Reinecker mezzo vario User manual

Please read this user
manual carefully prior to
installation, use and
maintenance for
your own safety and in
order to avoid damages
on your video magnifier.
Please read this user
manual carefully prior to
installation, use and
maintenance for
your own safety and in
order to avoid damages
on your video magnifier.
mezzo vario
EN
User manual

2

3

Contents
I. General information ...............................................................................................6
Notes on the electromagnetic compatibility (EMC) .....................................................6
Storage of the user manual.........................................................................................6
Product description......................................................................................................6
Medical device.............................................................................................................7
Purpose .......................................................................................................................7
Life span of product.....................................................................................................7
Safety advice...............................................................................................................7
Combination with other products.................................................................................7
Precautions by alteration of the performance of the system ......................................7
Reinstatement and installation ....................................................................................7
Cleaning of the system................................................................................................8
Special advice for transport and storage ....................................................................8
Disposal of the unit according to EU directive 2002/96/EEC......................................8
Power supply...............................................................................................................8
Safety instructions ......................................................................................................9
II. Instructions for the reading system mezzo vario ............................................10
Delivery content.........................................................................................................10
Optionally available ...................................................................................................10
Installation of the system...........................................................................................10
Connection of the unit ...............................................................................................11
Alignment of monitor .................................................................................................12
Description of the control elements...........................................................................13
Control panel base plate ....................................................................................13
ON/OFF (power switch)......................................................................................13
Light ON/OFF/Dimm...........................................................................................13
Indicator for rechargeable battery ......................................................................13
Control panel monitor................................................................................................14
Left button: ................................................................................................................14
Colour mode selection........................................................................................14
Menu selection ON/OFF.....................................................................................14
Central button:...........................................................................................................14
Adjustment of enlargement.................................................................................14
Autofocus ON/OFF .............................................................................................15
Overview mode...................................................................................................15
Right button: ..............................................................................................................15
Automatic colour saturation................................................................................15
Contrast/Brightness ............................................................................................15
Windowing and line marker ................................................................................15

Start-up mezzo vario .................................................................................................16
Mains operation.........................................................................................................16
Power ON ...........................................................................................................16
Power OFF .........................................................................................................16
Automatic save regulation for the device set-up.......................................................16
Replacement of lighting......................................................................................16
Mobility pack/Use of battery ......................................................................................17
Operation of rechargeable battery......................................................................17
Replace the rechargeable battery ......................................................................17
Use of battery .....................................................................................................17
Battery charging .................................................................................................18
Operating time once the battery had been fully charged ...................................18
Liability for defects on the battery ......................................................................18
Description of the menu settings...............................................................................18
Menu selection ...................................................................................................18
Adjust menu settings ..........................................................................................19
Explanation of the menu content........................................................................19
Menu settings .....................................................................................................19
Check list: in case problems occur ...........................................................................23
Technical characteristics ...........................................................................................24
Warranty Information.................................................................................................25
Notes .........................................................................................................................26

6
I. General information
Important notes on the operation of the reading system mezzo vario!
Please read them carefully prior to the operation of the reading system!
Notes on the electromagnetic compatibility (EMC)
This reading system is suited for use in all set-ups including the domicile that are
connected directly to a public power supply for buildings with residential purposes.
This reading system is designed for the use in the indicated electromagnetic envi-
ronment. The user should ensure the use in the indicated environment.
This reading system operates on HF-Energy exclusively for its own function.
Therefore the emitted interference of high frequency disturbances is very low and
the interference with other appliances operated close-by is improbable. When oper-
ating the reading system simultaneously with other systems, however, the possibility
of disturbances of the system or other systems should not be neglected.
For this reason it should be ensured that the system is not placed directly beside
or on top of another system. If the set-up of this system in the proximity of medi-
cal, measuring devices cannot be avoided, the operator of these devices has to be
informed that it is necessary to observe the performance of the system to control the
conventional use of the system in the chosen set-up.
Electronic devices are sensitive towards electric discharge and towards high
frequency electro-magnetic fields.
Attention: In order to avoid high-frequency disturbances the operator should respect
a minimum distance of one meter to portable and mobile HF-telecommunication
devices.
The device may not be used in the patients environment.
Storage of the user manual
The user manual is an essential part of your reading system. Please keep the book
in a safe place for future reference.
Product description
mezzo vario is an opto-electronic reading system, which magnifies text and pictures.
It may be used permanently for private and professional appliance. The text or pictures
are being captured by the integrated camera and then displayed on the monitor.
●The transportable and compact reading system mezzo vario convinces by pin
sharp pictures in HD+quality (1366 x 768 pixels).
●The Vario camera offers a mangification range from approx. 1x to 100x by offering
reduced noise and almost no reflections even when reading glossy papers.
●Thanks to the easy movement of the monitor into three directions, the user will
always read in the most ergonomic position.

