Regalo HideAway 4010 HD User manual

www.regalo-baby.com
Regalo International, LLC.
3200 Corporate Center Drive, Suite 100 / Burnsville, MN 55306, USA
866.272.5274 (U.S. only) or 952.435.1080
Made in China
HideAway
Bed Rail
OWNER’S MANUAL MODELS: 4010 HD, 5010 HD,
5030 HD,
• READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF BED RAIL.
• KEEP INSTRUCTIONS FOR FUTURE USE.

English2
Before Using Product
Read and follow all instructions carefully to ensure that your product is properly
installed. Failure to follow these instructions for the assembly of use of your bed rail
could result in serious injury or death. The safety of your child is your responsibility.
Please keep these instructions for your reference.
IMPORTANT
• Do not use two separate bed rails on one bed. The bed rails will not function
properly and could be a safety hazard. Should you need coverage on both
sides of the bed, purchase the Regalo Double Sided Bed Rail.
WARNING
• SUFFOCATION AND STRANGULATION HAZARD
• Gaps in and around bed rails have entrapped young children and
killed infants.
• NEVER use with children younger than 2 years old. USE ONLY with
older children who can get in and out of adult bed without help.
NEVER use in place of crib.
• NEVER use unless bed rail is tight against mattress, without gaps,
and at least 9 in. from headboard and footboard. Do not fill gaps
with pillows, blankets, or other items that can suffocate children.
• NEVER use on toddler bed, bunk bed, water bed, or bed with
inflatable mattress. Use ONLY on adult bed.
• Use ONLY on a bed ranging from twin size to queen size.
•Use ONLY on adult bed with box spring and mattress.
• This bed rail is NOT recommended to be used on a platform
or similar style bed.
• This bed rail is intended for use with children 2 years to
5 years of age.
• Discontinue use if damaged, broken, or if parts are missing.
•Do not use if bed rail is not fully assembled.
•Periodically check that all spring pins are fully engaged on bed rail
support bars.

English 3
PLEASE CHECKTO MAKE SUREYOU HAVE THE FOLLOWING PARTS:
A Mesh Wall
B Right Upper Support Bar
C Left Upper Support Bar
D Right Bottom Support Bar
E Left Bottom Support Bar
F Right Guide Arm Assembly
G Left Guide Arm Assembly
Before Assembly
A
B
DC
E
F
G

English4
AssemblingYour Bed Rail
NOTE: Make sure that the spring pins are secured into the opposing holes
so that the bed rail cannot pull apart.
STEP 1
Insert the left upper support bar into the left bottom support bar. Make sure
the spring pin fits securely into the opposing hole so that the two pieces
cannot pull apart. Repeat on the right side of the bed rail.
STEP 2
With the left and right sides of the bed rail assembled, connect the two sides.
SECURED
SPRING
BUTTON
SPRING
PIN

English 5
NOTE: If the zipper does not close securely, make the necessary adjustments
to ensure proper closure. DO NOT use the bed rail without securely zipping the
mesh wall properly.
STEP 3
To install the mesh wall on the bed
rail, slide it over the frame until it
reaches the other end, zip it shut,
then attach the velcro strap over the
zipper to complete the installation.
Pull straps to tighten Latch Closed
Latch Open Swung Down

English6
STEP 4
Lay the frame assembly flat, and align the left guide pins with the guide
track on the left guide arm assembly. Repeat this on the right side.
GUIDE PIN
GUIDE TRACK

English 7
NOTE: When you swing the frame assembly into the upright position, it should
automatically lock into place. If it does not lock in easily, adjust the bars of the
bed rail and try again. Ensure that the locking mechanism is working properly
before use.
STEP 5
Slide the frame assembly along the guide track on each side.
STEP 6
When the frame assembly is at the end of the guide tracks, pivot the frame
assembly into an upright position.

English8
Mounting Your Bed Rail to the Bed
NOTE: The following step may require the help of an additional person.
STEP 1
Remove the mattress from the bed and place the bed rail on top of the box
spring that supports the mattress. The straps and anchors should be extended
opposite the bed rail and mounted to the other side of the box spring.
You may need to release the strap locking buckles located on the
under side of the guide arm assemblies.
NOTE: Ensure that the large end
of the anchor is pointing up. The
anchoring straps should not be
twisted. If twisted, the anchoring
straps will not tighten properly.
Pull straps to tighten Latch Closed
Latch Open Swung Down

English 9
NOTE: The bed rail mesh wall must fit firmly against the side of the mattress.
This requires you to properly tighten the anchoring straps, which can be
difficult. Please follow the next STEP 3 – 4 carefully for the safest installation.
STEP 2
Once the bed rail is properly placed, check to make sure the guide arm
assemblies are parallel to one another. Then, place the mattress on top
of the assembly.
STEP 3
Release the strap locks and pull
the straps towards you, until the
excess slack has been pulled
out from under the mattress. This
tightens the straps and brings the
bed rail into its proper position.

