Reflecta x10-Scan User manual

-0-
User’s Manual

-1-
Table of Contents
1. Precaution .................................................................2
2. Preparation................................................................5
Standard Accessories..............................................5
Part Names .............................................................6
3. Start Using Your Digital Film Scanner .......................8
4. Place Slide / Film Into The Holder...........................11
5. Image Brightness and Color Adjustment.................14
6. Playback and Delete Mode .....................................15
7. Watching the images on a TV screen………………16
8. Downloading the images from Card to Computer....17
9. Appendix……………………………………………….18
Specifications……………………………………….18
Icon & Indicators……………………………….….19
System Requirements...........................................20
EN

-2-
Welcome
Thank you for purchasing a reflecta x10-Scan.
Please take a moment to read through this manual.
1. Precaution
Before using the scanner, please ensure that you read
and understand the safety precautions described below.
Always ensure that the scanner is operated correctly.
Never operate the scanner inside of an aircraft or
anywhere else where operation of such devices is
restricted. Improper use creates the risk of serious
accident.
Do not try to open the case x10-Scan or attempt to modify
the device in any way.
High-voltage internal components create the risk of
electric shock when exposed. Maintenance and repairs
should be performed only by authorized service providers.
Keep the scanner away from water and other liquids. Do
not use it with wet hands.
Keep the scanner and its accessories out of the reach of
children and animals to prevent accidents or damage to
the scanner.
If you notice smoke or a strange odor coming from the
device, turn the power off immediately. Take the scanner
EN

-3-
to the nearest authorized service center for repairing.
Never attempt to repair reflecta x10-Scan on your own.
Use only the recommended power accessories. Use of
power sources not expressly recommended for reflecta
x7-Scan may lead to overheating, distortion of the
equipment, fire, electrical shock or other hazards.
The scanner may become slightly warm during use. This
does not indicate malfunction.
If the exterior of the scanner needs cleaning, wipe it with a
soft, dry cloth.

-4-
2. Preparation
Standard Accessories
Digital Film Scanner User’s Manual
135 Negative Holder 135 Slide Holder
110 Negative Holder 126 Negative Holder
(Optional) (Optional)
Clean Brush Adaptor
USB Cable TV Cable
EN

-5-
Part Names
EN

-6-
Note: We suggest using bundled brush to insert into the scanner
slot and clean the glass surface periodically to produce a clear
image. Please make sure your film negatives/ mounted slides
and cover trays are clean before inserting into the scanner as
well. Dust or dirt from the negatives and cover trays will affect
the quality of your scanned images.
EN

-7-
3. Start Using Your Digital Film Scanner
1. Insert the SD Card into the scanner.
Insert the SD card into the SD Card Slot located at the
back of the scanner, make sure that the golden pins
on the card are facing downward. The card will be
locked automatically if it is inserted properly.
Note:
Only accept SD and SDHC card (Maximum 32 GB).
Card with XDHC class is not compatible.
2. Connect the electric power to your scanner.
Connect the micro USB cable terminal to the micro
USB Connector of the scanner. Do not force the
connection if the connector is in the wrong direction,
turn the direction to the opposite side and try again.
EN

-8-
Connect the other larger USB terminal to the power
adaptor or the USB port of your computer, Any of both
devices will supply the power needed by the scanner.
Press the Power Button of your scanner to turn it on. You
will see a pop up screen on the LCD, Select “NO” by
pressing the OK/( ) Button, The film type is preset at
Transparent Slide Film, You may select the setting for
other type of film from the Film Type Button.
EN

-9-
Film Type Icons:
(Shown on Lower Left Corner of LCD)
135 positive (slide)
135 negative
135 black & white
110 negative
126 negative
EN

-10-
4. Place Film / Slide Into The Holder
1 Keep the glossy surface in the upward direction.
Open the negative/ positive slide holder as Illustrated.
1. Put a 135 positive slide/ negative film/ 110
negative/126 negative into holder as shown.
2. Close the holder and please make sure the holder
close properly.
EN

-11-
5. Place Slide / Film Holder Into The Scanner
The Scanner supports 50X50mm transparent slide,
135 B&W, and 135/110/126 negative film.
1. Scanning 50X50mm Transparent (Positive)Slide:
Insert the 135 Slide Holder into the scanner Film/Slide
Holder Slot according to the triangular mark on the
scanner and the holder, as shown in below diagram.
You may keep the slide in position by referring the
image shown in the LCD screen. Press the Film Type
Button to select the proper type of film for scanning.
Press the OK/( ) button to scan image, the image is
saved into the SD Card automatically.
EN

-12-
2. Scanning type 135, 110 and 126 negative films:
Insert the 135 (110/126) negative holder into the
scanner’s holder slot according to the triangular mark
on the scanner and the holder, as shown in below
diagram. Turn on the power of the scanner, select the
type of film to be scanned by pressing the Film Type
Button. You may keep the film image in position by
referring the image shown in the LCD screen. Press
the Film Type Button to select the proper type of film
for scanning. Press the OK/( ) button to scan image,
the image is saved into the SD Card automatically.
Note: 110 and 126 Film Holders are optional parts, not
included in the scope of delivery.
EN