7
Medical device
This reading system is classified as a Medical Device, class I according to 93/42/EEC,
annexe IX, standard 12. For the distribution to countries outside the EU the respec-
tive country-specific guidelines have to be regarded.
Purpose
This opto-electronic reading system is a medical device to assist with the reading
and magnifying of printed text and pictures. Visually impaired people can compen-
sate for their loss of visual acuity by using this device.
Life span of product
Seven years from the date of invoice (ex Reinecker). According to MDD the supplier
of medical devices is obliged to define the life span of a product.
Note: The mentioned life span does not reflect the absolut life span of the mezzo vario.
It is rather an indication on when the product might be obsolete and substitution might
be recommended due to new product developments.
Safety advice
mezzo vario has to be installed in closed and dry rooms only. Do not plug mezzo vario
into an electrical circuit that is also being used for any life sustaining or support sys-
tems. The device may not be used in the patients environment.
This device should not be operated in explosion-endangered environments. This
opto-electronic device should only be installed in conjunction with modern electrical
circuitry. It is a device of protection class II. The openings in the casing ensure opti-
mum cooling and must not be covered.
Combination with other products
Warning: This reading system must not be located directly beside, next or on top of
another medical device. If the device is used near another electrical device, monitor
the other device to ensure that it is working properly. In case of doubt please contact
Reinecker Vision GmbH or any licensed distribution partner.
Precautions by alteration of the performance of the system
Stop using the reading device if technical features or performances should change.
Switch the device off and disconnect the power supply from the mains wall socket.
Refer directly to your authorized dealer or to Reinecker Vision GmbH Service Center.
Reinstatement and installation
This device may be technically maintained and reconditioned by Reinecker Vision
GmbH only or by an authorized technician. Reinstatement may only take place after
the system has been cleaned and safety checked.

8
Cleaning of the system
●mezzo vario has to be disconnected from the power supply before cleaning.
●The monitor and the system has to be cleaned with glass cleaner.
●Interior of device must NOT come in contact with liquids.
Special advice for transport and storage
For reasons of safety, the unit must only be transported and stored in the original
packing. The unit must be stored in dry and closed rooms in the original packing.
The following conditions for transport and storage have to be respected:
●Air pressure 700 - 1000 hPa
●Temperature range +5° to + 50°
●Relative air humidity 30% to 80%
Disposal of the unit according to EU directive 2002/96/EEC
mezzo vario contains electronic components. In order to avoid damage to the envi-
ronment, the country-specific rules have to be respected.
Power supply
Only use the original power supply which is included in the delivery by Reinecker
Vision GmbH.
Caution: The use of any other equipment might lead to an increased electro-
magnetic emission and to a product damage.

9
Safety instructions
Please respect the following safety instructions:
1. Do not plug the AC adapter into a faulty electrical outlet. Doing so may cause
electrical shock or fire.
2. Do not touch the AC adapter with wet hands.
3. Only use the original power supply which is included in the delivery by Reinecker
Vision GmbH. The use of any other equipment might lead to a product damage.
4. Only use the original accumulator which is included in the delivery by Reinecker
Vision GmbH. The use of any other equipment might lead to a product damage.
5. Do not expose the system to direct sunlight or to very hot or cold environment,
as this would harm the picture quality.
6. Do not use this device below +5°C or above +40°C.
7. No liquids must reach the interior of the system. Only use the device in a dry
environment.
8. The device may not be used next to medical devices (patients environment).
9. Do not lean on the screen, touch the screen with any object or lay heavy objects
on the device. This may cause damage to the device.
10. Do not try to repair or to dismantle the system by your own. This would automati-
cally void the warranty. If you need any technical assistance please get in contact
with the local distributor or with Reinecker Vision GmbH.
11. Always switch OFF the system and disconnect it from the power supply before
cleaning it. For cleaning please use the screen cleaning cloth or any other soft,
lint-free, lightly moistened cloth. Do not use alcohol-containing cleaning supplies.

