Reiner B2 User manual

www.reiner.de
Award for
Operational
Excellence
Bedienungsanleitung
Operating instructions
Mode d’emploi
Manual de instrucciones
Istruzioni per l’uso
Instruções de utilização
Instrukcja obsługi
Руководствопоэксплуатации
D
GB
F
E
I
P
PL
RUS
B2

Vielen Dank, dass Sie sich für ein Original
REINER Produkt entschieden haben.
Thanks a lot for making your mind for an
original REINER product.
Merci infiniment d’avoir choisi un produit
Original REINER.
Muchas gracias por haberse decidido por
un producto original de REINER.
Vi ringraziamo per aver optato per un
prodotto originale REINER.
Muito obrigado por ter optado por um
produto REINER original.
Dziękujemy Państwu za to, że zdecydowali
sięPaństwo na zakupienie oryginalnego
produktu REINER.

Благодаримзавыбороригинальной
продукцииREINER.
Ernst Reiner GmbH & Co. KG

1
2
3
4
5

GB GB
To set the stamp wheels _Fig. 1+ 2
uPress the handle to the bottom of its
travel, then while still holding it.
uPress and hold button on the front plate.
uAllow the handle to move upwards until
the handle locks in place.
uYou will be able to move the stamp wheels
freely with the stylus .
You can hide preceding zeros in a number!
Example: 49 instead of 000049
uTurn the stamp wheel with stylus to
digit position “0”.
uUsing stylus rotate and push down on
stamp wheel through a half digit
position until it sinks below print height.
uTo return to the print position, simply push
down on handle .
uAny wheel which has been ‘sunk’ will
automatically be brought to print height
as the numbering sequence progresses.
‘Sunk’ wheels can be brought into play
by simply rotating them further
(ie. push towards figure 1.).
To insert the inkpad _Fig. 1+ 3
Handle with caution to avoid dirt from ink!
uPress the handle to the bottom of its
travel, then, while still holding it.
uPress the button on the front plate and
continue to hold it pressed.
uAllow the handle to move upwards until
the handle locks in place.
uUnpack the inkpad carefully.
uSqueeze the grips on the back of the
inkpad and hold them.
uResting the back of the ink pad inside the
pad cradle slide the pad into the slot of
the stamp.
uIn order to return to the print position,
simply push down on handle .
To change the numbering actions _Fig. 4
Actions
0The same number is stamped every time.
1Number increases after each stamping
process.
2Number increases after every 2nd
stamping process.
etc.
uRaise the Action selector lever and move
it to the desired action.
To park the stamp _Fig. 5
To prolong the life of the inkpad,
park the stamp!
uPress and hold button on the front plate.
uGently push handle downwards until the
stamp clicks & locks in a raised position.
uIn order to return to the print position,
simply push down on handle .
A
A
A
A
A
A
A
A
B
B
B
C
C
D
D
F
G
E
D
C