English10
NOTE: When using this bed rail on a foam mattress, with little or no internal
structure, make sure the straps are not over tightened. If the straps are too
tight the mattress will likely fold or buckle in the middle. This will limit the bed
rail's ability to provide your child with the highest level of safety.
Make slight adjustments to find the best level of tightness on your mattress.
The bed rail must be tight, but should not cause the mattress to buckle or fold.
If the straps do not pull through smoothly it may be twisted under the mattress.
Straighten the straps before continuing with the installation.
NOTE: When everything is locked and in place, check to make sure the mesh
wall of the bed rail is firmly up against the side of the mattress. There should
be NO GAPS. Check for twisted straps and retighten the straps as needed.
The excess straps can be tucked under the mattress when the installation
is complete. Do not cut excess strap, may cause strap to fray.
STEP 4
Once the straps are in place
and tightened, close the locking
buckle by giving one final tug
while holding the straps in place.

English 11
Operating the HideAway Feature
STEP 1
Locate the spring locking knobs on each of the hinges. Pull them up towards
the top of the bed rail, releasing the frame structure from it’s upright position.
This will allow the upper part of the bed rail to move freely.
SPRING
LOCKING
KNOBS

English12
STEP 2
With both sides unlocked, pivot
the bed rail mesh wall down,
so that it is parallel with the top
surface of the mattress.
STEP 3
Slide the bed rail mesh
wall along the guide rails
hidden under the mattress.
Continue pushing the bed rail
between the mattress and the
box spring until it is entirely
hidden by the top mattress.
Reverse STEPS 1 – 3
to return the bed rail
to its upright position.
NOTE: Be sure to continue to hold the upper part of the bed rail so that it does
not drop down on its own.
NOTE: Be sure to continue to hold the upper part of the bed rail so that it does
not drop down on its own.

English 13
CARE AND MAINTENANCE
Periodically check the bed rail for signs of damage, wear or for missing
components. Do not use if any part is missing, worn or damaged. Check the bed
rail regularly to make sure all hardware and mountings are tight and secure. Do not
use abrasive cleaners or bleach when cleaning. Proper cleaning of bed rail can be
done by sponging it with warm water and mild detergent.
90 DAYS LIMITED WARRANTY
If, during the first 90 days after consumer purchase of the item, under reasonable
and non-commercial use and conditions of maintenance, it fails while owned by
the original purchaser because of the quality of materials or workmanship of finish
and assembly, Regalo International, LLC, will replace or repair it at Regalo’s option.
PROOF OF PURCHASE REQUIRED.

French 15
Avant d'utiliser le produit
Lire et suivre attentivement les instructions pour assurer une installation conforme
du produit. Négliger les instructions de ce guide de montage et d'utilisation de
la barrière de lit pourrait entraîner de graves blessures ou la mort. Vous êtes
responsable de la sécurité de votre enfant. Conserver ces instructions pour
consultation.
IMPORTANT
• Ne pas utiliser deux barrières de lit séparées sur un lit. Les barrières de lit
ne fonctionneront pas correctement et pourraient être dangereuses. Dans
l'éventualité où il serait nécessaire de couvrir les deux côtés du lit, se procurer
la barrière de lit double de Regalo.
MISE EN GARDE
• DANGER DE SUFFOCATION ET D'ÉTRANGLEMENT
• De jeunes enfants se sont coincés dans l'écart à l'intérieur et
autour des barrières du lit, et des nourrissons en sont morts.
• NE JAMAIS utiliser avec des enfants de moins 2 ans.
UTILISER UNIQUEMENT avec des enfants capables de se
coucher dans un lit pour adulte et d'en sortir seuls, sans aide.
NE JAMAIS utiliser à la place d'un lit de bébé.
• NE JAMAIS utiliser si la barrière de lit n'est pas appuyée
fermement contre le matelas, sans aucun écart, et éloignée
d'au moins 23 cm (9 po) de la tête et du pied de lit. Ne
pas combler l'écart avec des oreillers, des couvertures ou
d'autres articles risquant d'étouffer l'enfant.
• NE JAMAIS utiliser sur un lit pour tout-petit, un lit superposé,
un lit d'eau ou un lit avec un matelas gonflable. Utiliser
UNIQUEMENT sur un lit pour adulte.
• Utiliser UNIQUEMENT sur un lit de dimension lit à une place à
grand lit.
•Utiliser UNIQUEMENT sur un lit d'adulte avec sommier et
matelas.
• L'utilisation de cette barrière de lit est DÉCONSEILLÉE sur un
lit à plate-forme ou de style similaire.
• L'utilisation de cette barrière de lit est réservée à des enfants
de 2 à 5 ans.
• Cesser l’utilisation si la barrière de lit est endommagée,
cassée ou s’il manque des pièces.
•Ne pas utiliser si la barrière de lit n'est pas complètement
assemblée.
•Vérifier périodiquement que toutes les broches de ressort
sont complètement engagées sur les barres de support de
barrière de lit.

www.regalo-baby.com
Regalo International, LLC.
3200 Corporate Center Drive, Suite 100
Burnsville, MN 55306, USA
866.272.5274 (U.S. only) or 952.435.1080
20191105ET