Reflecta 64220 User manual

USER'S MANUAL
USER'S MANUAL

User’s Manual
Contents
1: Safety precautions
2: Package contents ……………………………………………2
3: Description of parts ……………………………………………3
4: Loading Slides …………………………………………………4
5: Loading Negatives ……………………………………………5
6: Loading photo …………………………………………………6
7: General operations ……………………………………………9
8: Trouble shooting ………………………………………………26
9: Technical Specifications ………………………………………27
* Illustrations are for instructional purposes only, and may be
different from the actual product.
For correct usage please read these instructions carefully and
keeps in a safe place for future reference!
……………………………………………1

1
1: Safety precautions
Important: Do not expose this product to rain or moisture to
preserve the life of your product.
Caution: Do not disassemble this unit. To prevent the risk of
electric shock, do not remove cover.
Ventilation: The device should be situated so that its location
or position does not interfere with its proper
ventilation. For example, the unit should not be
situated on a bed, sofa, rug or similar surface that
may block the ventilation openings.
Heat: The device should be situated away from sources
of high heat such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol
cotton swab to clean the glass surface periodically
to produce a clear image.
Non use period: The USB cord for the device should be unplugged
from the computer when the unit is left unused for a
long period of time.
USB overloading: Do not overload the USB connections on your
computer. If you have too many devices connected
to your computer such as a wireless mouse,
media player, mobile phone or other USB powered
devices. There may not be enough power for the
film & photo scanner to operate properly.
Servicing: The user should not attempt to service the device
beyond those means described in the operating
instructions. All other servicing should be referred
to qualified person.
Film Holder: The design of the film holder follows ISO standard.
In some cases the holes on the film will not match
exactly to the alignment of the holder. This is
caused by a non-standard camera. In this case
there will be a small black line on the edge of the
frame that can easily be cropped out using photo
editing software.

ISO-- International Organization for Standardization
For environmental protection and energy conservation, besides
in PLAYBACK and USB mode, the device will be powered off
automatically without any operation in 30 minutes of inactivity.
Film & photo scanner•
USB cable•
Negative Film Holder•
Positive Slide Holder•
4 in 1 Photo Tray•
OCR CD•
AC/DC adapter•
User’s Manual•
Please remove the adaptor from the mains when not in use.
2
2: Package contents

3
3: Description of parts
Film and Photo Scanner
Positive Slide Holder
Negative Film Holder
Photo/Name card Holder USB cable

4
4: Loading Slides
Hold up the slide toward the light. Face the
trademark side of the slide away from you.
Look through the slide and it should appear
normally (not a mirror image).
Now turn the slide so the image is upside
down while looking at the same side.
Open the slide holder at the marked spot on
the top.
With the slide holder laid open place the slide
into recessed area in the holder- the slide
should fit perfectly.
Note: Handle slides with care. Any dust
scratches or fingerprints will show up on your
saved images. You’d better to cotton gloves
when handling slides. It is recommended to
use compressed air to remove any dust on
the slides. You can purchase it from an office
supply or electronics retailer.
Close the slide holder and press the edges
so that it locks in place.
Hold it in the position as shown in the film &
photo scanner.
Insert the Slide Holder into the slot on the
right side of the fi lm & photo scanner as
shown.

Hold up the negative toward the light. As you
look through the negative you should be able to
read the small negative numbers normally (not a
mirror image).
Now turn the negative so the image is upside
down while looking at the same side.
Open the negative holder at the marked spot on
the top.
With the negative holder laid open place the
negative into holder so the notches line up with
the notches on the holder.
Note: Handle negatives with care. Any dust,
scratches or fingerprints will show up on your
saved images. If possible use cotton gloves
when handling negatives. It is recommended
to use compressed air to remove any dust on
the negatives. This is not included with the film
& photo scanner but can be purchased from an
office supply or electronics retailer.
Close the negative holder and press the edges
so that it locks in place.
Hold it in the position as shown in the film &
photo scanner.
Insert the negative holder into the slot on the
right side of the film & photo scanner as shown.
Film Holder: The design of the film holder
follows ISO standard. In some cases the holes
on the film will not match exactly to the alignment
of the holder. This is caused by a non-standard
camera. In this case there will be a small black
line on the edge of the frame that can easily be
cropped out using photo editing software.
I S O - - I n t e r n a t i o n a l O r g a n i z a t i o n f o r
Standardization
5
5: Loading Negatives

6
6: Loading photo
Photo tray
Left bracket Right bracket
Position the brackets according to the marked dimensions on the photo
tray.
Note that for 5x7” photographs, the brackets do not need to be fitted
into the photo tray.

Insert the photo into appropriately sized photo tray (5”x7” (5R), 4”x6”
(4R), 3 ½”x5” (3R), name card)
1. Place brackets in photo tray
7
2. Slide brackets downwards
to secure
Place the brackets into the slots and slide the brackets downwards to
secure. Check that they are securely fastened by turning the photo tray
upside down. The brackets should not fall off.

