6
Settings for Film Scanning……………………............9
Image Resolution……………………………….........11
4. Placing holder into the scanner…..……………………14
5. Image Brightness and Color Adjustment...................13
6. Playback and Delete Mode........................................13
7. Preview and review images on a TV screen……….…16
8. Downloading the images from Card to Computer…...17
9. Appendix……………………………………………….19
Specifications……………………………………........19
Icon & Indicators………………………………………20
EN

-2-
Welcome
Thank you for purchasing x11-Scan.
Please take a moment to read through this manual.
1. Precaution
Before using x11-Scan, please ensure that you read and
understand the safety precautions described below.
Always ensure that the x11-Scan is operated correctly.
Do not try to open the case of the scanner or attempt to
modify it in any way. Maintenance and repairs should be
performed only by authorized service providers.
Keep the x11-Scan away from water and other liquids. Do
not use it with wet hands.
Keep the scanner and its accessories out of the reach of
children and animals to prevent accidents or damage.
Use only the recommended power accessories. Use of
power sources not expressly recommended for x11-Scan
may lead to overheating, distortion of the equipment, fire,
electrical shock or other hazards.
If the exterior of x11-Scan needs cleaning, wipe it with a
soft, dry cloth.
EN

-3-
2. Preparation
Standard Accessories
Digital Film Scanner User’s Manual
135 holder for negatives
135 holder for slides Power adapter
Cleaning brush USB cable
EN

-4-
Part Names
EN
EN

-5-
Holder for type 126 negatives (optional accessory, item # 64374)
Holder for type 110 negatives (optional accessory, item # 64373)
Note: We suggest using bundled brush to insert into the
scanner’s slot and clean the glass surface periodically to
produce a clear image.
Please make sure your film negatives / mounted slides and
cover trays are clean before inserting into the scanner as well.
Dust or dirt will affect the quality of your scanned images.

-6-
3. Start Using Your x11-Scan
1. Insert the SD Card into the Scanner.
Insert the SD card into the SD Card Slot located at the
back of the scanner. Make sure that the golden print
on the card is facing downward. The card will be
locked automatically if it is inserted properly.
Note:
Only accept SD and SDHC card (Maximum 32GB).
Card with SDXC class is not compatible.
2. Connect the electric power to your Scanner.
Connect the Type-C USB cable terminal to the
Type-C USB Connector of the Scanner.
Connect the other larger USB terminal to the Power
Adaptor or the USB port of your computer, any of both
devices will supply the power needed by the scanner.
EN

-7-
Press the Power Button of your scanner to turn on the
electric power. You will see a pop up screen of Home
Page on the LCD, select the item you want to operate.
There are 4 items (icons) for selection.
Note: The Home Page and the Button
The Home Page is an important page for the operation of
the scanner. From the Home Page you can go to the
preview mode of the scanner for scanning film directly by
pressing the Button once again, after all the settings
for the film are made. You may frequently use the
Button in the operations of the scanner later on.
Film icon USB Trident Photo Gallery Calendar
EN

-8-
The Film icon:
This is the main function of the scanner, a function for you
to make all the settings for scanning film. For example the
setting of type and size of film, a selection for scanning
50x50mm transparent slide, or negative film for 135, 110
and 126 films. For more detail please see page 11:
( Operation of the Scanner :
Settings for scanning: )
The USB Trident icon:
For downloading the image files from the SD Card to the
computer. For more detail please see page 20:
(Downloading the images from Card to Computer)
The Photo Gallery icon:
For you to review the scanned images from the card on
LCD screen. You may use it as a mini electronic Photo
Frame on your desk.
For more detail, please see description on page 17:
(Playback and Delete mode)
The Calendar icon:
For you to set the date and time you prefer to be shown in
your image files. For more detail please see page 21:
(The Date and Time setting:)
EN

-9-
Operation of the scanner :
Settings for scanning:
On the home page of the LCD Screen, select the Film
icon (preset) by pressing / button, then OK/( )
button to confirm your selection.
You will then move to the 2nd. page of selections for
you to select the type of film:
Slide Color Negative B&W Negative
Select the type of film you want to scan by pressing
/ Button, then OK/( )Button to confirm your
selection.
You will then move to the 3rd. page of selections for
you to select the size of film, they are:
135 Film 110 Film 126 Film
135 Film: film with 24x36mm picture area
110 Film: film with 13x17mm picture area
126 Film: film with 28x28mm picture area.
EN

-10-
Select the size of film you want to scan by pressing
/ button, then OK/( ) Button to confirm your
selection.
A preview screen will pop up on the LCD screen, you
may now insert the film holder into the scanner and
photo of the film will be shown on the LCD screen,
ready for you to convert the photos into digital images
and store them in the SD Card.
Quick guide to Preview Mode for scanning film:
In any condition press the Button will return to the
Home Page of the scanner. Press one more time from the
LCD screen Home page will at once direct you to the
preview mode for scanning film. Press once again will
return to the Home Page.
Preview Screen:
EN

-11-
Image Resolution:
There are 2 resolutions of scanning and storing your
image in the SD Card, 14 megapixels and 22 megapixels
(by interpolation).
The resolution is set by pressing the ( ) button on the
Preview mode. The set value is shown on the lower right
hand side of the preview screen.
EN

-12-
4. Place Slide / Film Holder Into the Scanner
The scanner supports 50x50mm mounted slides with
a thickness of up to 3.2 mm, color negative and B&W
negative films of type 135, 110 and 126.
Insert your slides into the slide holder or your negative
strips into the negative holder.
Make sure the shiny side of the film is facing upward.
Now insert the holder into the slot of the scanner from the
right side. When moving on, the holder will snap into place
with each image.
You may fine adjust the film’s position by referring the
image shown on the display.
Press the OK/( ) button to scan the image, the image is
saved into the SD Card automatically.
EN