10
II. Instructions for the reading system mezzo vario
Delivery content
●Reading system mezzo vario
●Power adapter 12V DC / 5000mA
●Adapter cable (country-specific)
●User manual
●Information sheet for repair cases
Optionally available
●Mobility pack (battery and carrying case)
●xy-table
Installation of the system
Your reading system will normally be unpacked and set up by the supplier’s repre-
sentative. If you have not purchased an optionally available stand that fits to the
product you must provide a solid surface for the system with sufficient surface area.
Erect your mezzo vario as described below:
●Folded mezzo for transport
●Bring the monitors arm in the upright
position until it snaps in
Interlock
release
Battery
(optional)
Power supply
Operation buttons
located on the base plate

11
Connection of the unit
Connect the power supply to a mains wall socket and plug the adapter end of the
cord into the DC12V power supply socket located on the base plate of the mezzo vario.
Note: The delivered power cable is to be used exclusively in connection with the
mezzo vario.
Once the device is plugged in, it is ready to use.
Camera
●Release the locking lever in order to
move the monitor into the upright posi-
tion. Use the integrated grip to do so.
LED Light
open close
●The locking lever can be brought
into the desired position, by pulling
it out.
Control
panel
locking lever
Electrical outlet
Power supply
Adapter cable

12
Alignment of monitor
Due to the monitor’s technology contrast and brightness change depending on the
angle of view.
The highly flexible three-dimensional monitor arm enables the user to adjust the
monitors height and angle according to their best ergonomic position.
●The monitor can be rotated anticlock-
wise by 90 degrees in order to make
column reading easier.
The image will adapt automatically
to the monitors position.
●The monitor can be moved
vertically up and down.
●The monitor can be tilted up or down.
rotatable
by 90
degrees

13
Description of the control elements
Control panel base plate
ON/OFF (power switch)
By pressing the power switch on the right side of the base plate the
electronic magnifier is switched on.
Attention: If there is no light after the unit has been turned ON, press the
“light” button (see Light ON/OFF/Dimm). If there is still no light, double
check if the power cable has been connected correctly and if there comes
electricity from the wall socket.
Light ON/OFF/Dimm
●Switch between full light and dimmed light, by pressing the black
button briefly.
●Turn OFF the light by pressing and holding the black button for some
seconds.
●Turn ON the light again by pressing the black button briefly.
Note: Whenever the mezzo vario will be turned ON, the maximum light
will be activated.
Indicator for rechargeable battery
Only operates with built-in battery, see page 17
(mobility pack/ use of battery).

14
Control panel monitor
Left button:
Colour mode selection
By turning the colour mode selection-button from the left to the right the following
colour modes can be selected:
Position 1: full colour display
Position 2: black font, white background
Position 3: white font, black background
Position 4: green font, black background
Position 5: yellow font, black background
Position 6: yellow font, blue background
The chosen colour mode appears temporarily on the lower side of the screen (when
activated).
Note: The above mentioned colour combiniations correspond to the factory settings.
However, the user can reduce those colour combinations in the user menu. When
reducing the colour combinations, the colour selection button split the remaining col-
our combinations evenly.
Menu selection ON/OFF
When pushing the left button for approx. 2 seconds the internal menu will be shown
on the screen. Press and hold it again for approx. 2 seconds, until the internal menu
will disappear.
Central button:
Adjustment of enlargement
By turning the central button (from left to right) text and pictures can be
zoomed in an out continuously.
Magnification range is from approx. 1x to 100x, however, it’s dependent
from the distance between the camera and the object to be displayed.
The last magnification set will be memorised and displayed when
turning mezzo vario ON again.
The current magnification will be displayed briefly at the downside of
the screen (this display can be deactivated in the user menu).
Colour selection
Menu selection ON/OFF
Magnification/Zoom
Autofocus
Overview Mode
Brightness/Contrast
Line marker/Shadowing

15
Note: The camera is equipped with an autofocus. When turning the central button
to the maximum magnification, objects of a height of approx. 7cm shall be displayed
sharply. Sharpness can be enhanced in the internal menu or when switching to artifi-
cial colour mode.
Autofocus ON/OFF
By briefly pressing and releasing the central (“zoom”) button you can activate/deacti-
vate the automatic focus. By having the autofocus activated the camera adjusts the
picture sharpness automatically.
Overview mode
When you are reading at a higher magnification level and want to find out which part
of the page you have reached this function helps you to get the overview.
Press the central („zoom“) button for approximately 2 seconds until the overview
mode is activated. The image on the screen will minimise and you will see an over-
view of the whole document/image/printed text. A faded cross will appear and indi-
cate the area that is currently being magnified. Once the central button is released it
will return back to the reading mode and selected magnification level.
Right button:
Automatic colour saturation
Brightness and colour saturation are automatically adjusted, colours are displayed
true to original.
Contrast/Brightness
By turning the button on the right, contrast and brightness can be
adjusted.
Windowing and line marker
By pressing and turning this button, Windowing and line marker will be activated.
To deactivate those functions, press the button again.

16
Start-up mezzo vario
Mains operation
Check if the power adapter is connected with the mains and the power supply
socket (12 VDC) of the mezzo vario.
Power ON
Press the ON/OFF button to switch on the device. When the mezzo vario and the
base plate is illuminated, you can put a page or an object onto the table.
All the optional settings – for example zoom, colour or brightness- can be adjusted
individually.
Power OFF
Switch off the device by pressing the ON/OFF button.
Automatic save regulation for the device set-up
When you reset the device all settings used before will be activated again.
Replacement of lighting
The electronic magnifier is equipped with a high power LED Illumination. If replace-
ment of the lamp is required it should only be done by a specialist or by Reinecker
Vision GmbH.
Important note:
Please only use the power supply included in the delivery. Use of any other
power supply will void the warranty.

