Rehasense ICON 35 User manual

Version 06/21 Page 1 of 23 ICON 35 UM EN
ICON 35
Transport Wheelchair light & compact
User’s manual (EN)
ICON 35Bx AP ICON 35Lx AP
ICON 35Bx SP ICON 35Lx SP
more than mobility

Version 06/21 Page 2 of 23 ICON 35 UM EN
INDEX
1 General information
2 Intended use, indications & Contra-indications
3 Safety Warnings & Recommendations
4 Product’s General Description
5 Label
6 Usage
7 Cleaning & Disinfection
8 Maintenance & Service
9 Transport & Storage
10 Re-use
11 Warranty
12 Technical Data
13 Wheelchair set-up and operation
13.1 ICON 35
13.1.1 ICON 35Bx
13.1.2 ICON 35Lx
13.2 General
13.2.1 Wheels
13.2.2 Brakes
13.2.3 Leg rests
13.2.4 Arm rests
13.2.5 Half foldable back mechanism
14 Accessories
14.1 Ultimate comfort seat & back
14.1.1 Tension adjustment seat straps
14.1.2 Tension adjustment back straps
14.1.3 Overlay seat and back cushion
14.2 Anti-tippers
14.2.1 Anti-tipping device (swing away)
14.2.2 Anti-tipping device (slide up)

Version 06/21 Page 3 of 23 ICON 35 UM EN
1. General information
Dear customer,
Thank you for choosing an ICON 35 wheelchair.
This User manual contains a description of the medical device and important guidelines to ensure a correct and safe
usage of the product. Please read this manual carefully. It is especially important to read the safety requirements and
to follow these.
REHASENSE® continuously develops its products and reserves the right to change specifications and functions of
products without notice.
The ICON 35 wheelchair is not allowed to be used as a vehicle seating option in moving vehicles (like private cars,
buses, trains, metro etc.). For detailed information please refer to the chapter “Transport recommendations”.
By queries please contact your dealer or REHASENSE® directly. The contact data is located on the last page of this
manual.
2. Intended use, indications & Contra-indications
Intended use: The manual wheelchair is a medical device indicated for use by persons with limited motion abilities
who are unable to stand, walk and/or seat independently. It is dedicated for transportation and moving of such people
in sitting position. Users can move with the wheelchair independently (when fitted with larger rear wheels and push
rims) or with a help of an Attendant. The chair can be used indoor and as well as outdoor on different surfaces
(asphalt, concrete, stone and gravel) in good weather conditions. Any other use is prohibited.
Indications: The device is specifically indicated for individuals who (because of the wide variety of possible health
problems) are unable to stand and/or walk and so they need a transportation device to maintain some or all daily
tasks.
Contra-indications: This type of wheelchair must not be used by persons with flaccid paralysis or other diseases that
cause serious body control problems. Such persons require special wheelchairs designed for an extra stable support
of the User body. The need and possibility of usage of an ICON 35 wheelchair should be always estimated as
indicated by a physician or a physical therapist. The manual wheelchair is a medical device indicated for use by
persons with limited motion abilities who are unable to stand, walk and/or seat independently. It dedicated for
transportation and moving of such people in seating position.
3. Safety Warnings & Recommendations
Safety and quality standards
The ICON 35 wheelchair has passed all necessary tests and it is in conformity with following European Standards:
PN-EN 12182:2005; PN-EN 12183:2010; PN-EN 1021-1:2007; PN-ISO 7176-1,3,5,7,8,15.
The conformity is visible by the CE marking on the medical device. Upon a correct usage of the wheelchair we foresee
its failure-free work for years.
•The ICON 35 must not be loaded with more than 115 kg.
•The device must not be loaded for use in approved transport vehicles.
•Make sure that this User manual is read by all persons using the device. The manufacturer doesn’t take any
responsibility for damages and/or injuries, caused by the fact that the User manual has not been followed.
•Use the product only in good technical condition.
•Use the device only for the purpose it is intended for.
•Avoid making constructive changes on the device unless you have the manufacturer’s written acceptance for
such modifications.
•During different adjustments which are possible on the device the User must take care not to squeeze fingers
or other body parts between two moving elements of the device
•All wheels should ALWAYS be in contact with the floor during use. This will ensure the device is properly
balanced and should avoid incidents.
•When using the wheelchair in a stationary position, the hand brakes MUST be locked
•If defects or errors are detected, you must immediately contact your dealer.
•Follow the instructions and warnings on all product labels.
•The device must only be used on a stable surface.
•Avoid skin burns during usage of the chair in direct sunlight. Various parts of the product might become hot.
•It is not recommended to use the wheelchair on sand, in mud or in extreme weather conditions.
•The attendant of a wheelchair User should be in good shape.
•Do not remove by yourself any parts or accessories of the wheelchair. It may influence product's stability and
rigidity.
•Do not place the device near to the sources of heat or fire (fireplaces, ovens, heaters, stoves). It is not