-13-
6. Image Brightness and Color Adjustment
The brightness and color of the image are preset
automatically. Normally additional adjustment is not
needed. Some film brightness and color fade out and
needs adjustment. Press ( ) Button and you will see
the following icons display on the LCD screen for
adjustment.
Press (Playback) Button to select one of the items you
want to adjust then press the OK/( ) Button to confirm
your selection. You may now see a scale on the right hand
side of the LCD screen, Press the ▲and ▼Button to
add or reduce the value of the adjustment. Press OK/( )
Button to confirm your adjustment. Press the OK/( )
Button once more to scan the adjusted picture.
You may select the recover icon ( ) to reset the
adjusted colors to its original default setting.
EN

-14-
7. Playback and Delete mode
You may watch the previous captured images by Pressing
the (Playback) Button then ▲and ▼Button for
image selection. Press the Button twice will set the
captured images in a slide show mode.
To delete a captured image, under the Playback mode,
press the Delete Button ( ) once will allow you to delete
the selected image to delete. Press the delete Button
twice will allow you to delete all the captured images.
Press the Delete Button 3 times will allow you to format
the SD Card. If there is no image in the SD Card you are
not able to enter the Playback/Delete or Format mode.
NOTE:
Formatting your SD Card will delete all the files in your
card. Please save your file (if any) in into your computer
before card formatting.
EN

-15-
8. Watching the images on a TV screen
Connect your scanner and TV set by the TV Cable. Set
your TV to video mode, turn on the power of the scanner
and press the (Playback) Button, select the TV system
of the country you locate, then press the OK/( ) Button
to confirm the system you select. You are now allowing to
watch your image on the TV screen.
You may also connect the scanner to TV set via USB
setting, to watch up to a 4K/2K image quality, depending
on the maximum resolution of your TV set.
For proper USB connection of your TV set please refer to
the instruction manual of your TV set, and treat your USB
and scanner connection as a Card Reader.
EN

-16-
9. Downloading the images from Card to Computer
Connect the Scanner to the computer via the micro USB
cable. Turn on the power of your computer and scanner,
you will see a pop up icon on the Scanner LCD screen as
shown below.
Press the ▲ OR ▼ Button to set the yellow frame to
“YES”, it means you select to link the Card to the
computer, then press the OK/( ) Button to confirm the
linkage. You may download the images from your card to
any folder of the computer.
EN

-17-
10. Appendix
Specifications
Image Sensor
1/2.3”14 Mega CMOS Sensor,
Preview and Review
3.5”Color LCD Display
Lens Specification
F/No. 3.5, 5 elements lens
Color Balance
Automatic
Exposure Control
Automatic & Manual adjustment
Support Film Size
Auto Cropping
135 Negative & Slide (3:2)
110 Negative (4:3) (optional)
126 Negative (1:1) (optional)
Support Film Type
Auto Converting
135 Slide
Color Negative Film (135 ,110 &
126)
Black & White Negative Film
Focusing
Fixed Focus
EV adjustment
Yes, + - 2.0 EV
RGB Color adjustment
Yes
PC Interface
USB 2.0
Image Format
135 Negative 3:2 Ratio
110 Negative 4:3 Ratio
126 Negative, 1:1 Ratio
Light Source
White LED Panel
Power Source
From computer ．USB port,
5V/1A Power adaptor
USB Connector
Micro USB 2.0
TV System
NTSC and PAL
Dimension
101 (H) x 96 (W) x 123 (L) mm
Specifications are subjected to change without prior notice.
EN

-18-
Icons & Indicators
Brightness
Delete
One
Selected Color
Delete All
Default Color
Format
SD Card
Adjusted Value
Yes
135 Slide
No
135 Negative
Film
Card
Error
B/W 135
Negative Film
Card Full
110 Negative
Film
Card
Lock
126 Negative
Film
Playback
Mode
PC-SD-Card
Selection
Slide
Show
PC-SD Card
Link-connected
Wait
TV System Selection
EV Compensation
Available number take in SD card
EN

-19-
PC System Requirements
Pentium®P4 1.6GHz or equivalent AMD Athlon
Free USB2.0 port
512MB RAM
500MB free hard disk space
1024 x 768 pixel color monitor
CD-ROM drive
Windows®XP Service Pack II / Vista™, 32/64 bits
Windows 7/Windows 8 / Windows 10
Mac System Requirements
Power PC G5 or Intel Core Duo processor
recommended
Free USB2.0 port
768MB RAM
500MB free hard disk space
1024 x 768 color monitor
CD-ROM drive
Mac 10.5 and up
This symbol on the product or in the instructions
means that your electrical and electronic equipment
should be disposed at the end of its life separately
from your household waste. There are separate
collection systems for recycling in the EU.
For more information, please contact the local authority
or your retailer where you purchased the product.
EN