GB GB
To set the stamp wheels _Fig. 1+ 2+ 3
uPress the handle to the bottom of its
travel, then while still holding it.
uPress and hold button on the front plate
uAllow the handle to move upwards until
the handle locks in place.
uYou will be able to move the stamp wheels
freely with the stylus .
uIn order to return to the print position,
simply push down on handle .
You can easily place the date one day further
ahead! (Not valid for the stamp Model N41a.)
uPress the switch button once.
To insert the inkpad _Fig. 1+ 4
Handle with caution to avoid dirt from ink!
uPress the handle to the bottom of its
travel, then, while still holding it.
uPress the button on the front plate and
continue to hold it.
uAllow the handle to move upwards until the
handle locks in place.
uUnpack the inkpad carefully.
uSqueeze the grips on the back of the
inkpad and hold them.
uResting the back of the ink pad inside the
pad cradle slide the pad into the slot of
the stamp.
uIn order to return to the print position,
simply push down on handle .
To change the numbering actions _Fig. 3
Actions
0The same number is stamped every time.
1Number increases after each stamping
process.
2Number increases after every 2nd
stamping process.
etc.
uPress the switch lever and slide it to the
desired action.
To park the stamp _Fig. 5
To prolong the life of the inkpad,
park the stamp!
uPress and hold button on the front plate.
uGently push handle downwards until the
stamp clicks & locks in a raised position.
uIn order to return to the print position,
simply push down on handle .
A
A
A
A
A
B
B
F
A
B
I
J
E
CD
A
A