Version 06/21 Page 4 of 23 ICON 35 UM EN
recommended to smoke cigarettes when seated on the wheelchair, it is not fire resistant.
•IF ANY SERIOUS INCIDENT OCCURES IN RELATION TO THE DEVICE PLEASE CONTACT YOUR
DEALER OR REHASENSE DIRECTLY (contact details at the end of the user manual). The immediate actions
should be taken according to the requirements of Regulation of the European Parliament and of the EU
Council 2017/745 on medical devices of April 5, 2017.
WARNING!
The wheelchair is not designed as a seating option for a User in moving vehicles
(like e.g. buses, trains, metro, airplanes etc.). It is forbidden to seat on the
wheelchair in moving vehicle. The wheelchair should be safely stowed and secured
for the time of transportation. The wheelchair User should be safely transferred and
seated in a prompt seating system included in the vehicle. It is a great risk of
serious incident, injuries and property damage to not follow above rule.
The design of the wheelchair because of its functions includes many moving
elements, slots, holes and gaps between device’s parts. There is a risk of body part
trapping during folding, unfolding and adjusting different elements of the
wheelchair. It specially concerns fingers or hands. It is also possible to have a
finger cut by moving parts of the device. Always be careful when you adjust or set
up a chair to not get your body parts squeezed and injured.
4. Product’s General Description
The ICON 35 wheelchair comes with a variety of features: parking brakes, detachable & height adjustable legrests,
detachable & height adjustable armrests (LX version only) and it is equipped with rear main wheels, front turning
casters, single cross brace frame. The device is made from powder coated aluminum tubing. It is well preserved
against corrosion. For some adjustments you will need some standard tools available in all hardware stores.
The wheelchair provides comfortable transportation and storage thanks to its solid cross frame structure, easiness of
maneuvering, easy transfer in and out of the wheelchair.
The wheelchairs are supplied in cartons, detached into few elements for easier transportation.
For standard equipped wheelchairs every package includes:
•1 Main cross frame with upholstery, 2 brakes, 2 armrests, 2 rear wheels & 2 front casters;
•2 detachable legrests with footplates;
•1 User Manual
A set of delivered additional equipment depends on order specification.

Version 06/21 Page 5 of 23 ICON 35 UM EN
Main components:
Above photo shows an example of wheelchair with all standard components and their position. The exact appearance
of your wheelchair and its features may differ from those shown above (depending on order specification), but their
names, functions and locations remain the same.
Optional equipment
Depending on version and order specification the wheelchair can be equipped with different wheels’ types, drum
brakes, single or double cross, elevating legrests, amputee legrests, hemiplegic armrests, anti-tipping wheels,
headrest, side supports, safety belt, seating cushion, backrest upholstery with tension adjustment, reclining backrest,
height adjustable push handles, stability cross bar, table, umbrella, infusion holder, crutch holder.
Wheelchair assembly:
We recommend the wheelchair to be assembled and set up by a professional before it is delivered to the end User.
•Take all the chair’s elements from the box and check if all components are included according to your order
specification. If you discover that some part is missing or damaged, do not continue the assembly process but
contact your dealer.
•Detachable components such as rear wheels, leg rests and all additional equipment should be attached and
adjusted in accordance with the information included in this User manual.
How to unfold and to fold the wheelchair
To fold: Take the cushion out. Flip up the foot plates.
Lift the upholstery of the seat (left picture).
To unfold: Place both hands on the seat upholstery
tubes and press them down (right picture). You
should be careful and not put your hand between the
tubes and the wheelchair frame when unfolding.
Padded
Backrest
Push Handle
with Brake
Control
Armrest –Fixed
for BX. Height
adjustable for
LX
Folding Cross
(under the seat)
Detachable
Legrest
Flip up
Footplate
Carrying Handle
Padded Seat
Rear Wheel
Parking Brake
Front Caster
Fixed Bolt Axle