-13-
5. Image Brightness and Color Adjustment
The brightness and color of the image are preset
automatically. Normally additional adjustment is not
needed. Some film brightness and color fade out and
needs adjustment. Press or Button and you will see
the following icons display on the LCD screen for
adjustment.
Brightness Adjustment
RGB Color Adjustment
Press Brightness or RGB Button then Playback( )
Button to move to the color you want to adjust. Press the
/ / Button to select the value of adjustment you want
then press the OK/( ) Button to confirm your selection.
The adjusting icons will disappear then press the OK/( )
Button once more to scan the adjusted picture.
You may select the recover icon( ) to reset the
adjusted colors to its original default setting.
Important Notes:
All your settings for scanning film of your last scanning will
be reset when the power of the scanner is turned off by
the Power Button or unplug from the USB cable.
Your previous film setting is kept when you select the
Brightness( ) or RGB( ) Button again from the
preview mode, if the power of scanner was not turned off.
EN

-14-
6. Playback and Delete mode
Playback:
In scanner Preview mode (Press the Button once
again), you may review the previous captured images by
pressing the (Playback) button then and
button for image selection. Press the OK/( ) button will
allow you to review the selected captured images stored
in the SD card. Press the (Playback) button once again
will set the captured images in a slide show mode. The
images will be slide over with a duration of 5 seconds per
frame. In Slide Show mode pressing the OK/( ) Button
will return to the Home Page of the scanner.
You may also select the Playback Mode from the Home
page of the scanner by selecting the Photo Gallery icon.
The operation of the Photo Gallery mode is the same as
described in the Playback mode.
The scanner with Playback (Photo Gallery) setting is a
good way to use it as a mini photo frame on your
desk.
Important Note:
The scanner’s Photo Gallery mode only accepts the
images scanned by the scanner. For images from other
devices, for example the digital camera or mobile phone,
may or may not be accepted and displayed from the
scanner, due to the different file names or photo format of
the images.
EN

-15-
Deleting Files:
To delete a captured image, under the Playback mode,
select the picture you want to delete by or Button,
press the Delete Button ( )once will allow you to delete
the selected image. Press the Delete Button twice will
allow you to delete all the captured images.
You may select No (not to delete) from the or
Button to leave the Delete Mode.
Formatting SD Card:
If the SD Card (maximum 32GB) you use is not
compatible with the scanner and no scans can be stored
on it, card formatting by computer is required.
Select file system FAT32 to format your card.
Formatting your SD Card will delete all the files in your
card. Please save your files (if any) onto your computer
before card formatting.
EN

-16-
7. Previewing and Reviewing images on a TV screen
Connect your scanner and TV set using an HDMI cable.
Set your TV to the proper HDMI terminal that you are
connecting, turn on the power of the scanner and press
the Home/Preview Button allow you to preview the image
of your film, or select the Galley Icon from the Home Page
then press the OK/( )Button to review your scanned
images on the TV screen.
You may also connect the scanner to TV set via USB
setting, to review the captured images up to a 4K/2K
image quality, depending on the maximum resolution of
your TV set.
For proper USB connection of your TV set please refer to
the instruction manual of your TV set, and treat your USB
and scanner connection like a card reader.
EN

-17-
8. Downloading the images from Card to Computer
Connect the Type-C USB cable to the scanner and your
computer’s USB port. Turn on the power of both your
computer and scanner. From the Home Page of the
scanner (preset), select the USB Trident Icon by
/ / Button then OK/( ) Button to activate the
connection. Use it as a mass storage device or card
reader that is connected to your computer to download
the image files.
Connection success Connection fail
If the connection fails:
Please check the loading of the SD Card, make sure that
it is properly loaded in the Card Slot. Reload the SD Card
and try again.
Try to connect the USB terminal to the other port of your
computer, a defect computer USB port may cause
connection fail.
EN

-18-
The Date and Time setting:
You may set the Date and Time in the image file before
scanning image. The Date and Time set will not be printed
on the picture of the scanned image, it only stored in the
electronic file of the image.
From the Home Page of the scanner, select the Calendar
icon by /Button then OK/( ) Button to confirm
your selection. You will see a date adjustment table as
shown below.
Press the Playback Button( ) to select the item you
want to adjust. Use the / Button to increase or
reduce the number you are going to set, then press the
OK/( ) Button to confirm your selection and leave the
adjustment table back to the Home Page.
The purpose of having Time and Date setting:
Some user want to set the date of the picture back to the
date the photo was taken, if they can remember that
approximate date.
EN

-19-
9. Appendix
Specifications
Image Sensor
1/2.33”14 Mega CMOS Sensor,
Preview and Review
5”all angle IPS LCD Display
Lens Specification
F/No. 3.5, 5 elements lens
Color Balance
Automatic
Exposure Control
Automatic & Manual adjustment
Support Film Size
Auto Cropping
135 Negative & Slide (3:2)
110 Negative & Slide (4:3)
126 Negative & Slide (1:1)
Support Film Type
Auto Converting
50x50mm Slide (135 , 110 &126)
Color Negative Film (135 ,110 &
126)
Black & White Negative Film
Focusing
Fixed Focus
EV adjustment
Yes, + - 2.0 EV
RGB Color adjustment
Yes
PC Interface
USB 2.0
Image Format
135 Negative 3:2 Ratio
110 Negative 4:3 Ratio
126 Negative, 1:1 Ratio
Light Source
White LED Panel
Power Source
From computer USB port,
5V/1A Power adapter
USB Connector
Type-C
TV Connection
HDMI
Dimension
95 (H) x 135 (W) x 125 (D) mm
Specifications are subjected to change without prior notice.
EN