Insert the photo tray into the photo tray slot from the top of the film &
photo scanner as shown.
Note:
• Please use the provided OCR CD to organize the name cards.
• Handle photo with care. Any dust scratches or fingerprints will show
up on your saved images.
• Scanned name cards will capture a standard dimension of 91x55mm.
The scanned image will have a slight border around the name card.
8

9
7: General operations
Note: Maybe there is some difference between the preview image and
saved image, please subject to the image that you saved in SD card.
♦ Quick Start
1. If you want to scan the films, please switch two switches on the top of
the device to the left side. Otherwise if you want to scan the photos,
please switch to the right side.
2. Put Slide/Negative onto the Slide/Negative Holder or insert photo into
appropriately sized photo tray (5”x7” (5R), 4”x6” (4R), 3 ½”x5” (3R),
name card)
3. Insert the Slide/Negative Holder into the slot on the right of the device
or insert photo tray into photo tray slot from the top of the device.
4. Apply the power to the film & photo scanner by two ways:
(1) USB: Connect the film & photo scanner to PC with USB cable
(2) 5V adapter: Connect the adapter to the device with USB cable
5. Press POWER button to turn on the film & photo scanner.
Note: (1) When the Film scanner mode is selected, the Film scan
indication LED is on. (2) When the Photo scanner mode is selected, the
Photo scan indication LED is on.
6. Follow the menu on screen for scanning.
7. After finished the scanning, take out the memory card.
Note: The film & photo scanner has a built-in memory for recording,
when there is a memory card inserted, it will be the top priority for
saving data.
8. Or read pictures from PC by USB mode
9. When capturing in either photo or film modes, please remember to
push both slide switches to the correct placement.
A notification will appear on-screen as a reminder to carry out the
following:
2. Film: push both sliders to the left.
1. Photo: push both sliders to the right

10
① ② ③ ④ ⑤ ⑥
① ② ③ ④ ⑤ ⑥ ⑦
♦
Operation Guide
Home/MODE: Main menu
When the Film scanner mode is selected, the following main menu will
appear.
① Language mode ④ Playback mode
② USB mode ⑤ Film Type
③ Capture mode ⑥ Resolution
When the Photo scanner mode is selected, the following main menu
will appear:
① Language mode
② USB mode
③ Capture mode
④ Playback mode
⑤ Effect: multicolor, B&W
⑥ Crop proportion: (5”x7” (5R), 4”x6” (4R), 3 ½”x5” (3R), name card)
⑦ Resolution

11
Home/MODE: No memory card
If there is no memory card inserted into the device, a warning icon will
be shown on screen when entering the main menu.
1: Capture
After the welcome page, the above menu will appear. User can press
LEFT/RIGHT button for desired menu, then press ENTER button to
confirm the selection.
No memory card indicator
or

1.1 Adjust brightness and color of image
12
You can adjust brightness and color of image in capture mode.
When enter into capture mode, press ENTER button, following picture
will show on:
EV means brightness; R means red; G means green; B means blue.
Press ENTER button to switch, press LEFT/RIGHT button to adjust
data
Press SCAN button back to image preview mode
1.2 Capture: Mirror/Flip(Hard Key)
If any image requires for Mirror or Flip before capture, press LEFT/
RIGHT button for Mirror/Flip function, the live view will be adjusted
accordingly(This step is to correct user misplaced the film/photo either
upside down or flip). Mirror and Flip function can only be used while in
the live view mode.
Mirror
Press LEFT button to change image left to right

1.3 Capture mode
13
Once entered capture mode, there will be an indicator on the left top
corner to indicate it is in live view mode.
User can also press ENTER button, then press LEFT/RIGHT button to
adjust EV value, press ENTER button again to confirm and back to live
view mode.
1.4 Capture: Edit Menu
live view indicator
Selected image
Flip
Press RIGHT button to upside down image

①
14
Save: save captured image
② Cancel: cancel any editing with this image
③ Home: back to main menu
1.5 Live view Capture/Edit menu
Once press SCAN button in live view, the edit menu will appear. When
user press ENTER button, the current image will be saved to internal
memory or memory card when there is a memory card inserted, the
display will return to live view again.
1.6 Capture: Save
Once user press SCAN button, preview (live view) image will be
SCAN
ENTER
Save

selected and shown on the TFT which will take between 1~2 second
15
with 2 icons shown on the left side of the screen. Save icon will be
highlighted for user to confirm by ENTER button, after the above step,
the display will go back to live view mode (preview)
1.7 Capture: Cancel
Select Cancel icon with LEFT/RIGHT button and press ENTER button
to cancel any editing step with present selected image and the display
will return to live view mode (nothing will be saved)
1.8 Capture: Home
Select Home icon with LEFT/RIGHT button, then press ENTER button
or press MODE button on top of the device anytime to return to main
menu
Selected image

1.9 Exit from Edit mode back to Capture mode (live view)
16
Once user press ENTER button for save or cancel option, the display
will return to capture mode/live view. Then user can move the film
holder to next target film or change another photo to capture.
1.10 Memory full
Once the images in internal memory or memory card is full, a memory
full icon will be shown on screen when press SCAN button. User has
to download the images to PC or replace another memory card for
continue capture.
Memory full indicator
2: Playback
or
Press LEFT/RIGHT button to playback mode when power on the device
or access the main menu by Home icon/MODE button anytime. Press
ENTER button to confirm the selection.

2.1 Playback: Auto Slide Show
17
Once user enter playback mode (default to slide show), TFT will auto
display all images stored in internal memory or memory card with 2
seconds interval from previous captured image. User can also stop the
slide show by press ENTER button (Only the images captured by the
film & photo scanner are available in playback mode)
2.2 Playback: Edit Menu
① Rotate +90: captured image rotate +90 degrees
② Rotate –90: captured image rotate –90 degrees
③ Delete: delete this picture stored in internal memory or memory
card
④ Exit: return to Slide show mode
⑤ Save: save the modified image to internal memory or memory card
⑥ Home: return to main menu
Slide show mode
①
②
③
④
⑤
⑥