17
Mobility pack/Use of battery
A mobility pack (battery and carrying case incl. shoulder strap) can be ordered
optionally.
Operation of rechargeable battery
Attention: In order to assure a long life span of the rechargeable battery you must
follow the instructions for charging and operating the battery:
●The battery is only fully charged once the yellow charging light turns off.
●If mezzo vario will not be used for a long time, please charge the battery
completely. Even if switched off, mezzo vario may discharge. Total discharge
might damage the battery.
Replace the rechargeable battery
●You must only use the original rechargeable battery.
●Replacement batteries can be ordered through Reinecker Vision GmbH.
Article number: (MEZVARAK)
●The use of other rechargeable batteries will damage the system.
All warranties for mezzo vario will then be voided.
●To change the battery, please take it out first by pulling it out and put the new
battery in until you recognize it locks.
●optionally the battery pack can be covered by a panel.
Use of battery
●plug-in power supply is not connected
●keep pressing the ON/OFF button for approx. 1 second; device is ready to be
used
●after switching on the system, the battery indicator is shown on the display for
approx. 6 seconds
●flashing of the battery indicator: battery is empty and has to be re-charged.
There is a remaining time of a few minutes before the electronic magnifier
switches itself off
●Make sure the battery will be charged before use

18
Battery charging
●when the battery indicator flashes or the electronic magnifier has turned itself off
●connect plug-in-power supply
●battery is being charged; the yellow LED lights up
●when fully charged, the yellow LED disappears
●mezzo vario can be used again in battery mode
●mezzo vario can be used and operated whilst it is being charged
Operating time once the battery had been fully charged
●With a 16" class monitor: approx. 2,5 hours, depending on illumination used
●With a 19" class monitor, approx. 2 hours (depending on the illumination used)
●Charging time is approx. 3,5 hours, when the unit is turned OFF
Liability for defects on the battery
Batteries are subject to wear and tear and are thus excluded from liability.
Description of the menu settings
Menu selection
Press the colour selection button for approx. 2 secs until the menu
appears on the screen.
Main Menu
Brightness +10
Contrast +50
Color Saturation - 30
Ruler / Mask Aus
Ruler / Mask Settings...
AF Mode Continuous/Zoom
Reset to Factory Settings
Recall User Settings...
Advanced Settings...
Exit

19
Adjust menu settings
Turn the central zoom button in order to navigate through the
menu.
Press the central zoom button in order to open the menu selection.
Turn the central zoom button in order to change menu settings.
Press the central zoom button in order to confirm menu settings.
Navigate to “exit menu” in order to quit OR keep the colour selection
button pressed for approx. 2 secs until the menu will disappear from
screen.
Explanation of the menu content
The image shows in detail how the menu is structured.
Menu settings
Main Menu
Brightness adjustment range from -50 to +50
Contrast adjustment range from -50 to +50
Color Saturation adjustment range from -50 to +50
Ruler / Mask OFF | deactivate line marker and shadowing
Ruler | activate line marker
Mask | activate shadowing
Main Menu Menu level 1
Advanced Settings Menu level 2
Special Settings Menu level 3
Customize Buttons Menu level 4
Function adjustment range | explication

20
Main Menu
Ruler / Mask Settings
Ruler / Mask OFF | deactivate line marker and shadowing
Ruler | activate line marker
Mask | activate shadowing
Ruler Position 0 to 100 | adjust line marker position
Mask Position 0 to 100 | adjust shadowing
Ruler Mode Horizontal | anlign line marker horizontally
Vertical | anlign line marker vertically
Mask Mode Left/Right | Shadowing left/right;
shadowing up to 50%
Top/Bottom | Shadowing top/bottom;
shadowing up to 50%
Left/Right FS | Shadowing left/right;
shadowing up to 90%
Top/Bottom FS | Shadowing top/bottom;
shadowing up to 90%
Full-Screen | Shadowing covers whole screen
Mask Transparency 50% | 25% | 0%
Main Menu
Ruler / Mask Settings
Ruler Color
Red adjustment range from 0 to 31
Green adjustment range from 0 to 31
Blue adjustment range from 0 to 31
Return
Main Menu
AF Mode Continuous | Semi-Autom. + Zoom |
Continuous / Zoom
Reset to Factory Settings Return to factory settings
Recall User Settings Return to customer selected settings
Advanced Settings (see overview)
Exit